Advertisement

Conformance Test of AUTOSAR Network Management

  • Feng Luo
  • Yueyin Xie
Article
  • 43 Downloads

Abstract

This paper focuses on designing an approach for the conformance test of AUTOSAR network management (NM). After analyzing the state machine of the NM module, a new approach based on the virtual network simulation is proposed according to the characters of the NM module. In this approach, a network simulation environment is created for DUT, in which some virtual nodes run according to the NM protocol, and the transitions among different NM modes are driven by the test scripts. During the test, the software monitor records all the data to check the conformation of the DUT. After all the research above, a certain type body controller module from an OEM is selected to verify the validity of the new approach. The result of the test showed that this approach is effective for the conformance test of AUTOSAR NM.

Keywords

AUTOSAR Network management Conformance test Virtual network simulation 

References

  1. 1.
    AutoSAR Partners. AUTOSAR_SWS_LIN Network Management V2.0. http://www.AutoSAR.org. 2011-10.
  2. 2.
    R. Svenningsson, R. Johansson, T. Arts, et al., Formal Methods Based Acceptance Testing for AUTOSAR Exchangeability, SAE International Journal of Passenger Cars—Electronic and Electrical Systems, Vol. 5, No. 1, pp. 209–213, 2012.CrossRefGoogle Scholar
  3. 3.
    R. Belschner, S. Herz and D. I. J. Rein, AUTOSAR methodology in practice, ATZextra Worldwide, Vol. 18, No. 9, pp. 104–106, 2013.CrossRefGoogle Scholar
  4. 4.
    AutoSAR Partners. AUTOSAR_SWS_CAN Network Management V3.5. http://www.AutoSAR.org. 2013-10.
  5. 5.
    A. Y. Cheng, R. G. Wang, Y. F. Li, et al., Research and implementation of AUTOSAR NM mechanism in FlexRay network on electronic vehicle motor drive control system, Sensors & Transducers, Vol. 25, pp. 169–174, 2013.Google Scholar
  6. 6.
    AutoSAR Partners. AUTOSAR BSW&RTE Conformance Test Specification Part1-4. http://www.AutoSAR.org. 2013-10.
  7. 7.
    T. W. Awan, A. M. Abed, I. Kim et al, CAN based conformance testing using TTCN-3, Vol. 3, No. 6, pp. 417–423, 2014.Google Scholar
  8. 8.
    Wenzhi Tan, Jishun Kuang, Dezhi Wang and Renfa Li, Research of the conformance testing of AUTOSAR, Computer Engineering, Vol. 38, No. 4, pp. 43–45, 2012.Google Scholar
  9. 9.
    Dezhi Wang, Jishun Kuang and Wenzhi Tan. Confotmance testing for the car lights system based on AUTOSAR standard. In 2011 IEEE 3rd International Conference on Communication software and Networks. Location unknown: IEEE, pages 27–29, 2011.Google Scholar
  10. 10.
    Y. Zhou, X. X. Zhang and L. R. Chen, Implementation method of adapter in AUTOSAR conformance test, Computer Engineering, Vol. 40, No. 1, pp. 291–294, 2014.Google Scholar
  11. 11.
    H. Rong, X. Wang and C. Wang, Implementation of the direct network management function based on OSEK standard. Electronic Measurement Technology, 2017.Google Scholar
  12. 12.
    Sangrok Han, Hyogon Kim, On AUTOSAR TCP/IP performance in in-vehicle network environments. IEEE Communications Magazine, Vol. 54, No. 12, pp. 168–173, 2016-12.Google Scholar
  13. 13.
    Yu Zhang Jianjun, Zhang Benhong Ping and Wang Yufei, Improved method of AUTOSAR in-vehicle network management[J], Journal of Electronic Measurement and Instrument, Vol. 27, No. 11, pp. 1093–1098, 2013.Google Scholar
  14. 14.
    Hu Qi, Li Hong, Wu Zhao Mingde, Yao Dongwei Feng and Fang Zheng, Design and implementation of ECU software for electronic gasoline engine based on AUTOSAR, Journal of Zhejiang University (Engineering Science), Vol. 25, No. 6, pp. 1119–1123, 2011.Google Scholar
  15. 15.
    H. Cao, Z. Yao, Q. H. Deng et al. The design of violation vehicle management system based on MAS cooperation. In IEEE International Conference on Computer Science and Automation Engineering. IEEE, pages 457–462, 2011.Google Scholar
  16. 16.
    K. Hansch, A. Pelzer, P. Komarnicki et al, An ISO/IEC 15118 conformance testing system architecture. In Pes General Meeting|Conference & Exposition. IEEE, pages 1–5, 2014.Google Scholar
  17. 17.
    Y. H. Lee, H. K. Jin and J. W. Jeon, Applying AUTOSAR network management in OSEK/VDX for compatibility of AUTOSAR and OSEK/VDX[M]. In Proceedings of the FISITA 2012 World Automotive Congress. Berlin, Heidelberg: Springer, 2013.Google Scholar
  18. 18.
    J. Zhang, P. Yu, B. Zhang et al, Improved method of AUTOSAR in-vehicle network management. Journal of Electronic Measurement & Instrument, 2013.Google Scholar
  19. 19.
    J. R. Pimentel, An incremental approach to task and message scheduling for AUTOSAR based distributed automotive applications. In International Workshop on Software Engineering for Automotive Systems, 2007. ICSE Workshops Seas. IEEE, page 1-1, 2007.Google Scholar
  20. 20.
    W. C. Lu, P. Y. Lu, C. Long, et al., The design and simulation of vehicle electronic control network based on CAN/LIN bus, Advanced Materials Research, Vol. 403–408, pp. 3044–3048, 2012.Google Scholar
  21. 21.
    Mariusz A. Fecko, Timing and controllability issues in conformance testing of communications protocols. Ph.D thesis, University of Delaware, 1999.Google Scholar
  22. 22.
    Julien Provost, Jean-Marc Roussel, Jean-Marc Faure, Generation of single input change test sequences for conformance test of programmable logic controllers. IEEE Transactions on Industrial Informatics, Vol. 10, No. (3), pp. 1696–1704, 2014-08.Google Scholar
  23. 23.
    M. Krichen and S. Tripakis, Black-box conformance testing for real-time systems, Lecture Notes in Computer Science, Vol. 34, No. 3, pp. 109–126, 2004.CrossRefMATHGoogle Scholar
  24. 24.
    L. Cristaldi, A. Ferrero and V. Piuri, Programmable instruments, virtual instruments, and distributed measurement systems: what is really useful, innovative and technically sound?, IEEE Instrumentation & Measurement Magazine, Vol. 2, No. 3, pp. 20–27, 1999.CrossRefGoogle Scholar
  25. 25.
    Y. Q. Li, Y. Li and Z. X. Wang, Design and realization of passenger vehicle body CAN/LIN network based on AUTOSAR, Applied Mechanics & Materials, Vol. 40–41, pp. 3–7, 2011.CrossRefGoogle Scholar
  26. 26.
    Xiwen Guo. Comminucation and application of the ECU referenced to AUTOSAR standards. MA thesis, Zhe Jiang University, 2008.Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.School of Automotive StudyTongji UniversityShanghaiChina
  2. 2.New Energy Automotive Engineering CenterTongji UniversityShanghaiChina

Personalised recommendations