Para\(^2\): parameterized path reduction, acceleration, and SMT for reachability in thresholdguarded distributed algorithms
 470 Downloads
 1 Citations
Abstract
Automatic verification of thresholdbased faulttolerant distributed algorithms (FTDA) is challenging: FTDAs have multiple parameters that are restricted by arithmetic conditions, the number of processes and faults is parameterized, and the algorithm code is parameterized due to conditions counting the number of received messages. Recently, we introduced a technique that first applies data and counter abstraction and then runs bounded model checking (BMC). Given an FTDA, our technique computes an upper bound on the diameter of the system. This makes BMC complete for reachability properties: it always finds a counterexample, if there is an actual error. To verify stateoftheart FTDAs, further improvement is needed. In contrast to encoding bounded executions of a counter system over an abstract finite domain in SAT, in this paper, we encode bounded executions over integer counters in SMT. In addition, we introduce a new form of reduction that exploits acceleration and the structure of the FTDAs. This aggressively prunes the execution space to be explored by the solver. In this way, we verified safety of seven FTDAs that were out of reach before.
Keywords
Parameterized verification Bounded model checking Completeness Partial orders in distributed systems Reduction Faulttolerant distributed algorithms Byzantine faults1 Introduction
Replication is a classic approach to make computing systems more reliable. In order to avoid a single point of failure, one uses multiple processes in a distributed system. Then, if some of these processes fail (e.g., by crashing or deviating from their expected behavior) the distributed system as a whole should stay operational. For this purpose one uses faulttolerant distributed algorithms (FTDAs). These algorithms have been extensively studied in distributed computing theory [1, 50], and found application in safety critical systems (automotive or aeronautic industry). With the recent advent of data centers and cloud computing we observe growing interest in faulttolerant distributed algorithms, and their correctness, also for more mainstream computer science applications [19, 20, 31, 47, 52, 54, 60].
We consider automatic verification techniques specifically for thresholdbased faulttolerant distributed algorithms. In these algorithms, processes collect messages from their peers, and check whether the number of received messages reaches a threshold, e.g., a threshold may ensure that acknowledgments from a majority of processes have been received. Waiting for majorities, or more generally waiting for quorums, is a key pattern of many faulttolerant algorithms, e.g., consensus, replicated state machine, and atomic commit. In [34] we introduced an efficient encoding of these algorithms, which we used in [33] for abstractionbased parameterized model checking of safety and liveness of several case study algorithms, which are parameterized in the number of processes n and the fraction of faults t, e.g., \(n>3t\). In [41] we were able to verify reachability properties of more involved algorithms by applying bounded model checking. We showed how to make bounded model checking complete in the parameterized case. In particular, we considered counter systems where we record for each local state, how many processes are in this state. We have one counter per local state \(\ell \), denoted by \(\kappa [\ell ]\). A process step from local state \(\ell \) to local state \(\ell '\) is modeled by decrementing \(\kappa [\ell ]\) and incrementing \(\kappa [\ell ']\). When \(\delta \) processes perform the same step one after the other, we allow the processes to do the accelerated step that instantaneously changes the two affected counters by \(\delta \). The number \(\delta \) is called acceleration factor, which can vary in a single run.
As we focus on thresholdbased FTDAs, we consider counter systems defined by threshold automata. Here, transitions are guarded by threshold guards that compare a shared integer variable to a linear combination of parameters, e.g., \(x\ge nt\) or \(x<t\), where x is a shared variable and n and t are parameters.
 1.
Apply a parametric data abstraction to the process code to get a finite state process description, and construct the threshold automaton (TA) [33, 36].
 2.
Compute the diameter bound, based on the control flow of the TA.
 3.
 4.
Perform SATbased bounded model checking [6, 16] up to the diameter bound, to check whether bad states are reached in the counter abstraction.
 5.
Figure 1 gives on top a diagram [40] that shows the technique based on counter abstraction. While this allowed us to automatically verify several FTDAs not verified before, there remained two bottlenecks for scalability to larger and more complex protocols: First, counter abstraction can lead to spurious counterexamples. As counters range over a finite abstract domain, the semantics of abstract increment and decrements on the counters introduce nondeterminism. For instance, the value of a counter can remain unchanged after applying an increment. Intuitively, processes or messages can be “added” or “lost”, which results in that, e.g., in the abstract model the number of messages sent is smaller than the number of processes that have sent a message, which obviously is spurious behavior. Second, counter abstraction works well in practice only for processes with a few dozens of local states. It has been observed in [4] that counter abstraction does not scale to hundreds of local states. We had similar experience with counter abstraction in our experiments in [41]. We conjecture that this is partly due to the many different interleavings, which result in a large search space.
 1.
To eliminate one of the two sources of spurious counterexamples, namely, the nondeterminism added by abstract counters, we do bounded model checking using SMT solvers with linear integer arithmetic on the accelerated system, instead of SATbased bounded model checking on the counter abstraction.
 2.
We reduce the search space dramatically: we introduce the notion of an execution schema that is defined as a sequence of local rules of the TA. By assigning to each rule of a schema an acceleration factor (possibly 0, which models that no process executes the rule), one obtains a run of the counter system. Hence, due to parameterization, each schema represents infinitely many runs. We show how to construct a set of schemas whose set of reachable states coincides with the set of reachable states of the accelerated counter system.
Our experiments show that SMT solvers and schemas outperform SAT solvers and counter abstraction in parameterized verification of thresholdbased FTDAs. We verified safety of FTDAs [10, 18, 29, 51, 56, 57] that have not been automatically verified before. In addition we achieved dramatic speedup and reduced memory footprint for FTDAs [9, 12, 58] which previously were verified in [41].
In this article we focus on parameterized reachability properties. Recently, we extended this approach to safety and liveness, for which we used the reachability technique of this article as a black box [37].
2 Our approach at a glance
For modeling thresholdbased FTDAs, we use threshold automata that were introduced in [38, 41] and are discussed in more detail in [40]. We use Fig. 2 to describe our contributions in this section. The figure presents a threshold automaton TA over two shared variables x and y and parameters n, t, and f, which is inspired by the distributed asynchronous broadcast protocol from [9]. There, \(n  f\) correct processes concurrently follow the control flow of TA, and f processes are Byzantine faulty. As is typical for FTDAs, the parameters must satisfy a resilience condition, e.g., \(n > 3t \wedge t \ge f \ge 0\), that is, less than a third of the processes are faulty. The circles depict the local states \(\ell _1, \dots , \ell _5\), two of them are the initial states \(\ell _1\) and \(\ell _2\). The edges depict the rules \(r_1, \dots , r_6\) labeled with guarded commands \(\varphi \mapsto \mathsf {act}\), where \(\varphi \) is one of the threshold guards “\(\varphi _1 :x \ge \lceil (n+t)/2 \rceil  f\)”, “\(\varphi _2 :y \ge (t + 1)  f\)”, and “\(\varphi _3 :y \ge (2t + 1)  f\)”, and an action \(\mathsf {act}\) increases the shared variables (x and y) by one, or zero (as in rule \(r_6\)).
We associate with every local state \(\ell _i\) a nonnegative counter \({\mathbf {\varvec{\kappa }}}[\ell _i]\) that represents the number of processes in \(\ell _i\). Together with the values of x, y, n, t, and f, the values of the counters constitute a configuration of the system. In the initial configuration there are \(nf\) processes in initial states, i.e., \({\mathbf {\varvec{\kappa }}}[\ell _1] + {\mathbf {\varvec{\kappa }}}[\ell _2] = n  f\), and the other counters and the shared variables x and y are zero.
The rules define the transitions of the counter system. For example, according to the rule \(r_2\), if in the current configuration the guard \(y \ge t+1f\) holds true and \({\mathbf {\varvec{\kappa }}}[\ell _1] \ge 5\), then five processes can instantaneously move out of the local state \(\ell _1\) to the local state \(\ell _3\), and increment x as prescribed by the action of \(r_2\) (since the evaluation of the guard \(y \ge t+1f\) cannot change from true to false). This results in increasing x and \({\mathbf {\varvec{\kappa }}}[\ell _3]\) by five, and decreasing the counter \({\mathbf {\varvec{\kappa }}}[\ell _1]\) by five. When, as in our example, rule \(r_2\) is conceptually executed by 5 processes, we denote this transition by \((r_2,5)\), where 5 is the acceleration factor. A sequence of transitions forms a schedule, e.g., \((r_1,2), (r_3,1), (r_1,1)\).
In this paper, we address a parameterized reachability problem, e.g., can at least one correct process reach the local state \(\ell _5\), when \(nf\) correct processes start in the local state \(\ell _1\)? Or, in terms of counter systems, is a configuration with \({\mathbf {\varvec{\kappa }}}[\ell _5] \ne 0\) reachable from an initial configuration with \({\mathbf {\varvec{\kappa }}}[\ell _1] = nf \wedge {\mathbf {\varvec{\kappa }}}[\ell _2] = 0\)? As discussed in [41], acceleration does not affect reachability, and precise treatment of the resilience condition and threshold guards is crucial for solving this problem.
2.1 Schemas
When applied to a configuration, a schedule generates a path, that is, an alternating sequence of configurations and transitions. As initially x and y are zero, threshold guards \(\varphi _1\), \(\varphi _2\), and \(\varphi _3\) evaluate to false. As rules may increase variables, these guards may eventually become true. In our example we do not consider guards like \(x<t+1\) that are initially true and become false, although we formally treat them in our technique. In fact, initially only \(r_1\) is unlocked. Because \(r_1\) increases x, it may unlock \(\varphi _1\). Thus \(r_4\) becomes unlocked. Rule \(r_4\) increases y and thus repeated application of \(r_4\) (by different processes) first unlocks \(\varphi _2\) and then \(\varphi _3\). We introduce a notion of a context that is the set of threshold guards that evaluate to true in a configuration. For our example we observe that each path goes through the following sequence of contexts \(\{\}\), \(\{\varphi _1\}\), \(\{\varphi _1, \varphi _2\}\), and \(\{\varphi _1, \varphi _2, \varphi _3\}\). In fact, the sequence of contexts in a path is always monotonic, as the shared variables can only be increased.
In this paper, we show that the schedules generated by a few schemas —one per each monotonic sequence of contexts —span the set of all reachable configurations. To this end, we apply reduction and acceleration to relate arbitrary schedules to their representatives, which are generated by schemas.
2.2 Reduction and acceleration
To show that this schedule is captured by the schema (2.1), we apply partial order arguments —that is, a mover analysis [48] —regarding distributed computations: As the guards \(\varphi _2\) and \(\varphi _3\) evaluate to true in \(\tau _4\), and \(r_5\) precedes \(r_6\) in the control flow of the TA, all transitions \((r_5,1)\) can be moved to the left in \(\tau _4\). Similarly, \((r_1,1)\) can be moved to the left in \(\tau _2\). The resulting schedule is applicable and leads to the same configuration as the original one. Further, we can accelerate the adjacent transitions with the same rule, e.g., the sequence \((r_5,1), (r_5,1)\) can be transformed into \((r_5,2)\). Thus, we transform subschedules \(\tau _i\) into \(\tau '_i\), and arrive at the schedule \(\tau '\) from Eq. (2.2), which we call the representative schedule of \(\tau \). As the representative schedule \(\tau '\) is generated from the schema in (2.1), we say that the schema captures schedule \(\tau \). (It also captures \(\tau '\).) Importantly for reachability checking, if \(\tau \) and \(\tau '\) are applied to the same configuration, they end in the same configuration. These arguments are formalized in Sects. 5, 6 and 7.
2.3 Encoding a schema in SMT
One of the key insights in this paper is that reachability checking via schemas can be encoded efficiently as SMT queries in linear integer arithmetic. In more detail, finite paths of counter systems can be expressed with inequalities over counters such as \({\mathbf {\varvec{\kappa }}}[\ell _2]\) and \({\mathbf {\varvec{\kappa }}}[\ell _3]\), shared variables such as x and y, parameters such as n, t, and f, and acceleration factors. Also, threshold guards and resilience conditions are expressions in linear integer arithmetic.
We give an example of reachability checking with SMT using the simple schema \(\{\}\ r_1, r_1 \, \{\varphi _1\}\) which is contained in the schema S in Eq. (2.1). To obtain a complete encoding for S, one can similarly encode the other simple schemas and combine them.
3 Parameterized counter systems
We recall the framework of [41] to the extent necessary, and extend it with the notion of a context in Sect. 3.2. A threshold automaton describes a process in a concurrent system, and is a tuple Open image in new window defined below.
The finite set \({\mathcal L}\) contains the local states, and \({\mathcal I}\subseteq {\mathcal L}\) is the set of initial states. The finite set \(\varGamma \) contains the shared variables that range over the natural numbers \({\mathbb N}_0\). The finite set \(\Pi \) is a set of parameter variables that range over \({\mathbb N}_0\), and the resilience condition \({\textit{RC}}\) is a formula over parameter variables in linear integer arithmetic, e.g., \(n>3t\). The set of admissible parameters is Open image in new window .
A key ingredient of threshold automata are threshold guards (or, just guards):
Definition 3.1
 (R)

\(x\ \ge \ a_0 + a_1 \cdot p_1 + \cdots + a_{{\Pi }} \cdot p_{\Pi }\), or
 (F)

