Glass and Ceramics

, Volume 74, Issue 11–12, pp 393–398 | Cite as

Influence of the Composition and Properties of Molding Bodies on the Characteristics of Corundum Block Carriers

  • V. Yu. KruglyakovEmail author
  • E. F. Sutormina
  • N. A. Kulikovskaya
  • N. A. Rudina
  • L. A. Isupova

Extrusion molding, varying the particle size and the conditions for obtaining corundum, was used to obtain ceramic block carriers. The structural and mechanical properties of the molding bodies were investigated, and the textural and strength characteristics of the blocks after calcination were determined. It was shown that the use of corundum powder obtained by mixing particles of different size results in the production of molding bodies of the first or fourth structural-mechanical type and makes it possible to produce ceramic block carrier with channel density about 200 pieces/inch2, mechanical strength at least 4.3 MPa, and high resistance to thermal cycling.

Key words

corundum block carrier extrusion molding structural and mechanical properties 


  1. 1.
    L. A. Isupova, E. F. Sutormina, N. A. Kulikovskaya, et al., “Honeycomb supported perovskite catalysts for ammonia oxidation processes,” Catalysis Today, 105, 429 – 435 (2005).CrossRefGoogle Scholar
  2. 2.
    Jürgen Neuman, The Catalyst and a Method of Decomposition of Dinitrogen Monoxide and a Method and Apparatus for Producing Nitric Acid, RF Patent 2397810. IPC-8, B01J23_10 [in Russian], published August 27, 2010.Google Scholar
  3. 3.
    Yu. V. Alekcandrova, E. A. Vlasov, N. V. Mal’tseva, et al., “Block articles with honeycomb structure made from of ceramic oxide, Pt. 1,” Ogneup. Tekh. Keram., No. 7 – 8, 62 – 66 (2010).Google Scholar
  4. 4.
    Z. R. Ismagilov, M. N. Shepeleva, R. A. Skrabina, and V. B. Fenelonov, “Interrelation between structural and mechanical characteristics of spherical alumina granules and the initial hydroxide properties,” Appl. Catal., 69, 65 – 73 (1991).CrossRefGoogle Scholar
  5. 5.
    A. V. Zhensa, A. A. Polunin, E. M. Kol’tsova, et al., “Development of an information system for extrusion molding of catalytic pastes,” Khim. Prom. Segodnya, No. 9, 4 – 9 (2003).Google Scholar
  6. 6.
    I. A. Petropavlovskii, V. V. Kostyuchenko, V. A. Filipin, et al., “Characteristics of extrusion technology and application of aluminum-oxide catalysts with shaped grains,” Khim. Prom., No. 10, 19 – 23 (1997).Google Scholar
  7. 7.
    V. Yu. Kruglyakov, L. A. Isupova, A. V. Glazyrin, et al., “Investigation of the properties of molding bodies based on aluminum hydroxides for extrusion molding,” Kataliz v Prom-sti, No. 1, 6 – 12 (2016).CrossRefGoogle Scholar
  8. 8.
    S. P. Nichiporenko, Physicochemical and Chemical Mechanics of Disperse Structures in Construction Ceramics Technology [in Russian], Naukova Dumka, Kiev (1968).Google Scholar
  9. 9.
    V. Yu. Kruglyakov, N. A. Kulikovskaya, and L. A. Isupova, “Rheological properties catalytic pastes of the block catalyst IK-42-1 as a function of the preparation conditions,” Kataliz v Prom-sti, No. 5, 41 – 49 (2008).Google Scholar
  10. 10.
    V. Yu. Prokof’ev, P. B. Razgovorov, and A. P. Il’in, Fundamentals of the Physicochemical Mechanics Extruded Catalysts and Sorbents [in Russian], Krasand, Moscow (2013).Google Scholar
  11. 11.
    A. P. Il’in and V. Yu. Prokof’ev Physicochemical Mechanics in the Technology of Catalysts And Sorbents [in Russian], Ivanovo State Chemical Technological Institute, Ivanovo (2004).Google Scholar
  12. 12.
    Z. R. Ismagilov, R. A. Shkrabina, and N. A. Koryabkina, Aluminum Oxide Carriers: Production, Properties, and Applications in Catalytic Processes in Environmental Protection [in Russian], SO RAN GPNTB; Inst. Kataliza im. G. K. Boreskova, Novosibirsk (1998) (Ekologiya, No. 50).Google Scholar
  13. 13.
    J. J. Benbow and J. Bridgwater, “On the prediction of extrudate pore structure from particle size,” Chem. Eng. Sci., 42(4), 753 – 766 (1987).CrossRefGoogle Scholar
  14. 14.
    P. A. Rebinder, Physicochemical Mechanics of Disperse Structures [in Russian], Nauka, Moscow (1966).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • V. Yu. Kruglyakov
    • 1
    Email author
  • E. F. Sutormina
    • 1
  • N. A. Kulikovskaya
    • 1
  • N. A. Rudina
    • 1
  • L. A. Isupova
    • 1
  1. 1.G. K. Boreskov Institute of Catalysis, Siberian Branch of the Russian Academy of SciencesNovosibirskRussia

Personalised recommendations