Advertisement

International Applied Mechanics

, Volume 43, Issue 11, pp 1236–1247 | Cite as

Stability of longitudinally corrugated cylindrical shells under uniform surface pressure

  • N. P. Semenyuk
  • I. Yu. Babich
Article

Abstract

The buckling problem for longitudinally corrugated cylindrical shells under external pressure is solved. The solution makes practically exact allowance for the geometry and buckling modes of the shell. The inaccuracy of the results is due to the assumption that the subcritical state is momentless. Shells consisting of cylindrical panels of smaller radius and noncircular shells with sinusoidal corrugations are analyzed for stability. The practical applicability of such shells is demonstrated

Keywords

stability of cylindrical shell longitudinal corrugation external pressure critical loads cylindrical panels 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    L. E. Andreeva, “Design of corrugated membranes as anisotropic plates,” Inzh. Sb., 21, 128–141 (1955).Google Scholar
  2. 2.
    G. I. Brankov, “Toward a theory of wavy shells,” Int. Appl. Mech., 34, No. 3, 334–339 (1998).Google Scholar
  3. 3.
    D. V. Vainberg, P. M. Sazonov, and P. I. Semenov, “Design of corrugated shells,” in: A. A. Umanskii (ed.), Design of Space Structures [in Russian], Issue 7, Gosstroiizdat, Moscow (1962), pp. 49–71.Google Scholar
  4. 4.
    Ya. M. Grigorenko and N. N. Kryukov, Numerical Solution of Static Problems for Flexible Layered Shells with Variable Parameters [in Russian], Naukova Dumka, Kyiv (1988).Google Scholar
  5. 5.
    V. I. Gulyaev, V. A. Bazhenov, and E. A. Gotsulyak, Stability of Nonlinear Mechanical Systems [in Russian], Vyshcha Shkola, Lviv (1982).Google Scholar
  6. 6.
    G. L. Komissarova, “Stability of a longitudinally corrugated cylindrical shell with and without stiffening rings,” in: Proc. 4th All-Union Conf. on the Theory of Shells and Plates [in Russian], Nauka, Moscow (1963), pp. 567–571.Google Scholar
  7. 7.
    A. N. Krylov, Lectures on Approximate Calculations [in Russian], Gostekhizdat, Moscow-Leningrad (1950).Google Scholar
  8. 8.
    Kh. M. Mushtari and K. Z. Galimov, Nonlinear Theory of Elastic Shells [in Russian], Tatizdat, Kazan (1957).Google Scholar
  9. 9.
    V. V. Novozhilov, Theory of Thin Shells [in Russian], Sudpromgiz, Leningrad (1962).Google Scholar
  10. 10.
    A. A. Podorozhnyi, “Data for design of a shell with a corrugation subjected to compression and shear,” Tr. TsAGI, 520, 48 (1940).Google Scholar
  11. 11.
    N. P. Semenyuk, “Stability of noncircular cylindrical shells under axial compression,” Int. Appl. Mech., 20, No. 9, 813–821 (1984).zbMATHGoogle Scholar
  12. 12.
    N. P. Semenyuk, “Stability of axially compressed noncircular cylindrical shells consisting of panels of constant curvature,” Int. Appl. Mech., 39, No. 6, 726–735 (2003).CrossRefMathSciNetGoogle Scholar
  13. 13.
    W. Flügge, Statics and Dynamics of Shells [in German], Springer, Berlin (1962).Google Scholar
  14. 14.
    V. I. Shalashilin, “Stability and postcritical deformation of corrugated cylindrical shells,” Izv. AN SSSR, Mekh., No. 3, 131–135 (1965).Google Scholar
  15. 15.
    Ya. M. Grigorenko and S. N. Yaremchenko, “Refined design of corrugated noncircular cylindrical shells,” Int. Appl. Mech., 41, No. 1, 7–13 (2005).CrossRefGoogle Scholar
  16. 16.
    Ya. M. Grigorenko, A. Ya. Grigorenko, and L. I. Zakhariichenko, “Stress analysis of noncircular cylindrical shells with cross section in the form of connected convex half-corrugations,” Int. Appl. Mech., 42, No. 4, 431–438 (2006).CrossRefGoogle Scholar
  17. 17.
    Ya. M. Grigorenko, A. Ya. Grigorenko, and L. I. Zakhariichenko, “Stress-strain solutions for circumferentially corrugated elliptic shells,” Int. Appl. Mech., 42, No. 9, 1021–1028 (2006).CrossRefGoogle Scholar
  18. 18.
    Ya. M. Grigorenko and I. V. Kharitonova, “Solution of the deformation problem for flexible noncircular cylindrical shell subject to bending moments at the edges,” Int. Appl. Mech., 42, No. 11, 1278–1284 (2006).CrossRefGoogle Scholar
  19. 19.
    N. P. Semenyuk and N. A. Neskhodovskaya, “Stability of orthotropic corrugated cylindrical shells,” Int. Appl. Mech., 37, No. 11, 1447–1457 (2001).CrossRefGoogle Scholar
  20. 20.
    N. P. Semenyuk and N. A. Neskhodovskaya, “Timoshenko-type theory in the stability analysis of corrugated cylindrical shells,” Int. Appl. Mech., 38, No. 6, 723–730 (2002).CrossRefGoogle Scholar
  21. 21.
    N. P. Semenyuk and N. A. Neskhodovskaya, “On design models in stability problems for corrugated cylindrical shells,” Int. Appl. Mech., 38, No. 10, 1245–1252 (2002).CrossRefGoogle Scholar
  22. 22.
    K. P. Soldatos, “Mechanics of cylindrical shells with non-circular cross-section: A survey,” Appl. Mech. Rev., 52, No. 8, 237–273 (1999).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, Inc. 2007

Authors and Affiliations

  • N. P. Semenyuk
    • 1
  • I. Yu. Babich
    • 1
  1. 1.S. P. Timoshenko Institute of MechanicsNational Academy of Sciences of UkraineKyiv

Personalised recommendations