\(x\ <\ a_0 + a_1 \cdot p_1 + \cdots + a_{{\Pi }} \cdot p_{\Pi }\),
A rule defines a conditional transition between local states that may update the shared variables. Formally, a rule is a tuple \(({ from }, { to }, \varphi ^{\mathrm {rise}}, \varphi ^{\mathrm {fall}}, \mathbf {u})\): the local states \({ from }\) and \({ to }\) are from \({\mathcal L}\). (Intuitively, they capture from which local state to which a process moves.) A rule is only executed if the conditions \(\varphi ^{\mathrm {rise}}\) and \(\varphi ^{\mathrm {fall}}\) evaluate to true. Condition \(\varphi ^{\mathrm {rise}}\) is a conjunction of guards from \(\varPhi ^{\mathrm {rise}}\), and \(\varphi ^{\mathrm {fall}}\) is a conjunction of guards from \(\varPhi ^{\mathrm {fall}}\) (cf. Definition 3.1). We denote the set of guards used in \(\varphi ^{\mathrm {rise}}\) by \(\mathsf {guard}(\varphi ^{\mathrm {rise}})\), and \(\mathsf {guard}(\varphi ^{\mathrm {fall}})\) is the set of guards used in \(\varphi ^{\mathrm {fall}}\).
Rules may increase shared variables using an update vector \(\mathbf {u}\in {\mathbb N}_0^{\varGamma }\) that is added to the vector of shared variables. As \(\mathbf {u}\in {\mathbb N}_0^{\varGamma }\), global variables can only be increased or left unchanged. As will be later formalized in Proposition 3.1, guards from \(\varPhi ^{\mathrm {rise}}\) can only change from false to true (rise), and guards from \(\varPhi ^{\mathrm {fall}}\) can change from true to false (fall). Finally, \({\mathcal R}\) is the finite set of rules. We use the dot notation to refer to components of rules, e.g., \(r.{ from }\) or \(r.\mathbf {u}\).
Example 3.1
In Fig. 2, the rule \(r_2:\varphi _2 \mapsto x{\texttt {++}}\) that describes a transition from \(\ell _1\) to \(\ell _3\), can formally be written as \((\ell _1, \ell _3, \varphi _2,\top , (1,0))\). Its intuitive meaning is as follows. If the guard \(\varphi _2: y \ge (t+1)f\) evaluates to true, a process can move from the local state \(\ell _1\) to the local state \(\ell _3\), and the global variable x is incremented, while y remains unchanged. We formalize the semantics as counter systems in Sect. 3.1.
Definition 3.2
Given a threshold automaton \(({\mathcal L}, {\mathcal I}, \varGamma , \Pi , {\mathcal R},{\textit{RC}})\), we define the precedence relation Open image in new window : for a pair of rules \(r_1, r_2 \in {\mathcal R}\), it holds that \(r_1 \prec _{{ P }}r_2\) if and only if \(r_1.{ to }= r_2.{ from }\). We denote by \(\prec ^+_{\scriptscriptstyle { P }}\) the transitive closure of \(\prec _{{ P }}\). Further, we say that \(r_1 \sim _{\scriptscriptstyle { P }}r_2\), if \(r_1 \prec ^+_{\scriptscriptstyle { P }}r_2 \, \wedge \, r_2 \prec ^+_{\scriptscriptstyle { P }}r_1\), or \(r_1 = r_2\).
Assumption 3.3
We limit ourselves to threshold automata relevant for FTDAs, i.e., those where \(r.\mathbf {u}= \mathbf {0}\) for all rules \(r\in {\mathcal R}\) that satisfy \(r \prec ^+_{\scriptscriptstyle { P }}r\). Such automata were called canonical in [41].
Remark 3.1
We use threshold automata to model faulttolerant distributed algorithms that count messages from distinct senders. These algorithms are based on an “idealistic” reliable communication assumption (no message loss); these assumptions are typically expected to be ensured by “lower level bookkeeping code”, e.g., communication protocols. As a result, the algorithms we consider here do not gain from sending the same message (that is, increasing a variable) inside a loop, so that we can focus on threshold automata that do not increase shared variables in loops.
Example 3.2
In the threshold automaton from Fig. 3 we have that \(r_2\prec _{{ P }}r_3\prec _{{ P }}r_4 \prec _{{ P }}r_5 \prec _{{ P }}r_6 \prec _{{ P }}r_8 \prec _{{ P }}r_2\). Thus, we have that \(r_2 \prec ^+_{\scriptscriptstyle { P }}r_2\). In our case this implies that \(r_2.\mathbf {u}= \mathbf {0}\) by definition. Similarly we can conclude that \(r_3.\mathbf {u}= r_4.\mathbf {u}= r_5.\mathbf {u}= r_6.\mathbf {u}= r_7.\mathbf {u}= r_8.\mathbf {u}= \mathbf {0}\).
Example 3.3
Consider Fig. 3. The threshold automaton has five looplets: \(c_1=\{r_1\}\), \(c_2=\{r_2, \dots , r_8\}\), \(c_3=\{r_9\}\), \(c_4=\{r_{10}\}\), and \(c_5=\{r_{11}\}\). From \(r_9 \prec _{{ P }}r_{10}\), it follows that Open image in new window , and from \(r_4\prec ^+_{\scriptscriptstyle { P }}r_{10}\), it follows that Open image in new window . We can pick two linear extensions of Open image in new window , denoted by Open image in new window and Open image in new window . We have Open image in new window , and Open image in new window . In this paper we always fix one linear extension.
Remark 3.2
It may seem natural to collapse such loops into singleton local states. In our case studies, e.g, [29], nontrivial loops are used to express nondeterministic choice due to failure detectors [12], as shown in Fig. 4. Importantly, some local states inside the loops appear in the specifications. Thus, one would have to use arguments from distributed computing to characterize when collapsing states is sound. In this paper, we present a technique that deals with the loops without need for additional modelling arguments.
3.1 Counter systems
We use a function \(N:\mathbf {P}_{RC}\rightarrow {\mathbb N}_0\) to capture the number of processes for each combination of parameters. As we use SMT, we assume that \(N\) can be expressed in linear integer arithmetic. For instance, if only correct processes are explictly modeled we typically have \(N(n,t,f) = nf\), and the respective SMT expression is \(n  f\). Given \(N\), a threshold automaton \(\textsf {TA}\), and admissible parameter values \(\mathbf {p}\in \mathbf {P}_{RC}\), we define a counter system as a transition system \((\varSigma ,I,R)\). It consists of the set of configurations \(\varSigma \), which contain evaluations of the counters and variables, the set of initial configurations \(I\), and the transition relation \(R\):
Configurations \(\varSigma \) and \(I\) A configuration \(\sigma =({\mathbf {\varvec{\kappa }}},\mathbf {g},\mathbf {p})\) consists of a vector of counter values \(\sigma .{\mathbf {\varvec{\kappa }}}\in {\mathbb N}_0^{{\mathcal L}}\) (for simplicity we use the convention that \({\mathcal L}= \{1, \ldots , {\mathcal L} \}\)) a vector of shared variable values \(\sigma .\mathbf {g}\in {\mathbb N}_0^{\varGamma }\), and a vector of parameter values \(\sigma .\mathbf {p}= \mathbf {p}\). The set \(\varSigma \) is the set of all configurations. The set of initial configurations \(I\) contains the configurations that satisfy \(\sigma .\mathbf {g}= \mathbf {0}\), \(\sum _{i \in {\mathcal I}} \sigma .{\mathbf {\varvec{\kappa }}}[i] = N(\mathbf {p})\), and \(\sum _{i \not \in {\mathcal I}} \sigma .{\mathbf {\varvec{\kappa }}}[i] = 0\). This means that in every initial configuration all global variables have zero values, and all \(N(\mathbf {p})\) modeled processes are located only in the initial local states.
Example 3.4
Consider the threshold automaton from Fig. 2 with the initial states \(\ell _1\) and \(\ell _2\). Let us consider a system of five processes, one of them being Byzantine faulty. Thus, \(n=5\), \(t=f=1\), and we explicitely model \(N(5,1,1)=nf=4\) correct processes. One of the initial configurations is \(\sigma =({\mathbf {\varvec{\kappa }}},\mathbf {g},\mathbf {p})\), where \(\sigma .{\mathbf {\varvec{\kappa }}}=(1,3,0,0,0)\), \(\sigma .\mathbf {g}=(0,0)\), and \(\sigma .\mathbf {p}= (5,1,1)\). In other words, there is one process in \(\ell _1\), three processes in \(\ell _2\), and global variables are initially \(x=y=0\). Note that \(\sum _{i\in {\mathcal I}} \sigma .{\mathbf {\varvec{\kappa }}}[i] = {\mathbf {\varvec{\kappa }}}[\ell _1] + {\mathbf {\varvec{\kappa }}}[\ell _2] = 1+3=4=N(5,1,1)\).
Transition relation \(R\) A transition is a pair \(t=({ rule },{ factor })\) of a rule of the \(\textsf {TA}\) and a nonnegative integer called the acceleration factor, or just factor for short. (As already discussed in Sect. 2.1, we will use the zero factors when generating schedules from schemas.) For a transition \(t=({ rule },{ factor })\) we refer by \(t.\mathbf {u}\) to \({ rule }.\mathbf {u}\), and by \(t.\varphi ^{\mathrm {fall}}\) to \({ rule }.\varphi ^{\mathrm {fall}}\), etc. We say a transition t is unlocked in configuration \(\sigma \) if \((\sigma .{\mathbf {\varvec{\kappa }}},\sigma .\mathbf {g}+ k\cdot t.\mathbf {u}, \sigma .\mathbf {p}) \models t.\varphi ^{\mathrm {rise}}\wedge t.\varphi ^{\mathrm {fall}}\), for \(k \in \{0, \ldots , t.{ factor } 1 \}\). Note that here we use a notation that a configuration satisfies a formula, which is considered true if and only if the formula becomes true when all free variables of the formulas are evaluated as in the configuration.

\(\sigma '.\mathbf {g}= \sigma .\mathbf {g}+ t.{ factor }\cdot t.\mathbf {u}\) and \(\sigma '.\mathbf {p}= \sigma .\mathbf {p}\)
 if \(t.{ from }\ne t.{ to }\) then

\(\sigma '.{\mathbf {\varvec{\kappa }}}[t.{ from }]=\sigma .{\mathbf {\varvec{\kappa }}}[t.{ from }]  t.{ factor }\),

\(\sigma '.{\mathbf {\varvec{\kappa }}}[t.{ to }]=\sigma .{\mathbf {\varvec{\kappa }}}[t.{ to }] + t.{ factor }\), and

\(\forall \ell \in {\mathcal L}{\setminus } \{t.{ from }, t.{ to }\}\) it holds that \(\sigma '.{\mathbf {\varvec{\kappa }}}[\ell ]=\sigma .{\mathbf {\varvec{\kappa }}}[\ell ]\)


