Advertisement

Reliability Assessment of Bearing Capacity of Cement–Iron Ore Tailing Blend Black Cotton Soil for Strip Foundations

  • Paul Yohanna
  • Johnson R. Oluremi
  • Adrian O. Eberemu
  • Kolawole J. Osinubi
  • John E. Sani
Original Paper
  • 28 Downloads

Abstract

A reliability estimate of bearing capacity values of cement–iron ore tailing treated black cotton soil was evaluated using a predictive model developed from laboratory results for specimens compacted at British Standard light, West African standard and British Standard heavy energy levels. Laboratory based geotechnical properties of the treated black cotton soil were incorporated into FORTRAN-based first-order reliability program to determine the reliability index values for the following parameters: cement content, C, Iron ore tailing content, IOT, cohesion, CO, friction angle, FA, percentage fine, PF, plasticity index, PI and unit weight, UW. Although cohesion, friction angle, plasticity index and unit weight were greatly influenced by the coefficient of variation, cement content C, IOT content IOT and percentage fine PF did not significantly affect the reliability index values. F-distribution test at 95% level of significance shows that compactive effort had significant effect on the outcome of the reliability index values. However, since reliability index (β) value of 1.0, which is considered adequate for serviceability limit state design, was not met, none of the compactive efforts could be used to model the behaviour of bearing capacity of cement–IOT treated black cotton soil. Hence, a more potent admixture should be used for improving the bearing capacity of strip foundation.

Keywords

Black cotton soil Iron ore tailing Cement Shear strength parameters Bearing capacity Reliability analysis and indices 

