Advertisement

Glass and Ceramics

, Volume 76, Issue 7–8, pp 281–285 | Cite as

Calculation of Heat Losses from the Outer Surface of a Furnace Enclosure

  • S. K. PopovEmail author
  • A. V. Korovyakovskii
  • É. A. Serikov
EQUIPMENT
  • 1 Downloads

Relations obtained from an analysis of published data and as a result of mathematical modeling of a glass furnace are presented for calculating the heat flux density into the environment from the outer surfaces of the enclosure of an industrial furnace — sidewalls, roof, and hearth. On the basis of a comparative analysis of these relations for a glass furnace recommendations are formulated for selecting and using relations for calculating the coefficients of heat emission from the outer walls of the enclosure for the purpose of making a better determination of the heat balance of a furnace.

Key words

industrial furnaces heat losses into the environment heat-transfer coefficient in the presence of free convection heat balance of a furnace mathematical model of a glass furnace 

References

  1. 1.
    B. I. Kitaev, B. F. Zobnin, V. F. Ratnikov, et al., Heat-Engineering Calculations of Metallurgical Furnaces [in Russian], Metallurgiya, Moscow (1970).Google Scholar
  2. 2.
    S. K. Popov and V. A. Ippolitov, Solving the Problems of High-Temperature Heat Technology in the Mathcad Environment [in Russian], Izdat. Dom MEI, Moscow (2009).Google Scholar
  3. 3.
    V. P. Isachenko, V. A. Osipova, A. S. Sukomel, Heat Transfer, Energoizdat, Moscow (1981).Google Scholar
  4. 4.
    B. S. Petukhov and V. K. Shikov (eds.), Handbook of Heat-Exchangers [in Russian], Énergoatomizdat, Moscow (1987), Vol. 1.Google Scholar
  5. 5.
    F. F. Tsvetkov, R. V. Kerimov, and V. I. Velichko, Problem Book of Heat and Mass Transfer [in Russian], Izdat. Dom MEI, Moscow (2010).Google Scholar
  6. 6.
    Heat and Mass Transfer: Fundamentals and Applications, McGraw-Hill Education (2015).Google Scholar
  7. 7.
    F. Creit and W. Black, Fundamentals of Heat Transfer [Russian translation], Mir, Moscow (1983).Google Scholar
  8. 8.
    V. S. Glazov, N. V. Khomchenko, and A. Yu. Maskinskaya, Introduction to the PHOENICS Software Package [in Russian], Izd-vo MEI, Moscow (2017).Google Scholar
  9. 9.
    V. S. Glazov, N. V. Khomchenko, and A. A. Arbatskii, Numerical Modeling in PHOENICS and Mathcad [in Russian], Izd-vo MEI, Moscow (2017).Google Scholar
  10. 10.
    R. Beerkens and I. van der Schaaf, Advanced Heating Techniques for Glass Melting, Technische Universiteit Eindhoven, Eindhoven, March 5, 2002; URL: https:ru.scribd.comdocument120074994Advanced-heating-techniques-for-glassmelting.Google Scholar
  11. 11.
    R. Beerkens and H. Muysendberg, “Comparative study onenergysaving technologies for glass furnaces,” Glastech Ber., 65(8), 216 – 224 (1992); URL: https:pure.tue.nlwsfiles 2467163621507.pdf.Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • S. K. Popov
    • 1
    Email author
  • A. V. Korovyakovskii
    • 1
  • É. A. Serikov
    • 1
    • 2
  1. 1.National Research University “Moscow Power Engineering Institute,”MoscowRussia
  2. 2.Alamaty University of Power Engineering and TelecommunicationsAlmatyKazakhstan

Personalised recommendations