if \(t.{ from }= t.{ to }\) then \(\sigma '.{\mathbf {\varvec{\kappa }}}= \sigma .{\mathbf {\varvec{\kappa }}}\)
Proposition 3.1
[41] For all configurations \(\sigma \), all rules r, and all transitions t applicable to \(\sigma \), the following holds:
1. If \(\sigma \models r.\varphi ^{\mathrm {rise}}\) then \(t(\sigma ) \models r.\varphi ^{\mathrm {rise}}\) 3. If \(\sigma \not \models r.\varphi ^{\mathrm {fall}}\) then \(t(\sigma ) \not \models r.\varphi ^{\mathrm {fall}}\)
2. If \(t(\sigma ) \not \models r.\varphi ^{\mathrm {rise}}\) then \(\sigma \not \models r.\varphi ^{\mathrm {rise}}\) 4. If \(t(\sigma ) \models r.\varphi ^{\mathrm {fall}}\) then \(\sigma \models r.\varphi ^{\mathrm {fall}}\)
Schedules and paths A schedule is a (finite) sequence of transitions. For a schedule \(\tau \) and an index \(i: 1 \le i \le \tau \), by \(\tau [i]\) we denote the ith transition of \(\tau \), and by \(\tau ^i\) we denote the prefix \(\tau [1], \ldots , \tau [i]\) of \(\tau \). A schedule \(\tau = t_1, \ldots , t_m\) is applicable to configuration \(\sigma _0\), if there is a sequence of configurations \(\sigma _1,\ldots , \sigma _m\) with \(\sigma _i = t_{i} (\sigma _{i1})\) for \(1 \le i \le m\). If there is a \(t_i.{ factor }>1\), then a schedule is accelerated.
By \(\tau \cdot \tau '\) we denote the concatenation of two schedules \(\tau \) and \(\tau '\). A sequence \(\sigma _0, t_1, \sigma _1, \ldots , \sigma _{k1}, t_k, \sigma _k\) of alternating configurations and transitions is called a (finite) path, if transition \(t_i\) is enabled in \(\sigma _{i1}\) and \(\sigma _i = t_i(\sigma _{i1})\), for \(1 \le i \le k\). For a configuration \(\sigma _0\) and a schedule \(\tau \) applicable to \(\sigma _0\), by \(\textsf {path}(\sigma _0, \tau )\) we denote the path \(\sigma _0, t_1, \ldots , t_{\tau }, \sigma _{\tau }\) with \(t_i = \tau [i]\) and \(\sigma _i = t_i(\sigma _{i1})\), for \(1 \le i \le \tau \).
3.2 Contexts and slices
The evaluation of the guards in the sets \(\varPhi ^{\mathrm {rise}}\) and \(\varPhi ^{\mathrm {fall}}\) in a configuration solely defines whether certain transitions are unlocked (but not necessarily enabled). From Proposition 3.1, one can see that after a transition has been applied, more guards from \(\varPhi ^{\mathrm {rise}}\) may get unlocked and more guards from \(\varPhi ^{\mathrm {fall}}\) may get locked. In other words, more guards from \(\varPhi ^{\mathrm {rise}}\) may evaluate to true and more guards from \(\varPhi ^{\mathrm {fall}}\) may evaluate to false. To capture this intuition, we define:
Definition 3.4
A context \(\varOmega \) is a pair \((\varOmega ^\mathrm {rise}, \varOmega ^{\mathrm {fall}})\) with \(\varOmega ^\mathrm {rise}\subseteq \varPhi ^{\mathrm {rise}}\) and \(\varOmega ^{\mathrm {fall}}\subseteq \varPhi ^{\mathrm {fall}}\). We denote by \(\varOmega  = \varOmega ^\mathrm {rise} + \varOmega ^{\mathrm {fall}}\).
For two contexts \((\varOmega ^\mathrm {rise}_1, \varOmega ^{\mathrm {fall}}_1)\) and \((\varOmega ^\mathrm {rise}_2, \varOmega ^{\mathrm {fall}}_2)\), we define that \((\varOmega ^\mathrm {rise}_1, \varOmega ^{\mathrm {fall}}_1) \sqsubset (\varOmega ^\mathrm {rise}_2, \varOmega ^{\mathrm {fall}}_2)\) if and only if \(\varOmega ^\mathrm {rise}_1 \cup \varOmega ^{\mathrm {fall}}_1 \subset \varOmega ^\mathrm {rise}_2 \cup \varOmega ^{\mathrm {fall}}_2\). Then, a sequence of contexts \(\varOmega _1, \ldots , \varOmega _m\) is monotonically increasing, if \(\varOmega _i \sqsubset \varOmega _{i+1}\), for \(1 \le i < m\). Further, a monotonically increasing sequence of contexts \(\varOmega _1, \ldots , \varOmega _m\) is maximal, if \(\varOmega _1 = (\emptyset , \emptyset )\) and \(\varOmega _m = (\varPhi ^{\mathrm {rise}}, \varPhi ^{\mathrm {fall}})\) and \(\varOmega _{i+1} = \varOmega _i + 1\), for \(1 \le i < m\). We obtain:
Proposition 3.2
Every maximal monotonically increasing sequence of contexts is of length \(\varPhi ^{\mathrm {rise}} + \varPhi ^{\mathrm {fall}} + 1\). There are at most \((\varPhi ^{\mathrm {rise}} + \varPhi ^{\mathrm {fall}})!\,\) such sequences.
Example 3.5
For the example in Fig. 2, we have \(\varPhi ^{\mathrm {rise}}= \{\varphi _1, \varphi _2, \varphi _3\}\), and \(\varPhi ^{\mathrm {fall}}= \emptyset \). Thus, there are \((\varPhi ^{\mathrm {rise}} + \varPhi ^{\mathrm {fall}})!=6\) maximal monotonically increasing sequences of contexts. Two of them are \((\emptyset ,\emptyset )\sqsubset (\{\varphi _1\},\emptyset ) \sqsubset (\{\varphi _1,\varphi _2\},\emptyset )\sqsubset ( \{\varphi _1, \varphi _2, \varphi _3\},\emptyset )\) and \((\emptyset ,\emptyset )\sqsubset (\{\varphi _3\},\emptyset )\sqsubset (\{\varphi _1,\varphi _3\},\emptyset ) \sqsubset (\{\varphi _1,\varphi _2, \varphi _3\}, \emptyset )\). All of them have length \(\varPhi ^{\mathrm {rise}} + \varPhi ^{\mathrm {fall}} + 1=4\).
To every configuration \(\sigma \), we attach the context consisting of all guards in \(\varPhi ^{\mathrm {rise}}\) that evaluate to true in \(\sigma \), and all guards in \(\varPhi ^{\mathrm {fall}}\) that evaluate to false in \(\sigma \):
Definition 3.5
Given a threshold automaton, we define its configuration context as a function \(\omega : \varSigma \rightarrow 2^{\varPhi ^{\mathrm {rise}}} \times 2^{\varPhi ^{\mathrm {fall}}}\) that for each configuration \(\sigma \in \varSigma \) gives a context \((\varOmega ^\mathrm {rise},\varOmega ^{\mathrm {fall}})\) with \(\varOmega ^\mathrm {rise}= \{ \varphi \in \varPhi ^{\mathrm {rise}}:\sigma \models \varphi \}\) and \(\varOmega ^{\mathrm {fall}}= \{ \varphi \in \varPhi ^{\mathrm {fall}}:\sigma \not \models \varphi \}\).
The following monotonicity result is a direct consequence of Proposition 3.1.
Proposition 3.3
If a transition t is enabled in a configuration \(\sigma \), then either \(\omega (\sigma ) \sqsubset \omega (t(\sigma ))\), or \(\omega (\sigma ) = \omega (t(\sigma ))\).
Definition 3.6
A schedule \(\tau \) is steady for a configuration \(\sigma \), if for every prefix \(\tau '\) of \(\tau \), the context does not change, i.e., \(\omega (\tau '(\sigma )) = \omega (\sigma )\).
Proposition 3.4
A schedule \(\tau \) is steady for a configuration \(\sigma \) if and only if \(\omega (\sigma ) = \omega (\tau (\sigma ))\).
In the following definition, we associate a sequence of contexts with a path:
Definition 3.7
Given a configuration \(\sigma \) and a schedule \(\tau \) applicable to \(\sigma \), we say that \(\textsf {path}(\sigma , \tau )\) is consistent with a sequence of contexts \(\varOmega _1, \ldots , \varOmega _m\), if there exist indices \(n_0,\ldots ,n_{m}\), with \(0=n_0\le n_1\le \ldots \le n_m=\tau +1\), such that for every k, \(1 \le k \le m\), and every i with \(n_{k1}\le i < n_k\), it holds that \(\omega (\tau ^i(\sigma )) = \varOmega _k\).
Every path is consistent with a uniquely defined maximal monotonically increasing sequence of contexts. (Some of the indices \(n_0,\dots ,n_m\) in Definition 3.7 may be equal.) In Sect. 4, we use such sequences of contexts to construct a schema recognizing many paths that are consistent with the same sequence of contexts.
A context defines which rules of the \(\textsf {TA}\) are unlocked. A schedule that is steady for a configuration visits only one context, and thus we can statically remove \(\textsf {TA}\)’s rules that are locked in the context:
Definition 3.8
Given a threshold automaton \(\textsf {TA}=({\mathcal L}, {\mathcal I}, \varGamma , \Pi , {\mathcal R},{\textit{RC}})\) and a context \(\varOmega \), we define the slice of \(\textsf {TA}\) with context \(\varOmega =(\varOmega ^\mathrm {rise},\varOmega ^{\mathrm {fall}})\) as a threshold automaton \({\textsf {TA}}_{\varOmega }=({\mathcal L}, {\mathcal I}, \varGamma , \Pi , {{\mathcal R}}_{\varOmega }, {\textit{RC}})\), where a rule \(r\in {\mathcal R}\) belongs to \({{\mathcal R}}_{\varOmega }\) if and only if \(\big (\bigwedge _{\varphi \in \varOmega ^\mathrm {rise}} \varphi \big ) \rightarrow r.\varphi ^{\mathrm {rise}}\) and \(\big (\bigwedge _{\psi \in \varPhi ^{\mathrm {fall}}{\setminus } \varOmega ^{\mathrm {fall}}} \psi \big ) \rightarrow r.\varphi ^{\mathrm {fall}}\).
3.3 Model checking problem: parameterized reachability
Given a threshold automaton \(\textsf {TA}\), a state property B is a Boolean combination of formulas that have the form \(\bigwedge _{i \in Y} {\mathbf {\varvec{\kappa }}}[i] = 0\), for some \(Y \subseteq {\mathcal L}\). The parameterized reachability problem is to decide whether there are parameter values \(\mathbf {p}\in \mathbf {P}_{RC}\), an initial configuration \(\sigma _0 \in I\), with \(\sigma _0.\mathbf {p}= \mathbf {p}\), and a schedule \(\tau \), such that \(\tau \) is applicable to \(\sigma _0\), and property B holds in the final state: \(\tau (\sigma _0) \models B\).
4 Main result: a complete set of schemas
To address parameterized reachability, we introduce schemas, i.e., alternating sequences of contexts and rule sequences. A schema serves as a pattern for a set of paths, and is used to efficiently encode parameterized reachability in SMT. As parameters give rise to infinitely many initial states, a schema captures an infinite set of paths. We show how to construct a finite set of schemas \(\mathcal{S}\) with the following property: for each schedule \(\tau \) and each configuration \(\sigma \) there is a representative schedule \(s(\tau )\) such that: (1) applying \(s(\tau )\) to \(\sigma \) results in \(\tau (\sigma )\), and (2) \(\textsf {path}(\sigma , s(\tau ))\) is generated by a schema from \(\mathcal{S}\).
Definition 4.1
A schema is a sequence \(\varOmega _0, \rho _1, \varOmega _1, \dots , \rho _m, \varOmega _m\) of alternating contexts and rule sequences. We often write \(\{\varOmega _0\} \rho _1 \{\varOmega _1\} \dots \{\varOmega _{m1}\} \rho _m \{\varOmega _m\}\) for a schema. A schema with two contexts is called simple.
Given two schemas \(S_1 =\varOmega _0, \rho _1, \dots , \rho _k, \varOmega _k\) and \(S_2 = \varOmega '_0, \rho '_1, \dots , \rho '_m, \varOmega '_m\) with \(\varOmega _k = \varOmega '_0\), we define their composition \(S_1\,\circ \,S_2\) to be the schema that is obtained by concatenation of the two sequences: \(\varOmega _0, \rho _1, \dots , \rho _k, \varOmega '_0, \rho '_1, \dots , \rho '_m, \varOmega '_m\).
Definition 4.2

For \(\rho = r_1, \dots , r_k\) there is a monotonically increasing sequence of indices \(i(1), \dots , i(m)\), i.e., \(1 \le i(1)< \cdots < i(m) \le k\), and there are factors \(f_1, \dots , f_m \ge 0\), so that schedule \((r_{i(1)}, f_1), \dots , (r_{i(m)}, f_m) = \tau \).

