Advertisement

Critical Parameters and Critical-Region (\(p,\rho ,T)\) Data of trans-1,1,1,3-Tetrafluorobut-2-ene [HFO-1354mzy(E)]

  • Takeru KimuraEmail author
  • Yohei Kayukawa
  • Hiroyuki Miyamoto
  • Kiyoshi Saito
Article

Abstract

This study presents the experimental measurement of the \(p\rho T\) properties and critical parameters of a low GWP type refrigerant, trans-1,1,1,3-Tetrafluorobut-2-ene (HFO-1354mzy(E)). The sample purity of the substance was 99 area %. \(p \rho T\) property measurements and visual observations of the meniscus of HFO-1354mzy(E) were carried out using a metal-bellows volumometer with an optical cell. The critical temperature was determined by observation of the critical opalescence. The critical pressure and critical density were determined as the inflection point of the isothermal \(p \rho T\) property data at the critical temperature. For more precise clarification of the thermodynamic surface in the vicinity of the critical point, additional \(p \rho T\) property measurements were carried out on three isotherms in the supercritical region. The expanded uncertainties (\(k = 2\)) in the temperature, pressure, and density measurements were estimated to be less than 3 mK, 1.2 kPa, and 0.32 \(\hbox {kg} \cdot \hbox {m}^{-3}\), respectively. The expanded uncertainties of the critical parameters were estimated to be less than 13 mK, 1.4 kPa, and 2.3 \(\hbox {kg} \cdot \hbox {m}^{-3}\), respectively. These values are the first reported for HFO-1354mzy(E) and are necessary for the development of its equation of state in the near future.

Keywords

Critical opalescence Critical parameter HFO-1354mzy(E) \(p \rho T\) property measurement 

Nomenclature

a

Coefficient of the BWR type equation of the isotherm at the critical temperature, −

p

Pressure, MPa

R

Gas constant, \(\hbox {J} \cdot \hbox {K}^{-1} \cdot \hbox {mol}^{-1}\)

T

Temperature, K

\(\rho \)

Density, \(\hbox {kg} \cdot \hbox {m}^{-3}\)

Subscripts

b

Normal boiling point

c

Critical point

est

Estimation

i

The number of the term

T

Temperature

\(\rho \)

Density

Notes

Acknowledgements

The present research was partly supported by the Thermal Management Materials and Technology Research Association (TherMAT) program, New Energy and Industrial Technology Development Organization (NEDO), and Waseda Research Institute for Science and Engineering, Japan.

References

  1. 1.
    Material Safety Data Sheet, 1300-3-46—(E)-1,1,1,3-Tetrafluoro-2-Butene (SynQuest Laboratories, Inc., Alachua, 2015)Google Scholar
  2. 2.
    E.W. Lemmon, M.L. Huber, M.O. McLinden, Reference fluid thermodynamic and transport properties (REFPROP), NIST Standard Reference Database 23, Version 9.1 (2013)Google Scholar
  3. 3.
    M. Sato, G. Masui, M. Uematsu, J. Chem. Thermodyn. 37, 931–934 (2005)CrossRefGoogle Scholar
  4. 4.
    G. Masui, Y. Honda, M. Uematsu, J. Chem. Thermodyn. 38, 1711–1716 (2006)CrossRefGoogle Scholar
  5. 5.
    Y. Honda, T. Sato, M. Uematsu, J. Chem. Thermodyn. 40, 208–211 (2008)CrossRefGoogle Scholar
  6. 6.
    A. Sakabe, D. Arai, H. Miyamoto, M. Uematsu, J. Chem. Thermodyn. 40, 1527–1530 (2008)CrossRefGoogle Scholar
  7. 7.
    W. Wagner, A. Pruss, J. Phys. Chem. Ref. Data 31, 387–535 (2002)ADSCrossRefGoogle Scholar
  8. 8.
    K.G. Jocack, R.C. Teid, Chem. Eng. Comm. 57, 233–243 (1987)CrossRefGoogle Scholar
  9. 9.
    M. Benedict, G.B. Webb, L.C. Rubin, J. Chem. Phys. 8, 334–345 (1940)ADSCrossRefGoogle Scholar
  10. 10.
    L. Constantinou, R. Gani, AIChE J. Thermodyn. 40, 1697–1710 (1994)CrossRefGoogle Scholar
  11. 11.
    J. Marrero, E. Pardillo, AIChE J. Thermodyn. 45, 615–621 (1999)CrossRefGoogle Scholar
  12. 12.
    J.A. Beattie, D.G. Edwards, M. Stanley Jr., J. Chem. Phys. 17, 576 (1949)ADSCrossRefGoogle Scholar
  13. 13.
    J.F. Connolly, J. Phys. Chem. 66, 1082–1086 (1962)CrossRefGoogle Scholar
  14. 14.
    R. D. Goodwin, W. M. Haynes, NBS Tech. Note 1052, Boulder, (1982)Google Scholar
  15. 15.
    J.M. Levelt Sengers, H.B. Kamgar-Parsi, J.V. Sengeres, J. Chem. Eng. Data 28, 354 (1983)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media New York 2017

Authors and Affiliations

  1. 1.Department of Applied Mechanics and Aerospace EngineeringWaseda UniversityShinjuku-kuJapan
  2. 2.Fluid Property Standards Group, Research Institute for Engineering Measurement, National Metrology Institute of JapanNational Institute of Advanced Industrial Science and TechnologyTsukubaJapan
  3. 3.Department of Mechanical Systems EngineeringToyama Prefectural UniversityImizuJapan

Personalised recommendations