References

  1. Abdel Massih DY, Soubra A, Low BK (2008) Reliability-based analysis and design of strip foundations against bearing capacity failure. J Geotech Geoenviron Eng 134(7):917–928CrossRefGoogle Scholar
  2. Afolayan JO, Abubakar I (2003) Reliability analysis of reinforced concrete one-way slabs: the ultimate conditions. Niger J Eng 11(2):28–31Google Scholar
  3. Afolayan JO, Nwaiwu CMO (2005) Reliability-based assessment of compacted lateritic soil liners. Comput Geotech 32(7):505–519CrossRefGoogle Scholar
  4. ASCE (2005) Report card for America’s infrastructure. Available at http://www.asce.org/report card/2005/index.cfm. Accessed 27 July 2005
  5. Baecher GB, Christian JT (2008) Spatial variability and geotechnical reliability. In: Phoon KK (ed) Reliability-based design in geotechnical engineering. Taylor & Francis, Philadelphia, pp 76–133Google Scholar
  6. Benson CH (1993) Probability distributions for hydraulic conductivity of compacted soil liners. J Geotech Eng 119(3):471–486CrossRefGoogle Scholar
  7. Benson CH, Daniel DE (1994) Minimum thickness of compacted soil liner: 1 stochastic models. J Geotech Eng 120(1):129–152CrossRefGoogle Scholar
  8. Benson CH, Zhai H, Wang X (1994) Estimating hydraulic conductivity of compacted clay liners. J Geotech Eng 120(2):366–387CrossRefGoogle Scholar
  9. Bogardi I, Kelly WE, Bardossy A (1989) Reliability model for soil liners; initial design. J Geotech Geoenviron Eng 115(5):658–669CrossRefGoogle Scholar
  10. Charles JA (2002) Ground improvement: the interaction of engineering science and experience-based technology. Geotechnique 52(7):527–532CrossRefGoogle Scholar
  11. Dey A, Kudmetha KK (2013). Bearing capacity of single pile in sand: reliability analysis using Monte-Carlo simulation. In: Proceedings of Indian geotechnical conference, 22–24 Dec 2013, Roorkee, IndiaGoogle Scholar
  12. Duncan MJ (2000) Factors of safety and reliability in geotechnical engineering. J Geotech Geoenviron Eng 126:307–316CrossRefGoogle Scholar
  13. Eberemu OA (2008) Evaluation of compacted bagasse ash treated laterite soil as hydraulic barriers in waste containment systems. In: Unpublished Ph.D dissertation submitted to the Department of Civil Engineering, Ahmadu Bello University, ZariaGoogle Scholar
  14. Eberemu AO, Afolayan JO, Abubakar I, Osinubi KJ (2014) Reliability evaluation of compacted lateritic soil treated with bagasse ash as material for waste landfill barrier. In: Proceedings of the geo-congress 2014 on geo-characterization and modeling for sustainability, American Society of Civil Engineers ASCEGoogle Scholar
  15. Fenton GA (1997) Probabilistic methods in geotechnical engineering. In: Workshop presented at ASCE GeoLogan’97 conference, Logan, Utah, ASCE Geotechnical Safety and Reliability CommitteeGoogle Scholar
  16. Fenton GA, Griffiths DV (2005) Three-dimensional probabilistic foundation settlement. J Geotech Geoenviron Eng 131(2):232–239CrossRefGoogle Scholar
  17. Ghose MK, Sen PK (2001) Characteristics of iron ore tailing slime in india and its test for required pond size. J Environ Monit Assess 68(1):51–61CrossRefGoogle Scholar
  18. Gourley CS, Newill D, Schreiner HD (1993) Expansive soils: TRL’s research strategy. In: Proceedings of 1st international symposium on engineering characteristics of arid soilsGoogle Scholar
  19. Griffiths DV, Fenton GA, Manoharan N (2002) Bearing capacity of rough rigid strip footing on cohesive soil: probabilistic study. J Geotech Geoenviron Eng 128(9):743–755CrossRefGoogle Scholar
  20. Gui S, Zhang R, Turner JP, Zue X (2000) Probabilistic slope stability analysis with stochastic soil hydraulic conductivity. J Geotech Geoenviron Eng 126(1):1–9CrossRefGoogle Scholar
  21. Harrop-Willians K (1985) Clay liner permeability: evaluation and variation. J Geotech Eng 111(10):1211–1225CrossRefGoogle Scholar
  22. Ijimdiya ST (2010) Evaluation of compacted bagasse ash treated black cotton soil as hydraulic barriers in waste containment systems. In: Unpublished Ph.D dissertation submitted to the Department of Civil Engineering, Ahmadu Bello University, ZariaGoogle Scholar
  23. Kawa M (2015) Reliability analysis of bearing capacity of square footing on soil with strength anisotropy due to layered microstructure. Stud Geotech Mech 37(4):1.  https://doi.org/10.1515/sgem-2015-0041 Google Scholar
  24. Kotegoda M, Rosso R (1997) Statistics, probability, and reliability for civil and environmental engineers. McGraw-Hill, New YorkGoogle Scholar
  25. National Research Board (2006) Geological and geotechnical engineering in the New Millennium: opportunities for research and technological innovation. The National Academies Press, Washington, D.C. www.nap.edu
  26. Neville AM (2000). Properties of concrete, 4th ed. (low-price ed.). Pearson Education Asia Publication, England, Produced by Longman MalaysiaGoogle Scholar
  27. NKB—Report No. 36 (1978) Recommendation for loading and safety regulations for structural design, Nordic Committee on Building RegulationGoogle Scholar
  28. Nwaiwu CMO, Afolayan JO, Osinubi KJ (2009) Reliability estimates of field hydraulic conductivity of compacted lateritic soils continental. J Eng Sci 4:36–47Google Scholar
  29. Ola SA (1983) The geotechnical properties of black cotton soils of north eastern Nigeria. In: Ola SA (ed) Tropical soils of Nigeria in engineering practice. Balkema, Rotterdam, pp 160–178Google Scholar
  30. Oluremi JR, Adedokun SI, Osuolale OM (2012) Stabilization of poor lateritic soils with coconut husk ash. Int J Eng Res Technol 1(8):1–9Google Scholar
  31. Oluremi JR, Ijimdiya ST, Eberemu AO, Osinubi KJ (2018) Reliability evaluation of hydraulic conductivity characteristics of waste wood ash treated lateritic soil. Geotech Geol Eng.  https://doi.org/10.1007/s10706-018-0625-5 Google Scholar
  32. Oriola FOP, Moses G, Afolayan JO (2012) Reliability estimates of field hydraulic conductivity of compacted bagasse ash treated foundry sand. J Environ Earth Sci 2(6):1–13Google Scholar
  33. Osinubi KJ (2000) Stabilization of tropical black clays with cement and pulverised coal bottom ash admixture. Am Soc Civil Eng Geotech Spec Publ 99:298–302Google Scholar
  34. Osinubi KJ, Eberemu AO, Yohanna P (2015) Cement modification of tropical black clay using iron ore tailing as admixture. J Transp Geotech 5:35–49.  https://doi.org/10.1016/j.trgeo.2015.10.001 CrossRefGoogle Scholar
  35. Popescu R, Deodatis G, Nobahar A (2005) Effect of random heterogeneity of soil properties on bearing capacity. Probab Eng Mech 20:324–341CrossRefGoogle Scholar
  36. Przewlocki J (2005) A stochastic approach to the problem of bearing capacity by the method of characteristics. Comput Geotech 32:370–376CrossRefGoogle Scholar
  37. Vessia G, Cherubini C, Pieczyńska J, Puła W (2009) Application of random finite element method to bearing capacity design of strip footing. J GeoEng 4(3):103–112Google Scholar
  38. Yisa GL, Sani JE (2014) Reliability estimate of strength characteristic of iron ore tailing stabilized lateritic soil for road pavement sub-base materials. Electron J Geotech Eng 19:4177–4192Google Scholar
  39. Yohanna P (2015) The use of iron-ore tailing as admixture in cement modification of black cotton soil. In: Unpublished M.Sc thesis submitted to the Department of Civil Engineering, Ahmadu Bello University, ZariaGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2018

Authors and Affiliations

  • Paul Yohanna
    • 1
  • Johnson R. Oluremi
    • 1
    • 2
  • Adrian O. Eberemu
    • 1
  • Kolawole J. Osinubi
    • 1
  • John E. Sani
    • 3
  1. 1.Department of Civil EngineeringAhmadu Bello UniversityZariaNigeria
  2. 2.Department of Civil EngineeringLadoke Akintola University of TechnologyOgbomosoNigeria
  3. 3.Department of Civil EngineeringNigerian Defence AcademyKadunaNigeria

Personalised recommendations