The first and the last states match the contexts: \(\omega (\sigma ) = \varOmega \) and \(\omega (\tau (\sigma )) = \varOmega '\).
Remark 4.1
Definition 4.2 allows schemas to generate paths that have transitions with zero acceleration factors. Applying a transition with a zero factor to a configuration \(\sigma \) results in the same configuration \(\sigma \), which corresponds to a stuttering step. This does not affect reachability. In the following, we will apply Definition 4.2 to representative paths that may have transitions with zero factors.
Example 4.1
Let us go back to the example of a schema S and a schedule \(\tau '\) introduced in Eqs. (2.1) and (2.2) in Sect. 2.1. It is easy to see that schema S can be decomposed into four simple schemas \(S_1 \circ \dots \circ S_4\), e.g., \(S_1 = \{\}\ r_1, r_1\ \{\varphi _1\}\) and \(S_2=\{\varphi _1\}\ r_1, r_3, r_4, r_4\ \{\varphi _1, \varphi _2\}\). Consider an initial state \(\sigma _0\) with \(n=5\), \(t=f=1\), \(x=y=0\), \({\mathbf {\varvec{\kappa }}}[\ell _1] = 1\), \({\mathbf {\varvec{\kappa }}}[\ell _2] = 3\), and \({\mathbf {\varvec{\kappa }}}[\ell _i]=0\) for \(i \in \{3, 4, 5\}\). To ensure that \(\textsf {path}(\sigma _0, \tau ')\) is generated by schema S, one has to check Definition 4.2 for schemas \(S_1, \dots , S_4\) and schedules \((\tau '_1 \cdot t_1)\), \((\tau '_2 \cdot t_2)\), \((\tau '_3 \cdot t_3)\), and \(\tau '_4\), respectively. For instance, \(\textsf {path}(\sigma _0, \tau '_1 \cdot t_1)\) is generated by \(S_1\). Indeed, take the sequence of indices 1 and 2 and the sequence of acceleration factors 1 and 1. The path \(\textsf {path}(\sigma _0, \tau '_1 \cdot t_1)\) ends in the configuration \(\sigma _1\) that differs from \(\sigma _0\) in that \({\mathbf {\varvec{\kappa }}}[\ell _2]=1\), \({\mathbf {\varvec{\kappa }}}[\ell _3]=2\), and \(x=2\). The contexts \(\omega (\sigma _0) = (\{\}, \{\})\) and \(\omega (\sigma _1)=(\{\varphi _1\}, \{\})\) match the contexts of schema \(S_1\), as required by Definition 4.2.
Similarly, \(\textsf {path}(\sigma _1, \tau '_2 \cdot t_2)\) is generated by schema \(S_2\). To see that, compare the contexts and use the index sequence 1, 2, 4, and acceleration factors 1.
The language of a schema S —denoted with \(\mathcal{L}(S)\) —is the set of all paths generated by S. For a set of configurations \(C \subseteq \varSigma \) and a set of schemas \(\mathcal{S}\), we define the set \(\textsf {Reach}(C, \mathcal{S})\) to contain all configurations reachable from C via the paths generated by the schemas from \(\mathcal{S}\), i.e., \( \textsf {Reach}(C, \mathcal{S}) = \{ \tau (\sigma ) \mid \sigma \in C,\ \exists S \in \mathcal{S}.\ \textsf {path}(\sigma , \tau ) \in \mathcal{L}(S) \}\). We say that a set \(\mathcal{S}\) of schemas is complete, if for every set of configurations \(C\subseteq \varSigma \) it is the case that the set of all states reachable from C via the paths generated by the schemas from \(\mathcal{S}\), is exactly the set of all possible states reachable from C. Formally, \(\forall C \subseteq \varSigma .\; \{ \tau (\sigma ) \mid \sigma \in C,\ \tau \text{ is } \text{ applicable } \text{ to } \sigma \} = \textsf {Reach}(C, \mathcal{S})\).
In [41], a quantity \({\mathcal C}\) has been introduced that depends on the number of conditions in a TA. It has been shown that for every configuration \(\sigma \) and every schedule \(\tau \) applicable to \(\sigma \), there is a schedule \(\tau '\) of length at most \(d={\mathcal R} \cdot ({\mathcal C}+ 1) + {\mathcal C}\) that is also applicable to \(\sigma \) and results in \(\tau (\sigma )\) [41, Thm. 8]. Hence, by enumerating all sequences of rules of length up to d, one can construct a complete set of schemas:
Theorem 4.1
For a threshold automaton, there is a complete schema set \(\mathcal{S}_d\) of cardinality \({\mathcal R}^{{\mathcal R} \cdot ({\mathcal C}+ 1) + {\mathcal C}}\).
Although the set \(\mathcal{S}_d\) is finite, enumerating all its elements is impractical. We show that there is a complete set of schemas whose cardinality solely depends on the number of guards that syntactically occur in the TA. These numbers \(\varPhi ^{\mathrm {rise}}\) and \(\varPhi ^{\mathrm {fall}}\) are in practice much smaller than the number of rules \({\mathcal R}\):
Theorem 4.2
For all threshold automata, there exists a complete schema set of cardinality at most \((\varPhi ^{\mathrm {rise}} + \varPhi ^{\mathrm {fall}})!\). In this set, the length of each schema does not exceed \((3 \cdot \varPhi ^{\mathrm {rise}}\cup \varPhi ^{\mathrm {fall}} + 2) \cdot {\mathcal R}\).
 (1)
We show that for each configuration \(\sigma \) and each schedule \(\tau \) applicable to \(\sigma \) and consistent with the sequence z, there is a schedule \(s(\tau )\) that has a specific structure, and is also applicable to \(\sigma \). We call \(s(\tau )\) the representative of \(\tau \). We introduce and formally define this specific structure of representative schedules in Sects. 5, 6 and 7. We prove existence and properties of the representative schedule in Theorem 7.1 (Sect. 7). Before that we consider special cases: when all rules of a schedule belong to the same looplet (Theorem 5.1, Sect. 5), and when a schedule is steady (Theorem 6.1, Sect. 6).
 (2)
Next we construct a schema (for the sequence z) and show that it generates all paths of all schedules \(s(\tau )\) found in (1). The length of the schema is at most \((3 \cdot (\varPhi ^{\mathrm {rise}} + \varPhi ^{\mathrm {fall}}) + 2) \cdot {\mathcal R}\). This is shown in Theorem 7.2 (Sect. 7).
Remark 4.2
Let us stress the difference between [41] and this work. From [41], it follows that in order to check correctness of a \(\textsf {TA}\) it is sufficient to check only the schedules of bounded length \(d(\textsf {TA})\). The bound \(d(\textsf {TA})\) does not depend on the parameters, and can be computed for each \(\textsf {TA}\). The proofs in [41] demonstrate that every schedule longer than \(d(\textsf {TA})\) can be transformed into an “equivalent” representative schedule, whose length is bounded by \(d(\textsf {TA})\). Consequently, one can treat every schedule of length up to \(d(\textsf {TA})\) as its own representative schedule. Similar reasoning does not apply to the schemas constructed in this paper: (i) we construct a complete set of schemas, whose cardinality is substantially smaller than \(\mathcal{S}_d\), and (ii) the schemas constructed in this paper can be twice as long as the schemas in \(\mathcal{S}_d\).
As discussed in Remark 3.2, the looplets in our case studies are typically either singleton looplets or looplets of size two. In fact, most of our benchmarks have singleton looplets only, and thus their threshold automata can be reduced to directed acyclic graphs. The theoretical constructs of Sect. 5.2 are presented for the more general case of looplets of any size. For most of the benchmarks —the ones not using failure detectors —we need only the simple construction laid out in Sect. 5.1.
5 Case I: one context and one looplet
We show that for each schedule that uses only the rules from a fixed looplet and does not change its context, there exists a representative schedule of bounded length that reaches the same final state. The goal is to construct a single schema per looplet. The technical challenge is that this single schema must generate representative schedules for all possible schedules, where, intuitively, processes may move arbitrarily between all local states in the looplet. As a consequence, the rules that appear in the representative schedules can differ from the rules that appear in the arbitrary schedules visiting a looplet.
We fix a threshold automaton, a context \(\varOmega \), a configuration \(\sigma \) with \(\omega (\sigma ) = \varOmega \), a looplet c, and a schedule \(\tau \) applicable to \(\sigma \) and using only rules from c. We then construct the representative schedule \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) and the schema \(\mathsf {cschema}^{\varOmega }_{c}\).
The technical details of the construction of \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) for the case when \(c=1\) is given in Sect. 5.1, and for the case when \(c>1\) in Sect. 5.2. We show in Sect. 5.3 that these constructions give us a schedule that has the desired properties: it reaches the same final state as the given schedule \(\tau \), and its length does not exceed \(2 \cdot c\).
Note that in [41], the length of the representative schedule was bounded by c. However, all representative schedules of a looplet in this section can be generated by a single looplet schema.
5.1 Singleton looplet
Let us consider the case of the looplet c containing only one transition, that is, \(c=1\). There is a trivial representative schedule of a single transition:
Lemma 5.1
Given a threshold automaton, a configuration \(\sigma \), and a schedule \(\tau = (r, f_1)\), ..., \((r, f_m)\) applicable to \(\sigma \), one of the two schedules is also applicable to \(\sigma \) and results in \(\tau (\sigma )\): schedule \((r, f_1 + \cdots + f_m)\), or schedule (r, 0).
Proof
We distinguish two cases:
Case \({{r.to} = {r.from}}\) Then, \(r.\mathbf {u}= \mathbf {0}\), and \(\tau ^k(\sigma ) = \sigma \) for \(0 \le k \le \tau \). Consequently, the schedule (r, 0) is applicable to \(\sigma \), and it results in \(\tau (\sigma )=\sigma \).
Inductive step \(k > 1\). As schedule \(\tau \) is applicable to \(\sigma \), its prefix \(\tau ^k\) is applicable to \(\sigma \). Hence, transition \(\tau [k]\) is applicable to \(\tau ^{k1}(\sigma )\).
By applying \(\tau [k]\), we get that \((\tau ^k(\sigma )).{\mathbf {\varvec{\kappa }}}[r.{ from }] = (\tau ^{k1}(\sigma )).{\mathbf {\varvec{\kappa }}}[r.{ from }]  f_k\) and \((\tau ^k(\sigma )).\mathbf {g}= (\tau ^{k1}(\sigma )).\mathbf {g}+ f_k \cdot r.\mathbf {u}\). By applying (5.1) and (5.2) for \(k1\) to these equations, we arrive at the Eqs. (5.1) and (5.2) for k.
Based on (5.1) and (5.3) for all values of k, and in particular \(k=m\), we can now show applicability. From Eq. (5.1), we immediately obtain that \(\sigma .{\mathbf {\varvec{\kappa }}}[r.{ from }] \ge f_1 + \dots + f_m\). From constraint (5.3), we obtain that \((\sigma .{\mathbf {\varvec{\kappa }}}, \sigma .\mathbf {g}+ f \cdot r.\mathbf {u}, \sigma .\mathbf {p}) \models r.\varphi ^{\mathrm {fall}}\wedge r.\varphi ^{\mathrm {rise}}\) for all \(f \in \{0, \dots , f_1 + \dots + f_m\}\). These are the required conditions for the transition \((r, f_1 + \dots + f_m)\) to be applicable to the configuration \(\sigma \). \(\square \)
Consequently, when c has a single rule r, for configuration \(\sigma \) and a schedule \(\tau = (r, f_1), \ldots , (r, f_m)\), Lemma 5.1 allows us to take the singleton schedule (r, f) as \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) and to take the singleton schema \(\{\varOmega \}\,r\,\{\varOmega \}\) as \(\mathsf {cschema}^{\varOmega }_{c}\). The factor f is either \(f_1 +\ldots + f_m\) or zero.
5.2 Nonsingleton looplet
Next we focus on nonsingleton looplets. Thus, we assume that \(c > 1\). Our construction is based on two directed trees, whose undirected versions are spanning trees, sharing the same root. In order to find a representative of a steady schedule \(\tau \) which leads from \(\sigma \) to \(\tau (\sigma )\), we determine for each local state how many processes have to move in or out of the state, and then we move them along the edges of the trees. First, we give the definitions of such trees, and then we show how to use them to construct the representative schedules and the schema.
Spanning outtrees and intrees
Lemma 5.2
Given a threshold automaton and a nonsingleton looplet \(c \in {\mathcal R}/{\sim }\), graph \(G_c\) is nonempty and strongly connected.
Proof
As, \(c > 1\) and thus \(E_c \ge 2\), graph \(G_c\) is nonempty. To prove that \(G_c\) is strongly connected, we consider a pair of rules \(r_1, r_2 \in c\). By the definition of a looplet, it holds that \(r_1 \prec ^+_{\scriptscriptstyle { P }}r_2\) and \(r_2 \prec ^+_{\scriptscriptstyle { P }}r_1\). Thus, there is a path in \(G_c\) from \(r_1.{ to }\) to \(r_2.{ from }\), and there is a path in \(G_c\) from \(r_2.{ to }\) to \(r_1.{ from }\). As \(r_1\) and \(r_2\) correspond to some edges in \(G_c\), there is a cycle that contains the vertices \(r_1.{ from }\), \(r_1.{ to }\), \(r_2.{ from }\), and \(r_2.{ to }\). Thus, graph \(G_c\) is strongly connected. \(\square \)
Further, we fix a topological order \(\preceq _\mathsf {in}\) on the edges of tree \(T_\mathsf {in}\). More precisely, \(\preceq _\mathsf {in}\) is such a partial order on \(E_\mathsf {in}\) that for each pair of adjacent edges \((\ell , \ell '), (\ell ', \ell '') \in E_\mathsf {in}\), it holds that \((\ell , \ell ') \preceq _\mathsf {in}(\ell ', \ell '')\). In the same way, we fix a topological order \(\preceq _\mathsf {out}\) on the edges of tree \(T_\mathsf {out}\).
Example 5.1
Consider again the threshold automaton from Example 3.3 and Fig. 3. We construct trees \(T_\mathsf {in}\) and \(T_\mathsf {out}\) for looplet \(c_2\), shown in Fig. 6.
Note that \(V_c=\{\ell _2, \ell _3, \ell _4, \ell _5, \ell _6\}\), and \(E_c=\{(\ell _2,\ell _3), (\ell _3,\ell _5), (\ell _5,\ell _6), (\ell _6,\ell _4),\) \((\ell _4, \ell _4), (\ell _4,\ell _5), (\ell _4,\ell _2)\}.\) Fix \(\ell _4\) as a hub. We can fix a linear order \(\preceq _\mathsf {in}\) such that \((\ell _2,\ell _3) \preceq _\mathsf {in}(\ell _3, \ell _5)\preceq _\mathsf {in}(\ell _5,\ell _6) \preceq _\mathsf {in}(\ell _6,\ell _4)\), and a linear order \(\preceq _\mathsf {out}\) such that \((\ell _4,\ell _2) \preceq _\mathsf {out}(\ell _2, \ell _3)\preceq _\mathsf {out}(\ell _4,\ell _5)\preceq _\mathsf {out}(\ell _5,\ell _6)\).
Note that for the chosen hub \( l_4\) and this specific example, \(T_\mathsf {in}\) and \(\preceq _\mathsf {in}\) are uniquely defined, while an outtree can be different from \(T_\mathsf {out}\) from our Fig. 6 (the rules \(r_8, r_2, r_3, r_4\) constitute a different tree from the same hub). Because outtree \(T_\mathsf {out}\) is not a chain, several linear orders different from \(\preceq _\mathsf {out}\) can be chosen, e.g., \((\ell _4,\ell _2)\preceq _\mathsf {out}(\ell _4,\ell _5) \preceq _\mathsf {out}(\ell _2, \ell _3)\preceq _\mathsf {out}(\ell _5,\ell _6)\).
Representatives of nonsingleton looplets
Example 5.2
Consider the TA shown in Fig. 7. Let c be the fourelement looplet that contains the rules \(r_1\), \(r_2\), \(r_3\), and \(r_4\), and \(\tau \) be the schedule \(\tau = (r_4,1),(r_3,1)\), \((r_4,1),(r_1,1),(r_2,1),(r_3,1),(r_1,1),(r_4,1),(r_1,1)\) that uses the rules of the looplet c. Consider a configuration \(\sigma \) with \(\sigma .{\mathbf {\varvec{\kappa }}}[\ell _3] =\sigma .{\mathbf {\varvec{\kappa }}}[\ell _4]= 1\), and \(\sigma .{\mathbf {\varvec{\kappa }}}[\ell _1] =\sigma .{\mathbf {\varvec{\kappa }}}[\ell _2]= 0\). The final configuration \(\sigma '=\tau (\sigma )\) has the following properties: \(\sigma '.{\mathbf {\varvec{\kappa }}}[\ell _2]= 2\) and \(\sigma '.{\mathbf {\varvec{\kappa }}}[\ell _1] = \sigma '.{\mathbf {\varvec{\kappa }}}[\ell _3] =\sigma '.{\mathbf {\varvec{\kappa }}}[\ell _4]= 0\). By comparing \(\sigma \) and \(\sigma '\), we notice that one process should move from \(\ell _3\) to \(\ell _2\), and one from \(\ell _4\) to \(\ell _2\). We will now show how this is achieved by our construction.
For constructing the representative schedule \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\), we first define trees \(T_\mathsf {in}\) and \(T_\mathsf {out}\). If we chose \(\ell _1\) to be the hub, we get that \(E_\mathsf {in}= \{(\ell _4, \ell _1), (\ell _3,\ell _4), (\ell _2,\ell _3)\}\), and thus the order is \((\ell _2,\ell _3)\preceq _\mathsf {in}(\ell _3,\ell _4) \preceq _\mathsf {in}(\ell _4, \ell _1)\). Therefore, we obtain \(e_{\mathsf {in}}(1) = (\ell _2,\ell _3)\), \(e_{\mathsf {in}}(2) = (\ell _3,\ell _4)\) and \(e_{\mathsf {in}}(3) = (\ell _4,\ell _1)\). By calculating \(\delta _{\mathsf {in}}(i)\) for every \(i\in \{1,2,3\}\), we see that \(\delta _{\mathsf {in}}(2)=1\) and \(\delta _{\mathsf {in}}(3)=1\) are positive. Consequently, two processes go to the hub: one from \(r_\mathsf {in}(2).{ from }= \ell _3\) and one from \(r_\mathsf {in}(3).{ from }=\ell _4\). The coefficients \(w_\mathsf {in}\) give us acceleration factors for all rules.
Similarly, we obtain \(E_\mathsf {out}= \{(\ell _1,\ell _2), (\ell _2,\ell _3), (\ell _3,\ell _4)\}\), and the order must be \((\ell _1,\ell _2) \preceq _\mathsf {out}(\ell _2,\ell _3)\preceq _\mathsf {out}(\ell _3,\ell _4)\). Thus, \(e_{\mathsf {out}}(1) = (\ell _1,\ell _2)\), \(e_{\mathsf {in}}(2) = (\ell _2,\ell _3)\), and \(e_{\mathsf {out}}(3) = (\ell _3,\ell _4)\). Here only \(\delta _{\mathsf {out}}(1)=2\) has a positive value, and hence, two processes should move from hub to the local state \(r_\mathsf {out}(1).{ to }= \ell _2\). To achieve this, the acceleration factor of every rule \(r_\mathsf {out}(i)\), \(1\le i\le 3\), must be \(w_\mathsf {out}(i)\).
In the following, we fix a threshold automaton \(\textsf {TA}\), a context \(\varOmega \), and a nonsingleton looplet c of the slice \({\textsf {TA}}_{\varOmega }\). We also fix a configuration \(\sigma \) of \(\textsf {TA}\) and a schedule \(\tau \) that is contained in c and is applicable to \(\sigma \). Our goal is to prove Lemma 5.8, which states that \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) is indeed applicable to \(\sigma \) and ends in \(\tau (\sigma )\). To this end, we first prove auxiliary Lemmas 5.3–5.7.
Lemma 5.3
For every \(i: 1 \le i \le E_\mathsf {in}\), it holds that \(\sigma .{\mathbf {\varvec{\kappa }}}[r_i.{ from }] \ge \max (\delta _{\mathsf {in}}(i), 0)\), where \(r_i = L_c(e_{\mathsf {in}}(i))\).
Proof
Recall that by the definition of a configuration, every counter \(\sigma .{\mathbf {\varvec{\kappa }}}[\ell ]\) is nonnegative. If \(\delta _{\mathsf {in}}(i) \ge 0\), then \(\max (\delta _{\mathsf {in}}(i), 0) = \delta _{\mathsf {in}}(i) = \sigma .{\mathbf {\varvec{\kappa }}}[r_i.{ from }]  \sigma '.{\mathbf {\varvec{\kappa }}}[r_i.{ from }]\), which is bound from above by \(\sigma .{\mathbf {\varvec{\kappa }}}[r_i.{ from }]\). Otherwise, \(\delta _{\mathsf {in}}(i) \le 0\), and we trivially have \(\max (\delta _{\mathsf {in}}(i), 0) = 0\) and \(0 \le \sigma .{\mathbf {\varvec{\kappa }}}[r_i.{ from }]\). \(\square \)
Lemma 5.4
Schedule \(\tau _\mathsf {in}= (r_\mathsf {in}(1), w_{\mathsf {in}}(1)), \dots , (r_\mathsf {in}(E_\mathsf {in}), w_{\mathsf {in}}(E_\mathsf {in}))\) is applicable to configuration \(\sigma \).
Proof
We denote by \(\alpha ^i\) the schedule \((r_\mathsf {in}(1), w_{\mathsf {in}}(1)), \dots , (r_\mathsf {in}(i), w_{\mathsf {in}}(i))\), for \(1 \le i \le E_\mathsf {in}\). Then \(\tau _\mathsf {in}=\alpha ^{E_\mathsf {in}}\).
