Preparation and electrical properties of sintered oxide composed of MnFeNiO4 with a cubic spinel structure
- 220 Downloads
- 4 Citations
Abstract
The preparation and electrical properties of a sintered body consisting of cubic spinel oxide MnFeNiO4 were investigated. A sintered body with cubic spinel and NaCl-type oxides prepared at 1400 °C in Ar could be converted to one consisting of monophase cubic spinel oxide by oxidation at 1000 °C for more than 48 h in air. The electrical conductivity of a sintered body consisting of monophase cubic spinel oxide was confirmed to increase exponentially with increasing temperature, indicating that the oxide has intrinsic negative temperature coefficient (NTC) thermistor characteristics. The electrical conduction of the oxide was concluded to be controlled by the small polaron hopping mechanism. Changes in electrical conductivity, mobility, and charge carrier jump frequency in temperature dependence at 400 °C are assumed to be related to the variation in cation distribution accompanying the disproportionation of Mn ions.
Keywords
Mn-Fe-Ni monophase cubic spinel oxide Electrical conductivity Seebeck coefficient Small polaron hopping NTC thermistorReferences
- 1.T. Yokoyama, K. Kondo, K. Komeya, T. Meguro, Y. Abe, T. Sasamoto, J. Mater. Sci. 30, 1845 (1995)CrossRefGoogle Scholar
- 2.T. Yokoyama, Y. Abe, T. Meguro, K. Komeya, K. Kondo, S. Kaneko, T. Sasamoto, Jpn. J. Appl. Phys. 35, 5775 (1996)CrossRefGoogle Scholar
- 3.T. Yokoyama, T. Meguro, T. Morita, Y. Abe, J. Tatami, K. Komeya, Y. Kumashiro, J. Aust. Ceram. Soc. 36, 133 (2000)Google Scholar
- 4.T. Yokoyama, T. Meguro, J. Mater. Sci. Soc. Jpn. 48, 237 (2011)Google Scholar
- 5.J. Töpfer, A. Feltz, P. Dordor, J.P. Doumerc, Mater. Res. Bull. 29, 225 (1994)CrossRefGoogle Scholar
- 6.T. Battault, R. Legros, A. Rousset, J. Mater. Synth. Process. 4, 361 (1996)Google Scholar
- 7.A. Feltz, W. Pölzl, J. Euro. Ceram. Soc. 20, 2353 (2000)CrossRefGoogle Scholar
- 8.W.A. Groen, C. Metzmacher, P. Huppertz, S. Schuurman, J. Electroceram. 7, 77 (2001)Google Scholar
- 9.Z. Wang, C. Zhao, P. Yang, A.J.A. Winnubst, C. Chen, J. Euro. Ceram. Soc. 26, 2833 (2006)CrossRefGoogle Scholar
- 10.T. Yokoyama, R. Ichida, S. Morimoto, S. Okazaki, D. Ito, Y. Koshiba, T. Meguro, J. Mater. Sci. Soc. Jpn. 49, 276 (2012)Google Scholar
- 11.N. Cusack, P. Kendall, Proc. Phys. Soc. 72, 898 (1958)CrossRefGoogle Scholar
- 12.R.D. Shannon, Acta Cryst. A32, 751 (1976)Google Scholar
- 13.M.J. Sinnott, The solid state for engineers (Wiley, New York, 1958), p. 369Google Scholar
- 14.A. Amin, R.E. Newnham, in Electronic ceramic materials, ed. by J. Nowotny (Trans Tech Publications Ltd, Switzerland, 1992), p. 339Google Scholar
- 15.G.H. Jonker, S. Van Houten, in Halbleiterprobleme, ed. by F.S. Köhn (Frieder Vieweg & Sohn, Braunschweing, 1961), p. 118Google Scholar
- 16.S.P. Mitoff, Progr. Ceram. Sci. 4, 217 (1966)Google Scholar
- 17.G.W. Rathenad, J.B. Goodenough, J. Appl. Phys. 39, 403 (1968)CrossRefGoogle Scholar
- 18.J.B. Goodenough, Progr. Solid State Chem. 5, 145 (1971)CrossRefGoogle Scholar
- 19.P. Johannesen, J. Kofstad, Mater. Educ. 7, 915 (1985)Google Scholar
- 20.A.J. Moulson, J.M. Herbert, Electroceramics (John Wiley & Sons Ltd., England, 2003), p. 5CrossRefGoogle Scholar
- 21.P.A. Cox, The electronic structure and chemistry of solids (Oxford University Press Inc., New York, 1987), p. 195Google Scholar
- 22.V.A.M. Brabers, J.C.J.M. Terhell, Phys. Stat. Sol. (A) 69, 325 (1982)CrossRefGoogle Scholar