Multiscale crystal-plasticity phase field and extended finite element methods for fatigue crack initiation and propagation modeling
- 338 Downloads
This paper presents a physics-based prediction of crack initiation at the microstructure level using the phase field (PF) model without finite element discretization, coupled with an efficient and accurate modeling of crack propagation at macro-scale based on extended finite element method (XFEM). Although the macro-scale model assumes linear elastic material behavior, at micro-scale the behavior of plastically deforming heterogeneous polycrystals is taken into account by coupling the PF model and a crystal plasticity model in the fast Fourier transform computational framework. A sequential coupling has been established for the multiscale modeling where the macro-scale finite element (FE) model determines the hot spots at each cyclic loading increment and passes the associated stress/strain values to the unit-cell phase-field model for accurate physics-based microstructure characterization and prediction of plasticity induced crack initiation. The PF model predicts the number of cycles for the crack initiation and the phenomenological crack growth models are employed to propagate the initiated crack by the appropriate length to be inserted in the FE mesh. Finally, the XFEM solution module is activated to perform mesh independent crack propagation from its initial crack size to the final size for the total life prediction. The effectiveness of the proposed multiscale method is demonstrated through numerical examples.
KeywordsPhase field model Crystal plasticity Fast Fourier transform Extended finite element method Multiscale modeling Fatigue crack initiation and propagation
The authors gratefully acknowledge the support from NAVAIR under contract N68335-16-C-0197. In addition, Dr. K. Momeni would like to acknowledge the funding from LEQSF(2015-18)-LaSPACE and LONI supercomputing resources. The authors are also grateful to Prof. David McDowell, Prof. Mark Horstemeyer, Dr. Yibin Anna Xue, and Dr. Justin Hughes for helpful comments on the short crack growth model. The EBSD data was also provided in courtesy by Dr. Stefan Zaefferer and Hasso Weiland.
- Chen L, Chen J, Lebensohn R, Jia Y, Heo T, Bhattacharyya S, Chang K, Mathaudhu S, Liu ZK, Chen LQ (2015) An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals. Comput Methods Appl Mech Eng 285:829–848CrossRefGoogle Scholar
- DREAM.3D software (n.d.) http://dream3d.bluequartz.net/. Accessed 15 April 2018
- Fine M, Bhat S (2007) A model of fatigue crack nucleation in single crystal iron and copper. Mater Sci Eng A 468:468–470Google Scholar
- Fries T, Belytschko T (2010) The extended/generalized finite element method: an overview of the method and its applications. Int J Numer Methods Eng 84:253–304Google Scholar
- Provatas N, Elder K (2011) Phase-field methods in materials science and engineering. Wiley, HobokenGoogle Scholar
- XFA3D software (n.d.) http://gem-innovation.com/project/xfa3d. Accessed 15 April 2018