All rules \(r_\mathsf {in}(1), \ldots , r_\mathsf {in}(E_\mathsf {in})\) are from \({{\mathcal R}}_{\varOmega }\), and thus are unlocked. Hence, it is sufficient to show that the values of the locations from the set \(V_c\) are large enough to enable each transition \((r_{\mathsf {in}}(i), w_{\mathsf {in}}(i))\) for \(1 \le i \le E_\mathsf {in}\). To this end, we prove by induction that \((\alpha ^{i1}(\sigma )).{\mathbf {\varvec{\kappa }}}[r_i.{ from }] \ge w_{\mathsf {in}}(i)\), for \( 1 \le i \le E_\mathsf {in}\) and \(r_i= L_c(e_{\mathsf {in}}(i))\).
Base case \(i=1\). For \(r_1 = L_c(e_{\mathsf {in}}(1))\), we want to show that \(\sigma .{\mathbf {\varvec{\kappa }}}[r_1.{ from }] \ge w_{\mathsf {in}}(1)\). As \(e_\mathsf {in}(1)\) is the first element of the sequence \(e_\mathsf {in}(1), \dots , e_\mathsf {in}(E_\mathsf {in})\), which respects the order \(\preceq _\mathsf {in}\), we conclude that \(w_{\mathsf {in}}(1) = \max (\delta _{\mathsf {in}}(1), 0)\). From Lemma 5.3, it follows that \(\sigma .{\mathbf {\varvec{\kappa }}}[r_1.{ from }] \ge \max (\delta _{\mathsf {in}}(1), 0)\).
Inductive step k assume that for all \(i: 1 \le i \le k  1 < E_\mathsf {in}\), schedule \(\alpha ^i\) is applicable to \(\sigma \) and show that \((\alpha ^{k1}(\sigma )).{\mathbf {\varvec{\kappa }}}[r_k.{ from }] \ge w_{\mathsf {in}}(k)\) with \(r_k = L_c(e_{\mathsf {in}}(k))\).
From Eq. (5.5) and Lemma 5.3, we conclude that \((\alpha ^{k1}(\sigma )).{\mathbf {\varvec{\kappa }}}[r_k.{ from }]\) is not less than \(\max (\delta _{\mathsf {in}}(k), 0) + \sum _{e_{\mathsf {in}}(j) :e_{\mathsf {in}}(j)\, \preceq _\mathsf {in}\, e_{\mathsf {in}}(k),\ j \ne k} \max (\delta _{\mathsf {in}}(j), 0)\), which equals to \(w_{\mathsf {in}}(k)\). This proves the inductive step.
Therefore, we have shown that \(\tau _\mathsf {in}= \alpha ^{E_\mathsf {in}}\) is applicable to \(\sigma \). \(\square \)
The following lemma is easy to prove by induction on the length of a schedule. The base case for a single transition follows from the definition of a counter system.
Lemma 5.5
Let \(\sigma \) and \(\sigma '\) be two configurations and \(\tau \) be a schedule applicable to \(\sigma \) such that \(\tau (\sigma ) = \sigma '\). Then it holds that \(\sum _{\ell \in {\mathcal L}} (\sigma '[\ell ]  \sigma [\ell ]) = 0\).
Further, we show that the required number of processes is reaching (or leaving) the hub, when the transitions derived from the trees \(T_\mathsf {in}\) and \(T_\mathsf {out}\) are executed:
Lemma 5.6
Proof
Lemma 5.7
Proof
We prove the lemma by case distinction:
Case \(\ell = h\) We show that \((\tau _\mathsf {in}(\sigma )).{\mathbf {\varvec{\kappa }}}[h] = \sigma .{\mathbf {\varvec{\kappa }}}[h] + \sum _{1 \le i \le E_\mathsf {in}} \max (\delta _{\mathsf {in}}(i), 0)\). Indeed, let P be the indices of edges coming into h, i.e., \(P = \{ i \mid 1 \le i \le E_\mathsf {in},\ L_c(e_{\mathsf {in}}(i)) = r,\ h = r.{ to }\}\). As all edges in \(T_\mathsf {in}\) are oriented towards h, it holds that \((\tau _\mathsf {in}(\sigma )).{\mathbf {\varvec{\kappa }}}[h]\) equals to \(\sigma .{\mathbf {\varvec{\kappa }}}[h] + \sum _{i \in P} w_{\mathsf {in}}(i)\). By unfolding the definition of \(w_\mathsf {in}\), we obtain that \((\tau _\mathsf {in}(\sigma )).{\mathbf {\varvec{\kappa }}}[h] = \sigma .{\mathbf {\varvec{\kappa }}}[h] + \sum _{1 \le i \le E_\mathsf {in}} \max (\delta _{\mathsf {in}}(i), 0)\). We observe that by Lemma 5.6, this sum equals to \(\sigma '.{\mathbf {\varvec{\kappa }}}[h] + \sum _{1 \le i \le E_\mathsf {out}} \max (\delta _{\mathsf {out}}(i), 0)\). This proves the first case.
Case \(\ell \in V_c {\setminus } \{h\}\) We show that \((\tau _\mathsf {in}(\sigma )).{\mathbf {\varvec{\kappa }}}[\ell ] = \min (\sigma .{\mathbf {\varvec{\kappa }}}[\ell ], \sigma '.{\mathbf {\varvec{\kappa }}}[\ell ])\). Indeed, fix a node \(\ell \in V_c {\setminus } \{h\}\) and construct two sets: the set of incoming edges \( In = \{e_{\mathsf {in}}(i) \mid \exists \ell ' \in V_c.\ e_{\mathsf {in}}(i) = (\ell ', \ell ) \}\) and the singleton set of outgoing edges \( Out = \{e_{\mathsf {in}}(i) \mid \exists \ell ' \in V_c.\ e_{\mathsf {in}}(i) = (\ell , \ell ') \}\). By summing up the effect of all transitions in \(\tau _\mathsf {in}\), we obtain \((\tau _\mathsf {in}(\sigma )).{\mathbf {\varvec{\kappa }}}[\ell ] = \sigma .{\mathbf {\varvec{\kappa }}}[\ell ] + \sum _{e_{\mathsf {in}}(i) \in In } w_{\mathsf {in}}(i)  \sum _{e_{\mathsf {out}}(i) \in Out } w_{\mathsf {out}}(i)\). By unfolding the definition of \(w_\mathsf {in}\), we obtain \((\tau _\mathsf {in}(\sigma )).{\mathbf {\varvec{\kappa }}}[\ell ] = \sigma .{\mathbf {\varvec{\kappa }}}[\ell ]  \sum _{e_{\mathsf {in}}(i) \in Out } \delta _{\mathsf {in}}(i)\), which can be rewritten as \(\sigma .{\mathbf {\varvec{\kappa }}}[\ell ]  \max (\sigma .{\mathbf {\varvec{\kappa }}}[\ell ]  \sigma '.{\mathbf {\varvec{\kappa }}}[\ell ], 0)\), which, in turn, equals to \(\min (\sigma .{\mathbf {\varvec{\kappa }}}[\ell ], \sigma '.{\mathbf {\varvec{\kappa }}}[\ell ])\). This proves the second case. \(\square \)
Now we are in a position to prove that schedule \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) is applicable to configuration \(\sigma \) and results in configuration \(\tau (\sigma )\):
Lemma 5.8
The schedule \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) has the following properties: (a) \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) is applicable to \(\sigma \), and (b) \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) results in \(\tau (\sigma )\) when applied to \(\sigma \).
Proof
Denote with \(\tau _\mathsf {in}\) the prefix \((r_\mathsf {in}(1), w_{\mathsf {in}}(1)), \ldots , (r_\mathsf {in}(E_\mathsf {in}), w_{\mathsf {in}}(E_\mathsf {in}))\) of the schedule \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\). For each \(j: 1 \le j \le E_\mathsf {out}\), denote with \(\beta ^j\) the prefix of \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) that has length of \(E_\mathsf {in} + j\). Note that \(\beta ^{E_\mathsf {out}} = \mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\).
Proving applicability of \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) to \(\sigma \) We notice that all rules in \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) are from \({{\mathcal R}}_{\varOmega }\) and thus are unlocked, and that \(\tau _\mathsf {in}\) is applicable to \(\sigma \) by Lemma 5.4. Hence, we only have to check that the values of counters from \(V_c\) are large enough, so that transitions \((r_{\mathsf {out}}(j), w_{\mathsf {out}}(j))\) can fire.
We prove that each schedule \(\beta ^j\) is applicable to \(\sigma \), for \(j: 1 \le j \le E_\mathsf {out}\). We do so by induction on the distance from the root h in the tree \(T_\mathsf {out}\).
Base case root node h. Denote with \(O_h\) the set \(\{(\ell , \ell ') \in E_\mathsf {out}\mid \ell = h \}\). Let \(j_1, \dots , j_m\) be the indices of all edges in \(O_h\), and \(j_m\) be the maximum among them.
From Lemma 5.7, \((\tau _\mathsf {in}(\sigma )).{\mathbf {\varvec{\kappa }}}[h] = \sigma '.{\mathbf {\varvec{\kappa }}}[h] + \sum _{1 \le i \le E_\mathsf {out}} \max (\delta _{\mathsf {out}}(i), 0) = \sigma '.{\mathbf {\varvec{\kappa }}}[h] + \sum _{e_{\mathsf {out}}(j) \in O_h} w_{\mathsf {out}}(j)\). Thus, every transition \((e_{\mathsf {out}}(j), w_{\mathsf {out}}(j))\) with \(e_{\mathsf {out}}(j)\in O_h\), is applicable to \(\beta ^{j1}(\sigma )\). Also, \((\beta ^{j_m}(\sigma )).{\mathbf {\varvec{\kappa }}}[h] = \sigma '.{\mathbf {\varvec{\kappa }}}[h]\).
Inductive step assume that for a node \(\ell \in V_c\) and an edge \(e_{\mathsf {out}}(k) = (\ell , \ell ') \in E_\mathsf {out}\) outgoing from node \(\ell \), schedule \(\beta ^k\) is applicable to configuration \(\sigma \). Show that for each edge \(e_{\mathsf {out}}(i)\) outgoing from node \(\ell '\) the following hold: (i) schedule \(\beta ^i\) is also applicable to \(\sigma \); and (ii) \(\beta ^{E_\mathsf {out}}(\sigma ).{\mathbf {\varvec{\kappa }}}[\ell '] = \sigma '.{\mathbf {\varvec{\kappa }}}[\ell ']\).
(i) As the sequence \(\{e_{\mathsf {out}}(j)\}_{j\le E_\mathsf {out}}\) is topologically sorted, for each edge \(e_{\mathsf {out}}(i)\) outgoing from node \(\ell '\), it holds that \(k < i\).
From Lemma 5.7, we have that \(\beta ^k(\sigma ).{\mathbf {\varvec{\kappa }}}[\ell '] = \min (\sigma .{\mathbf {\varvec{\kappa }}}[\ell '], \sigma '.{\mathbf {\varvec{\kappa }}}[\ell '])\). Because the transition \((e_{\mathsf {out}}(k), w_{\mathsf {out}}(k))\) adds \(w_{\mathsf {out}}(k)\) to \(\beta ^{k1}(\sigma ).{\mathbf {\varvec{\kappa }}}[\ell ']\), we have \(\beta ^k(\sigma ).{\mathbf {\varvec{\kappa }}}[\ell '] = \min (\sigma .{\mathbf {\varvec{\kappa }}}[\ell '], \sigma '.{\mathbf {\varvec{\kappa }}}[\ell ']) + w_{\mathsf {out}}(k)\). Let S be the set of all immediate successors of \(e_\mathsf {out}(k)\), i.e., \(S = \{ i \mid \exists \ell ''.\ (\ell ', \ell '') = e_\mathsf {out}(i) \}\). From the definition of \(w_{\mathsf {out}}(k)\), it follows that \(w_{\mathsf {out}}(k) = \max (\delta _{\mathsf {out}}(k), 0) + \sum _{s \in S} w_{\mathsf {out}}(s)\). Thus, the transition \((e_{\mathsf {out}}(i), w_{\mathsf {out}}(i))\) for edge \(e_{\mathsf {out}}(i)\) outgoing from node \(\ell '\), can be executed.
This proves that the schedule \(\beta ^{E_\mathsf {out}}=\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) is applicable to \(\sigma \).
Proving that \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) results in \(\tau (\sigma )\) From the induction above, we conclude that for each \(\ell \in V_c\), it holds that \((\beta ^{E_\mathsf {out}}(\sigma )).{\mathbf {\varvec{\kappa }}}[\ell ] = \sigma '.{\mathbf {\varvec{\kappa }}}[\ell ]\). Edges in the trees \(T_\mathsf {in}\) and \(T_\mathsf {out}\) change only local states from \(V_c\). We conclude that for all \(\ell \in {\mathcal L}\), it holds that \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ](\sigma ).{\mathbf {\varvec{\kappa }}}[\ell ] = \sigma '.{\mathbf {\varvec{\kappa }}}[\ell ]\). As the rules in nonsingleton looplets do not change shared variables, \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ](\sigma ).\mathbf {g}= \sigma .\mathbf {g}= \sigma '.\mathbf {g}\). Therefore, \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ](\sigma ) = \sigma '\). \(\square \)
5.3 Representatives for one context and one looplet
We now summarize results from Sects. 5.1 and 5.2, giving the representative of a schedule \(\tau \) in the case when \(\tau \) uses only the rules from one looplet, and does not change its context. If the given looplet consists of a single rule, the construction is given in Sect. 5.1, and otherwise in Sect. 5.2. We show that these constructions indeed give us a schedule of bounded length, that reaches the same state as \(\tau \).
In the following, given a threshold automaton \(\textsf {TA}\) and a looplet c, we will say that a schedule \(\tau =t_1, \dots , t_n\) is contained in c, if \([{t_i.{ rule }}] = c\) for \(1 \le i \le n\).
Theorem 5.1
 (a)
schedule \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) is applicable to \(\sigma \), and \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ](\sigma ) = \tau (\sigma )\),
 (b)
the rule of each transition t in \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) belongs to c, that is, \([{t.{ rule }}] = c\),
 (c)
schedule \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) is not longer than \(2 \cdot c\).
Proof
If \(c=1\), then we use a single accelerated transition or the empty schedule as representative, as described in Lemma 5.1.
If \(c > 1\), we construct the representative as in Sect. 5.2, so that by Lemma 5.8 property (a) follows. For every edge \(e \in E_c\), the rule \(L_c(e)\) belongs to c, and thus \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) satisfies property (b). As \(E_\mathsf {in} \le c\) and \(E_\mathsf {out} \le c\), we conclude that \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ] \le 2 \cdot c\), and thus property c) is also satisfied. From this and Lemma 5.8, we conclude that \(\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) is the required representative schedule. \(\square \)
Theorem 5.1 gives us a way to construct schemas that generate all representatives of the schedules contained in a looplet:
Theorem 5.2
Fix a threshold automaton \(\textsf {TA}\), a context \(\varOmega \), and a looplet c in the slice \({\textsf {TA}}_{\varOmega }\). There exists a schema \(\mathsf {cschema}^{\varOmega }_{c}\) with the following properties:
Fix an arbitrary configuration \(\sigma \) and a steady schedule \(\tau \) that is contained in c and is applicable to \(\sigma \). Let \(\tau '=\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) be the representative schedule of \(\tau \), from Theorem 5.1. Then, \(\textsf {path}(\sigma , \tau ')\) is generated by \(\mathsf {cschema}^{\varOmega }_{c}\). Moreover, the length of \(\mathsf {cschema}^{\varOmega }_{c}\) is at most \(2 \cdot c\).
Proof
Note that \(\tau '=\mathsf {crep}^{\varOmega }_{c}[\sigma , \tau ]\) can be constructed in two different ways depending on the looplet c.
6 Case II: one context and multiple looplets
In this section, we show that for each steady schedule, there exists a representative steady schedule of bounded length that reaches the same final state.
Theorem 6.1
 (a)
\(\mathsf {srep}_{\varOmega }[\sigma ,\tau ]\) is applicable to \(\sigma \), and \(\mathsf {srep}_{\varOmega }[\sigma ,\tau ](\sigma ) = \tau (\sigma )\),
 (b)
\(\mathsf {srep}_{\varOmega }[\sigma ,\tau ] \le 2 \cdot ({{\mathcal R}}_{\varOmega })\)
To construct a representative schedule, we fix a context \(\varOmega \) of a TA, a configuration \(\sigma \) with \(\omega (\sigma ) = \varOmega \), and a steady schedule \(\tau \) applicable to \(\sigma \). The key notion in our construction is a projection of a schedule on a set of looplets:
Definition 6.1
Let \(\tau = t_1, \ldots , t_k\), for \(k>0\), be a schedule, and let C be a set of looplets. Given an increasing sequence of indices \(i(1), \ldots , i(m) \in \{1, \ldots , k \}\), where \(m\le k\), i.e., \(i(j) < i(j+1)\), for \(1 \le j < m\), a schedule \(t_{i(1)} \ldots t_{i(m)}\) is a projection of \(\tau \) on C, if each index \(j \in \{ 1, \ldots , k \}\) belongs to \(\{ i(1), \ldots , i(m) \}\) if and only if \([{t_j.{ rule }}] \in C\).
In fact, each schedule \(\tau \) has a unique projection on a set C. In the following, we write \({\tau }_{c_1,\ldots ,c_m}\) to denote the projection of \(\tau \) on a set \(\{c_1,\ldots ,c_m\}\).
Provided that \(c_1, \ldots , c_m\) are all looplets of the slice \({{\mathcal R}}_{\varOmega }\) ordered with respect to Open image in new window , we construct the following sequences of projections on each looplet (note that \(\pi _0\) is the empty schedule): \(\pi _i = {\tau }_{c_1} \cdot \cdots \cdot {\tau }_{c_i} \text{ for } 0 \le i \le m\).
Example 6.1
Consider the TA shown in Fig. 8. It has three looplets, namely \(c_1 = \{r_1, r_2,r_3,r_4\}\), \(c_2 = \{r_5\}\), \(c_3=\{r_6, r_7, r_8\}\), and the rules are depicted as solid, dotted, and dashed, respectively. These looplets are ordered such that Open image in new window .
Let \(\sigma \) be the configuration represented in Fig. 8 left, i.e. \({\mathbf {\varvec{\kappa }}}[\ell _3]= {\mathbf {\varvec{\kappa }}}[\ell _4] = {\mathbf {\varvec{\kappa }}}[\ell _5]=1\) and \({\mathbf {\varvec{\kappa }}}[\ell _3]={\mathbf {\varvec{\kappa }}}[\ell _4] = {\mathbf {\varvec{\kappa }}}[\ell _5]=0\). Let \(\tau \) be the schedule \((r_4,1),(r_6,1),(r_3,1),\) \((r_4,1),(r_1,1),(r_2,1),(r_7,1),(r_3,1),(r_1,1),(r_5,1), (r_7,1),(r_4,1),(r_8,1),(r_1,1),(r_6,1),\) \((r_7,1),(r_5,1),(r_8,1),(r_7,1)\). Note that \(\tau \) is applicable to \(\sigma \) and that \(\tau (\sigma )\) is the configuration \(\sigma '\) from Fig. 8 right, i.e. \({\mathbf {\varvec{\kappa }}}[\ell _5]=1\), \({\mathbf {\varvec{\kappa }}}[\ell _6]=2\) and \({\mathbf {\varvec{\kappa }}}[\ell _1]={\mathbf {\varvec{\kappa }}}[\ell _2] ={\mathbf {\varvec{\kappa }}}[\ell _3]= {\mathbf {\varvec{\kappa }}}[\ell _4] =0\). We construct the representative schedule \(\mathsf {srep}_{\varOmega }[\sigma ,\tau ]\).
Lemma 6.1
 1.
Schedule \({\tau }_{c_1}\) is applicable to the configuration \(\sigma \).
 2.
Schedule \({\tau }_{c_2, \ldots , c_m}\) is applicable to the configuration \({\tau }_{c_1}(\sigma )\).
 3.
Schedule \({\tau }_{c_1}\cdot \,{\tau }_{c_2, \ldots , c_m}\), when applied to \(\sigma \), results in configuration \(\tau (\sigma )\).
Proof
In the following, we show Points 1–3 onebyone.
There are three cases of why \(t^*\) may be not applicable to \(\tau '(\sigma )\):
(i) There is not enough processes to move: \((\sigma .{\mathbf {\varvec{\kappa }}}+ \varDelta _{\mathbf {\varvec{\kappa }}}(\tau ' \cdot t^*))[\ell ] < 0\). As \(\tau \) is applicable to \(\sigma \), there is a transition t of \(\tau \) with \([{t.{ rule }}] \ne c_1\) and \(t.{ to }= \ell \) as well as \(t.{ factor }> 0\). From this, by definition of Open image in new window , it follows that Open image in new window . This contradicts the lemma’s assumption on the order Open image in new window .
(ii) The condition \(t^*.\varphi ^{\mathrm {rise}}\) is not satisfied, that is, \(\tau '(\sigma ) \not \models t^*.\varphi ^{\mathrm {rise}}\). Then, there is a guard \(\varphi \in \mathsf {guard}(t^*.\varphi ^{\mathrm {rise}})\) with \(\tau '(\sigma ) \not \models \varphi \).
Since \(\tau \) is applicable to \(\sigma \), there is a prefix \(\rho \cdot t\) of \(\tau \), for a schedule \(\rho \) and a transition t that unlocks \(\varphi \) in \(\rho (\sigma )\), that is, \(\rho (\sigma ) \not \models \varphi \) and \(t(\rho (\sigma )) \models \varphi \). Thus, transition t changes the context: \(\omega (\rho (\sigma )) \ne \omega (t(\rho (\sigma )))\). This contradicts the assumption that schedule \(\tau \) is steady.
(iii) The condition \(t^*.\varphi ^{\mathrm {fall}}\) is not satisfied: \(\tau '(\sigma ) \not \models t^*.\varphi ^{\mathrm {fall}}\). Then, there is a guard \(\varphi \in \mathsf {guard}(t^*.\varphi ^{\mathrm {fall}})\) with \(\tau '(\sigma ) \not \models \varphi \).
Let \(\rho \) be the longest prefix of \(\tau \) satisfying \({\rho }_{c_1} = \tau '\). Note that \(\rho \cdot t^*\) is also a prefix of \(\tau \). As \({\rho }_{c_1} = \tau '\) and no transition decrements the shared variables, we conclude that \((\tau '(\sigma )).\mathbf {g}\le (\rho (\sigma )).\mathbf {g}\). From this and from the fact that \(\tau '(\sigma ) \not \models \varphi \), it follows that \(\rho (\sigma ) \not \models \varphi \). Thus transition \(t^*\) is not applicable to \(\rho (\sigma )\). This contradicts the assumption that \(\tau \) is applicable to \(\sigma \).
From (i), (ii), and (iii), we conclude that (1) holds.
Proof of (2) We show that \({\tau }_{c_2, \dots , c_m}\) is applicable to \({\tau }_{c_1}(\sigma )\).
To this end, we fix an arbitrary prefix \(\tau '\) of \(\tau \), a transition t, and a suffix \(\tau ''\), that constitute \(\tau \), that is, \(\tau = \tau ' \cdot t \cdot \tau ''\). We show that if schedule \({\tau '}_{c_2, \dots , c_m}\) is applicable to \({\tau }_{c_1}(\sigma )\), then so is \({(\tau ' \cdot t)}_{c_2, \dots , c_m}\).

