Effect of Co(NO3)2·6H2O thermal decomposition temperature on the nano-Co3O4 product morphology and electrocatalysis of water oxidation
- 17 Downloads
Herein, we report the electrochemical water oxidation efficiency of nano-Co3O4 catalyst samples obtained by the thermal decomposition of Co(NO3)2·6H2O at various temperatures (320, 420, 520, and 620 °C). The structural and morphological details of the synthesized samples were determined by employing X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. These studies revealed the formation of well-dispersed nano-Co3O4 particles with sizes, shapes, and crystallinity levels that differed for the different decomposition temperatures. The prepared catalysts were immobilized on filter-paper-derived carbon electrodes for checking their electrochemical properties. The electrochemical efficiency levels of the Co3O4 catalyst samples were evaluated by employing each of them as an anode to study the water oxidation reaction. The nano-Co3O4 sample prepared at 420 °C yielded the highest efficiency and good stability towards the water oxidation reaction. The higher efficiency of this sample was attributed to the relatively small average size and low level of agglomeration of its nanoparticles, and to the high electrochemically active surface area of its electrode.
Different morphology and crystallinity of nano-Co3O4 were prepared by simple and straightforward thermal decomposition of Co(NO3)2·6H2O for electrochemical water oxidation. The nano-Co3O4 prepared at 420 °C showed the highest efficiency and good stability towards water oxidation.
KeywordsCo(NO3)2·6H2O Thermal decomposition temperature Nano-cobalt oxide Filter-paper-derived carbon electrode Oxygen evolution
The authors acknowledge the support from the Center of Research Excellence in Nanotechnology (CENT) at the Research Institute of King Fahd University of Petroleum and Minerals in the Kingdom of Saudi Arabia.
- 2.Duan H, Li D, Tang Y, He Y, Ji S, Wang R, Lv H, Lopes PP, Paulikas AP, Li H, Mao SX, Wang C, Markovic NM, Li J, Stamenkovic VR, Li Y (2017) High-performance Rh2P electrocatalyst for efficient water splitting. J Am Chem Soc 139(15):5494–5502. https://doi.org/10.1021/jacs.7b01376 CrossRefPubMedGoogle Scholar
- 15.Aziz MA, El Madkhoum A, Hakeem AS, Shaikh MN, Rehman AU, Yamani ZH (2017) Effect of Mn precursors on the morphology and electrocatalytic activity toward water oxidation of micro-nanostructured MnOx films prepared by voltammetric deposition. J Mater Sci: Mater Electron 28(24):18463–18473. https://doi.org/10.1007/s10854-017-7793-6 CrossRefGoogle Scholar
- 16.Najafpour MM, Renger G, Hołyńska M, Moghaddam AN, Aro EM, Carpentier R, Nishihara H, Eaton-Rye JJ, Shen JR, Allakhverdiev SI (2016) Manganese compounds as water-oxidizing catalysts: from the natural water-oxidizing complex to nanosized manganese oxide structures. Chem Rev 116(5):2886–2936. https://doi.org/10.1021/acs.chemrev.5b00340 CrossRefPubMedGoogle Scholar
- 18.Hamdani M, Singh R, Chartier P (2010) Co3O4 and Co-based spinel oxides bifunctional oxygen electrodes. Int J Electrochem Sci 5(4):556–577.Google Scholar
- 28.Zhao J, Zou Y, Zou X, Bai T, Liu Y, Gao R, Wang D, Li GD (2014) Self-template construction of hollow Co3O4 microspheres from porous ultrathin nanosheets and efficient noble metal-free water oxidation catalysts. Nanoscale 6(13):7255–7262. https://doi.org/10.1039/C4NR00002A CrossRefPubMedGoogle Scholar