\([{t.{ rule }}] = c_1\). This case holds trivially, as \({(\tau ' \cdot t)}_{c_2, \dots , c_m}\) equals to \({\tau '}_{c_2, \dots , c_m}\), which is applicable to \({\tau }_{c_1}(\sigma )\) by assumption.

\([{t.{ rule }}] \ne c_1\). In order to prove that\({(\tau ' \cdot t)}_{c_2, \dots , c_m}\) is applicable to \({\tau }_{c_1}(\sigma )\), we show that counters \(\sigma ''.{\mathbf {\varvec{\kappa }}}\) and shared variables \(\sigma ''.\mathbf {g}\) are large enough, so that transition t is applicable to \(\sigma ''\):
 (i.A)

We will show by contradiction that there is no rule \(r \in c_1\) with \(t.{ to }= r.{ from }\). Let’s assume it exists. Then, on one hand, as \([{t.{ rule }}] \ne c_1\), by definition of Open image in new window , it follows that Open image in new window . On the other hand, as \([{t.{ rule }}] \ne c_1\) and \(c_1, \dots , c_m\) are all classes of the rules used in \(\tau \), it holds that \([{t.{ rule }}] \in \{ c_2, \dots , c_m \}\). By the lemma’s assumption, Open image in new window , and thus, Open image in new window . We arrive at a contradiction.
 (i.B)
 Let’s consider the case of a rule \(r \in c_1\) with \(r.{ to }= t.{ from }\). Assume by contradiction that t is not applicable to \(\sigma ''\), that is, \(\sigma ''.{\mathbf {\varvec{\kappa }}}[t.{ from }] < t.{ factor }\). On one hand, transition t is not applicable to \(\sigma '' = ({\tau }_{c_1} \cdot {\tau '}_{c_2, \dots , c_m})(\sigma )\). Then by the definition of \(\varDelta _{\mathbf {\varvec{\kappa }}}\), it holds that \(\sigma [t.{ from }] + (\varDelta _{\mathbf {\varvec{\kappa }}}({\tau }_{c_1} \cdot {\tau '}_{c_2, \dots , c_m}) + \varDelta _{\mathbf {\varvec{\kappa }}}(t))[t.{ from }] < 0\). By observing that \({\tau }_{ c_1 } = {\tau '}_{ c_1 } + {\tau ''}_{ c_1 }\), we derive the following inequality:On the other hand, schedule \(\tau = \tau ' \cdot t \cdot \tau ''\) is applicable to configuration \(\sigma \). Thus, \(\sigma [t.{ from }] + (\varDelta _{\mathbf {\varvec{\kappa }}}(\tau ') + \varDelta _{\mathbf {\varvec{\kappa }}}(t) + \varDelta _{\mathbf {\varvec{\kappa }}}(\tau ''))[t.{ from }] \ge 0\). By observing that \({\tau }_{ c_1 } = {\tau '}_{ c_1 } + {\tau ''}_{ c_1 }\) and \({\tau }_{c_2, \dots , c_m} = {\tau '}_{c_2, \dots , c_m} + {\tau ''}_{c_2, \dots , c_m}\), we arrive at:$$\begin{aligned}&\sigma [t.{ from }] \nonumber \\&\quad + (\varDelta _{\mathbf {\varvec{\kappa }}}({\tau '}_{c_1}) + \varDelta _{\mathbf {\varvec{\kappa }}}({\tau ''}_{c_1}) + \varDelta _{\mathbf {\varvec{\kappa }}}({\tau '}_{c_2, \dots , c_m}) + \varDelta _{\mathbf {\varvec{\kappa }}}(t))[t.{ from }] < 0 \end{aligned}$$(6.1)By subtracting (6.2) from (6.1), and by commutativity of vector addition, we arrive at \(\varDelta _{\mathbf {\varvec{\kappa }}}({\tau ''}_{c_2, \dots , c_m})[t.{ from }] > 0\). Thus, there is a transition \(t'\) in \({\tau ''}_{c_2, \dots , c_m}\) and a rule \(r' \in c_1\) such that \(t'.{ to }= r'.{ from }\). We again arrived at the contradictory Case (i.A). Hence, transition t must be applicable to configuration \(\sigma ''\).$$\begin{aligned}&\sigma [t.{ from }] + (\varDelta _{\mathbf {\varvec{\kappa }}}({\tau '}_{c_1}) + \varDelta _{\mathbf {\varvec{\kappa }}}({\tau '}_{c_2, \dots , c_m}) \nonumber \\&\quad + \varDelta _{\mathbf {\varvec{\kappa }}}(t) + \varDelta _{\mathbf {\varvec{\kappa }}}({\tau ''}_{c_1}) + \varDelta _{\mathbf {\varvec{\kappa }}}({\tau ''}_{c_2, \dots , c_m}))[t.{ from }] \ge 0 \end{aligned}$$(6.2)
 (i.C)

Otherwise, neither \(t.{ from }\) nor \(t.{ to }\) belong to the set of local states affected by the rules from \(c_1\), i.e., \(\{t.{ from }, t.{ to }\} \cap \{ \ell \mid \exists r \in c_1.\ r.{ from }= \ell \vee r.{ to }= \ell \}\) is empty. Then, schedule \({\tau }_{c_1}\) does not change the counter \({\mathbf {\varvec{\kappa }}}[t.{ from }]\), and \(\varDelta _{\mathbf {\varvec{\kappa }}}(\tau ')[t.{ from }] = \varDelta _{\mathbf {\varvec{\kappa }}}({\tau '}_{c_2, \dots , c_m})[t.{ from }]\). As t is applicable to \(\tau '(\sigma )\), that is, \((\tau '(\sigma )).{\mathbf {\varvec{\kappa }}}[t.{ from }] \ge t.{ factor }\), we conclude that \(\sigma ''.{\mathbf {\varvec{\kappa }}}[t.{ from }] \ge t.{ factor }\).
 If \(\sigma '' \not \models t.\varphi ^{\mathrm {rise}}\).

By definition, the shared variables are never decremented in a nonsingleton looplet. As \(\tau '\) is a prefix of \(\tau \), schedule \({\tau }_{c_1} \cdot {\tau '}_{c_2, \dots , c_m}\) includes all transitions of \(\tau '\). Thus, \(\varDelta _{\mathbf {g}}({\tau }_{c_1} \cdot {\tau '}_{c_2, \dots , c_m}) \ge \varDelta _{\mathbf {g}}(\tau ')\). From this and \(\sigma '' \not \models t.\varphi ^{\mathrm {rise}}\), it follows that \(\tau '(\sigma ) \not \models t.\varphi ^{\mathrm {rise}}\). This contradicts applicability of \(\tau \) to \(\sigma \).
 If \(\sigma '' \not \models t.\varphi ^{\mathrm {fall}}\).

Then, there is a guard \(\varphi \in \mathsf {guard}(t.\varphi ^{\mathrm {fall}})\) with \(\tau ''(\sigma ) \not \models \varphi \). On one hand, \({\tau }_{c_1} \cdot {\tau '}_{c_2, \dots , c_m}\) is applicable to \(\sigma \). On the other hand, \(\tau \) is applicable to \(\sigma \). We notice that \(\varDelta _{\mathbf {g}}(\tau ) = \varDelta _{\mathbf {g}}({\tau }_{c_1}) + \varDelta _{\mathbf {g}}({\tau '}_{c_2,\dots ,c_m}) + \varDelta _{\mathbf {g}}({\tau ''}_{c_2,\dots ,c_m}) + \varDelta _{\mathbf {g}}(t) \ge \varDelta _{\mathbf {g}}({\tau }_{c_1}) + \varDelta _{\mathbf {g}}({\tau '}_{c_2,\dots ,c_m})\). As shared variables are never decreased, it follows that \(({\tau }_{c_1} \cdot {\tau '}_{c_2,\dots ,c_m})(\sigma ) \not \models \varphi \). Thus, \(\omega (\sigma ) \ne \omega (\tau (\sigma ))\). This contradicts the assumption on that schedule \(\tau \) is steady.
Having proved that, we conclude that transition t is applicable to configuration \(({\tau }_{c_1} \cdot {\tau '}_{c_2, \dots , c_m})(\sigma )\). Thus, by induction \(({\tau }_{c_1} \cdot {\tau }_{c_2, \dots , c_m})(\sigma )\) is applicable to \(\sigma \). We conclude that Point 2 of the theorem holds.
We have thus shown all three points of Lemma 6.1. \(\square \)
Proof
(of Theorem 6.1) By iteratively applying Lemma 6.1, we prove by induction that schedule \({\tau }_{c_1} \cdot \ldots \cdot {\tau }_{c_m}\) is applicable to \(\sigma \) and results in \(\tau (\sigma )\). From Theorem 5.1, we conclude that each schedule \({\tau }_{c_i}\) can be replaced by its representative \(\mathsf {crep}^{\varOmega }_{c_i}[\pi _{i1}(\sigma ), {\tau }_{c_i}]\). Thus, \(\mathsf {srep}_{\varOmega }[\sigma ,\tau ]\) is applicable to \(\sigma \) and results in \(\tau (\sigma )\). By Proposition 3.4, schedule \(\mathsf {srep}_{\varOmega }[\sigma ,\tau ]\) is steady, since \(\omega (\sigma ) = \omega (\tau (\sigma ))\). \(\square \)
Finally, we show that for a given context, there is a schema that generates all paths of such representative schedules.
Theorem 6.2
Fix a threshold automaton and a context \(\varOmega \). Let \(c_1, \ldots , c_m\) be the sorted sequence of all looplets of the slice \({{\mathcal R}}_{\varOmega }\), i.e., Open image in new window . Schema \(\mathsf {sschema}_{\varOmega }{} = \mathsf {cschema}^{\varOmega }_{c_1} \circ \cdots \circ \mathsf {cschema}^{\varOmega }_{c_m}\) has two properties: (a) For a configuration \(\sigma \) with \(\omega (\sigma ) = \varOmega \) and a steady schedule \(\tau \) applicable to \(\sigma \), \(\textsf {path}(\sigma , \tau ')\) of the representative \(\tau '=\mathsf {srep}_{\varOmega }[\sigma ,\tau ]\) is generated by \(\mathsf {sschema}_{\varOmega }\); and (b) the length of \(\mathsf {sschema}_{\varOmega }\) is at most \(2\cdot ({{\mathcal R}}_{\varOmega })\).
Proof
Fix a configuration \(\sigma \) with \(\omega (\sigma ) = \varOmega \) and a steady schedule \(\tau \) applicable to \(\sigma \). As \(\mathsf {srep}_{\varOmega }[\sigma ,\tau ]\) is a sorted sequence of the looplet representatives, all paths of \(\mathsf {srep}_{\varOmega }[\sigma ,\tau ]\) are generated by \(\mathsf {sschema}_{\varOmega }\), which is not longer than \(2\cdot ({{\mathcal R}}_{\varOmega })\). \(\square \)
7 Proving the main result
Using the results from Sects. 5 and 6, for each configuration and each schedule (without restrictions) we construct a representative schedule.
Theorem 7.1
 (a)
\(\mathsf {rep}[\sigma ,\tau ]\) is applicable to \(\sigma \), and \(\mathsf {rep}[\sigma ,\tau ](\sigma ) = \tau (\sigma )\),
 (b)
\(\mathsf {rep}[\sigma ,\tau ] \le 2 \cdot {\mathcal R} \cdot (\varPhi ^{\mathrm {rise}} + \varPhi ^{\mathrm {fall}} + 1) + \varPhi ^{\mathrm {rise}} + \varPhi ^{\mathrm {fall}}\).
Proof
Further, given a maximal monotonically increasing sequence z of contexts, we construct a schema that generates all paths of the schedules consistent with z:
Theorem 7.2
For a threshold automaton and a monotonically increasing sequence z of contexts, there exists a schema \(\mathsf {schema}(z)\) that generates all paths of the representative schedules that are consistent with z, and the length of \(\mathsf {schema}(z)\) does not exceed \(3 \cdot {\mathcal R} \cdot (\varPhi ^{\mathrm {rise}} + \varPhi ^{\mathrm {fall}}) + 2 \cdot {\mathcal R}\).
Proof
8 Complete set of schemas and optimizations
Our proofs show that the set of schemas is easily computed from the TA: the threshold guards are syntactic parts of the TA, and enable us to directly construct increasing sequences of contexts. To find a slice of the TA for a given context, we filter the rules with unlocked guards, i.e., check whether the context contains the guard. To produce the simple schema of a looplet, we compute a spanning tree over the slice. To construct simple schemas, we do a topological sort over the looplets. For example, it takes just 30 s to compute the schemas in our longest experiment that runs for 4 h. In our tool we have implemented the following optimizations that lead to simpler and fewer SMT queries.
Entailment optimization We say that a guard \(\varphi _1 \in \varPhi ^{\mathrm {rise}}\) entails a guard \(\varphi _2 \in \varPhi ^{\mathrm {rise}}\), if for all combinations of parameters \(\mathbf {p}\in \mathbf {P}_{RC}\) and shared variables \(\mathbf {g}\in {\mathbb N}_0^{\varGamma }\), it holds that \((\mathbf {g}, \mathbf {p}) \models \varphi _1 \rightarrow \varphi _2\). For instance, in our example, \(\varphi _3 :y \ge (2t + 1)  f\) entails \(\varphi _2 :y \ge (t + 1)  f\). If \(\varphi _1\) entails \(\varphi _2\), then we can omit all monotonically increasing sequences that contain a context \((\varOmega ^\mathrm {rise}, \varOmega ^{\mathrm {fall}})\) with \(\varphi _1 \in \varOmega ^\mathrm {rise}\) and \(\varphi _2 \not \in \varOmega ^\mathrm {rise}\). If the number of schemas before applying this optimization is m! and there are k entailments, then the number of schemas reduces from m! to \((mk)!\). A similar optimization is introduced for the guards from \(\varPhi ^{\mathrm {fall}}\).
Control flow optimization Based on the proof of Lemma 6.1, we introduce the following optimization for TAs that are directed acyclic graphs (possibly with self loops). We say that a rule \(r \in {\mathcal R}\) may unlock a guard \(\varphi \in \varPhi ^{\mathrm {rise}}\), if there is a \(\mathbf {p}\in \mathbf {P}_{RC}\) and \(\mathbf {g}\in {\mathbb N}_0^{{\varGamma }}\) satisfying: \((\mathbf {g}, \mathbf {p}) \models r.\varphi ^{\mathrm {rise}}\wedge r.\varphi ^{\mathrm {fall}}\) (the rule is unlocked); \((\mathbf {g}, \mathbf {p}) \not \models \varphi \) (the guard is locked); \((\mathbf {g}+ r.\mathbf {u}, \mathbf {p}) \models \varphi \) (the guard is now unlocked).
In our example from Fig. 2, the rule \(r_1 : true \mapsto x{\texttt {++}}\) may unlock the guard \(\varphi _1:x \ge \lceil (n+t)/2 \rceil  f\).
Let \(\varphi \in \varPhi ^{\mathrm {rise}}\) be a guard, \(r'_1, \dots , r'_m\) be the rules that use \(\varphi \), and \(r_1, \dots , r_k\) be the rules that may unlock \(\varphi \). If Open image in new window , for \(1 \le i \le k\) and \(1 \le j \le m\), then we exclude some sequences of contexts as follows (we call \(\varphi \) forwardunlockable). Let \(\psi _1, \dots , \psi _n \in \varPhi ^{\mathrm {rise}}\) be the guards of \(r_1, \dots , r_k\). Guard \(\varphi \) cannot be unlocked before \(\psi _1, \dots , \psi _n\), and thus we can omit all sequences of contexts, where \(\varphi \) appears in the contexts before \(\psi _1, \dots , \psi _n\). Moreover, as \(\psi _1, \dots , \psi _n\) are the only guards of the rules unlocking \(\varphi \), we omit the sequences with different combinations of contexts involving \(\varphi \) and the guards from \(\varPhi ^{\mathrm {rise}}{\setminus } \{\varphi , \psi _1, \dots , \psi _n\}\). Finally, as the rules \(r'_1, \dots , r'_m\) appear after the rules \(r_1, \dots , r_k\) in the order Open image in new window , the rules \(r'_1, \dots , r'_m\) appear after the rules \(r_1, \dots , r_k\) in a rule sequence of every schema. Thus, we omit the combinations of the contexts involving \(\varphi \) and \(\psi _1, \dots , \psi _n\).
Hence, we add all forwardunlockable guards to the initial context (we still check the guards of the rules in the SMT encoding in Sect. 9). If the number of schemas before applying this optimization is m! and there are k forwardunlocking guards, then the number of schemas reduces from m! to \((mk)!\). A similar optimization is introduced for the guards from \(\varPhi ^{\mathrm {fall}}\).
9 Checking a schema with SMT
We decompose a schema into a sequence of simple schemas, and encode the simple schemas. Given a simple schema \(S=\{\varOmega _1\}\,r_1, \dots , r_m\,\{\varOmega _2\}\), which contains m rules, we construct an SMT formula such that every model of the formula represents a path from \(\mathcal{L}(S)\) —the language of paths generated by schema S —and for every path in \(\mathcal{L}(S)\) there is a corresponding model of the formula. Thus, we need to model a path of \(m+1\) configurations and m transitions (whose acceleration factors may be 0).
To represent a configuration \(\sigma _i\), for \(0 \le i \le m\), we introduce two vectors of SMT variables: Given the set of local states \({\mathcal L}\) and the set of shared variables \(\varGamma \), a vector \(\mathbf {k}^i = (k^i_1, \dots , k^i_{{\mathcal L}})\) to represent the process counters, a vector \(\mathbf {x}^i = (x^i_1, \dots , x^i_{\varGamma })\) to represent the shared variables. We call the pair \((\mathbf {k}^i, \mathbf {x}^i)\) the layer i, for \(1 \le i \le m\).
Based on this we encode schemas, for which the sequence of rules \(r_1, \dots , r_m\) is fixed. We exploit this in two ways: First, we encode for each layer i the constraints of rule \(r_i\). Second, as this constraint may update only two counters —the processes move from and move to according to the rule —we do not need \({\mathcal L}\) counter variables per layer, but only encode the two counters per layer that have actually changed. As is a common technique in bounded model checking, the counters that are not changed are “reused” from previous layers in our encoding. By doing so, we encode the schema rules with \({\mathcal L} + \varGamma  + m \cdot (2 + \varGamma )\) integer variables, 2m equations, and inequalities in linear integer arithmetic that represent threshold guards that evaluate to true (at most the number of threshold guards times m of these inequalities).
10 Experiments
We have extended our tool ByMC (Byzantine Model Checker [2]) with the technique discussed in this paper. All of our benchmark algorithms were originally published in pseudocode, and we model them in a parametric extension of Promela, which was discussed in [27, 34].
10.1 Benchmarks
We revisited several asynchronous FTDAs that were evaluated in [33, 41]. In addition to these classic FTDAs, we considered asynchronous (Byzantine) consensus algorithms, namely, BOSCO [57], C1CS [10], and CF1S [18], that are designed to work despite partial failure of the distributed system. In contrast to the conference version of this paper [39], we used a new version of the benchmarks from [37] that have been slightly updated for liveness properties. Hence, for some benchmarks, the running times of our tool may vary from [39]. The benchmarks, their source code in parametric of Promela, and the code of the threshold automata are freely available [30].
10.2 Implementation
ByMC supports several tool chains (shown in Fig. 1, p. 3), the first using counter abstraction (that is, process counters over an abstract domain), and the second using counter systems with counters over integers:
 1.
BDD The counter abstraction is checked with nuXmv [11] using Binary Decision Diagrams (BDDs). For safety properties, the tool executes the command check_invar. In our experiments, we used the timeout of 3 days, as there was at least one benchmark that needed a bit more than a day to complete.
 2.
BMC The counter abstraction is checked with nuXmv using bounded model checking [6]. To ensure completeness (at the level of counter abstraction), we explore the computations of the length up to the diameter bounds that were obtained in [41]. To efficiently eliminate shallow spurious counterexamples, we first run the bounded model checker in the incremental mode up to length of 30. This is done by issuing the nuXmv command check_ltlspec_sbmc_inc, which uses the builtin SAT solver MiniSAT. Then, we run a singleshot SAT problem by issuing the nuXmv command gen_ltlspec_sbmc and checking the generated formula with the SAT solver lingeling [5]. In our experiments, we set the timeout to 1 day.
 1.
\({{ PARA}}^{2}\) Bounded model checking with SMT The approach of this article. BYMC enumerates the schemas (as explained in Sect. 4), encodes them in SMT (as explained in Sect. 9) and checks every schema with the SMT solver Z3 [17].
 2.
FAST Acceleration of counter automata In this chain, our tool constructs a threshold automaton and checks the reachability properties with the existing tool FAST [3]. For comparison with our tool, we run FAST with the MONA plugin that produced the best results in our experiments.
Comparing to [39], in this paper, we have introduced an optimization to schema checking that dramatically reduced the running times for some of the benchmarks. In this optimization, we group schemas in a prefix tree, whose nodes are contexts and edges are simple schemas. In each node of the prefix tree, our tool checks, whether there are configurations that are reachable from the initial configurations by following the schemas in the prefix. If there are no such reachable configurations, we can safely prune the whole suffix and thus prove many schemas to be unsatisfiable at once.
10.3 Evaluation
Table 1 summarizes the features of threshold automata that are automatically constructed by ByMC from parametric Promela. The number of local states \({\mathcal L}\) varies from 7 (FRB and STRB) to hundreds (C1CS and CBC). Our threshold automata are obtained by applying interval abstraction to Promela code, which keeps track of the number of messages received by each process. Thus, the number \({\mathcal L}\) is proportional to the number of control states and \(\widehat{D}^k\), where \(\widehat{D}\) is the domain of parametric intervals (discussed above) and k is the number of message types. Sometimes, one can manually construct a more efficient threshold automaton that models the same faulttolerant distributed algorithm and preserves the same safety properties. For instance, Fig. 2 shows a manual abstraction of ABA that has only 5 local states, in contrast to 61 local states in the automatic abstraction (cf. Table 1). We leave open the question of whether one can automatically construct a minimal threshold automaton with respect to given specifications.
The benchmarks used in our experiments. Some benchmarks, e.g., ABA, require us to consider several cases on the parameters, which are mentioned in the column “Case”. The meaning of the other columns is as follows: \({\mathcal L}\) is the number of local states in TA, \({\mathcal R}\) is the number of rules in TA, \(\varPhi ^{\mathrm {rise}}\) and \(\varPhi ^{\mathrm {fall}}\) is the number of (R) and (F)guards respectively. Finally, \(\mathcal{S}\) is the number of enumerated schemas, and Bound is the theoretical upper bound on \(\mathcal{S}\), as given in Theorem 4.2

Summary of our experiments on AMD Opteron®6272, 32 cores, 192 GB. The symbols are: “ Open image in new window ” for timeout (72 h. for BDD and 24 h. otherwise); “ Open image in new window ” for memory overrun of 32 GB; “ Open image in new window ” for BDD nodes overrun; “ Open image in new window ” for timeout in the refinement loop (72 h. for BDD and 24 h. otherwise); “ Open image in new window ” for spurious counterexamples due to counter abstraction

Table 2 summarizes our experiments conducted with the techniques introduced in Sect. 10.2: BDD, BMC, PARA\(^2\), and FAST. On large problems, our new technique works significantly better than BDD and SATbased model checking. BDDbased model checking works very well on top of counter abstraction. Importantly, our new technique does not use abstraction refinement. In comparison to our earlier experiments [39], we verified safety of a larger set of benchmarks with nuXmv. We believe that this is due to the improvements in nuXmv and, probably, slight modifications of the benchmarks from [37].
NBAC and NBACC are challenging as the model checker produces many spurious counterexamples, which are an artifact of counter abstraction losing or adding processes. When using SATbased model checking, the individual calls to nuXmv are fast, but the abstractionrefinement loop times out, due to a large number of refinements (about 500). BDDbased model checking times out when looking for a counterexample. Our new technique, preserves the number of proceses, and thus, there are no spurious counterexamples of this kind. In comparison to the generalpurpose acceleration tool FAST, our tool uses less memory and is faster on the benchmarks where FAST is successful.
As predicted by the distributed algorithms literature, our tool finds counterexamples, when we relax the resilience condition. In contrast to counter abstraction, our new technique gives us concrete values of the parameters and shows how many processes move at each step of the counterexample.
Our new method uses integer counters and thus does not introduce spurious behavior due to counter abstraction, but still has spurious behavior due to data abstraction on complex FTDAs such as BOSCO, C1CS, and NBAC. In these cases, we manually refine the interval domain by adding new symbolic interval borders, see [33]. We believe that these intervals can be obtained directly from threshold automata, and no refinement is necessary. We leave this question to future work.
Sets of schemas and time to check a single schema
When doing experiments, we noticed that the only kinds of guards that cannot be treated by our optimizations and blow up the number of schemas are the guards that use independent shared variables. For instance, consider the guards \(x_0 \ge n  t\) and \(x_1 \ge n  t\) that are counting the number of 0’s and 1’s sent by the correct processes. Even though they are mutually exlusive under the resilience condition \(n > 3t\), our tool has to explore all possible orderings of these guards. We are not aware of a reduction that would prevent our method from exploding in the number of schemas for this example.
Since the schemas can be checked independently, one can check them in parallel. Figure 9 shows a distribution of schemas along with the time needed to check an individual schema. There are only a few divergent schemas that required more than 7 s to get checked, while the large portion of schemas require 1–3 s. Hence, a parallel implementation of the tool should verify the algorithms significantly faster. We leave such a parallel extension for future work.
11 Discussions and related work
We introduced a method to efficiently check reachability properties of FTDAs in a parameterized way. If \(n>7t\) as for BOSCO, even the simplest interesting case with \(t=2\) leads to a system size that is out of range of explicit state model checking. Hence, FTDAs force us to develop parameterized verification methods.
The problem we consider is concerned with parameterized model checking, for which many interesting results exist [14, 15, 21, 22, 23, 35]; cf. [7] for a survey. However, the FTDAs considered by us run under the different assumptions.
From a methodological viewpoint, our approach combines techniques from several areas including compact programs [49], counter abstraction [4, 55], completeness thresholds for bounded model checking [6, 16, 42], partial order reduction [8, 28, 53, 59], and Lipton’s movers [48]. Regarding counter automata, our result entails flattability [46] of every counter system of threshold automata: a complete set of schemas immediately gives us a flat counter automaton. Hence, the accelerationbased semialgorithms [3, 46] should in principle terminate on the systems of TAs, though it did not always happen in our experiments. Similar to our SMT queries based on schemas, the inductive data flow graphs iDFG introduced in [24] are a succinct representations of schedules (they call them traces) for systems where the number of processes (or threads) is fixed. The work presented in [25] then considers parameterized verification. Further, our execution schemas are inspired by a general notion of semilinear path schemas SLPS [45, 46]. We construct a small complete set of schemas and thus a provably small SLPS. Besides, we distinguish counter systems and counter abstraction: the former counts processes as integers, while the latter uses counters over a finite abstract domain, e.g., \(\{0,1, many \}\) [55].
Many distributed algorithms can be represented with I/O Automata [50] or TLA+ [44]. In these frameworks, correctness is typically shown with a proof assistant, while model checking is used as a debugger on small instances. Parameterized model checking is not a concern there, except one notable result [32].
The results presented in this article can be used to check reachability properties of FTDAs. We can thus establish safety of FTDAs. However, for faulttolerant distributed algorithms liveness is as important as safety: The seminal impossibility result by Fischer, Lynch, and Paterson [26] states that a faulttolerant consensus algorithm cannot ensure both safety and liveness in asynchronous systems. In recent work [37] we also considered liveness verification, or more precisely, verification of temporal logic specification with the \({\textsf {G}}\,\) and \({\textsf {F}}\,\) temporal operators. In [37], we use the results of this article as a black box and show that combinations of schemas can be used to generate counterexamples to liveness properties, and that we can verify both safety and liveness by complete SMTbased bounded model checking.
Footnotes
 1.
Our model requires all variables to be nonnegative integers. Although these constraints (e.g., \(x^1 \ge 0\)) have to be encoded in the SMT queries, we omit these constraints here for a more concise presentation.
Notes
Acknowledgements
Open access funding provided by Austrian Science Fund (FWF). We are grateful to Azadeh Farzan for valuable discussions during her stay in Vienna and to the anonymous reviewers for their insightful comments regarding partial order reduction, and for suggestions that helped us in improving the presentation of the paper.
References
 1.Attiya H, Welch J (2004) Distributed computing, 2nd edn. Wiley, New YorkCrossRefGoogle Scholar
 2.ByMC: Byzantine model checker (2013). http://forsyte.tuwien.ac.at/software/bymc/. Accessed Dec 2016
 3.Bardin S, Finkel A, Leroux J, Petrucci L (2008) Fast: acceleration from theory to practice. STTT 10(5):401–424CrossRefGoogle Scholar
 4.Basler G, Mazzucchi M, Wahl T, Kroening D (2009) Symbolic counter abstraction for concurrent software. In: CAV. LNCS, vol 5643, pp 64–78Google Scholar
 5.Biere A (2013) Lingeling, Plingeling and Treengeling entering the SAT competition 2013. In: Proceedings of SAT competition 2013; Solver and p. 51Google Scholar
 6.Biere A, Cimatti A, Clarke EM, Zhu Y (1999) Symbolic model checking without BDDs. In: TACAS. LNCS, vol 1579, pp 193–207Google Scholar
 7.Bloem R, Jacobs S, Khalimov A, Konnov I, Rubin S, Veith H, Widder J (2015) Decidability of parameterized verification, synthesis lectures on distributed computing theory. Morgan & Claypool, San RafaelGoogle Scholar
 8.Bokor P, Kinder J, Serafini M, Suri N (2011) Efficient model checking of faulttolerant distributed protocols. In: DSN, pp 73–84Google Scholar
 9.Bracha G, Toueg S (1985) Asynchronous consensus and broadcast protocols. J ACM 32(4):824–840CrossRefMATHMathSciNetGoogle Scholar
 10.Brasileiro FV, Greve F, Mostéfaoui A, Raynal M (2001) Consensus in one communication step. In: PaCT. LNCS, vol 2127, pp 42–50Google Scholar
 11.Cavada R, Cimatti A, Dorigatti M, Griggio A, Mariotti A, Micheli A, Mover S, Roveri M, Tonetta S (2014) The nuXmv symbolic model checker. In: CAV. LNCS, vol 8559, pp 334–342Google Scholar
 12.Chandra TD, Toueg S (1996) Unreliable failure detectors for reliable distributed systems. J ACM 43(2):225–267CrossRefMATHMathSciNetGoogle Scholar
 13.Clarke E, Grumberg O, Jha S, Lu Y, Veith H (2003) Counterexampleguided abstraction refinement for symbolic model checking. J ACM 50(5):752–794CrossRefMATHMathSciNetGoogle Scholar
 14.Clarke E, Talupur M, Touili T, Veith H (2004) Verification by network decomposition. In: CONCUR 2004, vol 3170, pp 276–291Google Scholar
 15.Clarke E, Talupur M, Veith H (2008) Proving Ptolemy right: the environment abstraction framework for model checking concurrent systems. In: TACAS’08/ETAPS’08. Springer, Berlin, pp 33–47Google Scholar
 16.Clarke EM, Kroening D, Ouaknine J, Strichman O (2004) Completeness and complexity of bounded model checking. In: VMCAI. LNCS, vol 2937, pp 85–96Google Scholar
 17.De Moura L, Bjørner N (2008) Z3: an efficient SMT solver. In: Tools and algorithms for the construction and analysis of systems. LNCS, vol 1579, pp 337–340Google Scholar
 18.Dobre D, Suri N (2006) Onestep consensus with zerodegradation. In: DSN, pp 137–146Google Scholar
 19.Drăgoi C, Henzinger TA, Zufferey D (2016) PSync: a partially synchronous language for faulttolerant distributed algorithms. In: POPL, pp 400–415Google Scholar
 20.Drăgoi C, Henzinger TA, Veith H, Widder J, Zufferey D (2014) A logicbased framework for verifying consensus algorithms. In: VMCAI. LNCS, vol 8318, pp 161–181Google Scholar
 21.Emerson E, Namjoshi K (1995) Reasoning about rings. In: POPL, pp 85–94Google Scholar
 22.Emerson EA, Kahlon V (2003) Model checking guarded protocols. In: LICS. IEEE, pp 361–370Google Scholar
 23.Esparza J, Ganty P, Majumdar R (2013) Parameterized verification of asynchronous sharedmemory systems. In: CAV, pp 124–140Google Scholar
 24.Farzan A, Kincaid Z, Podelski A (2013) Inductive data flow graphs. In: POPL, pp 129–142Google Scholar
 25.Farzan A, Kincaid Z, Podelski A (2015) Proof spaces for unbounded parallelism. In: POPL, pp 407–420Google Scholar
 26.Fischer MJ, Lynch NA, Paterson MS (1985) Impossibility of distributed consensus with one faulty process. J ACM 32(2):374–382CrossRefMATHMathSciNetGoogle Scholar
 27.Gmeiner A, Konnov I, Schmid U, Veith H, Widder J (2014) Tutorial on parameterized model checking of faulttolerant distributed algorithms. In: SFM. LNCS, vol 8483. Springer, Berlin, pp 122–171Google Scholar
 28.Godefroid P (1990) Using partial orders to improve automatic verification methods. In: CAV. LNCS, vol 531, pp 176–185Google Scholar
 29.Guerraoui R (2002) Nonblocking atomic commit in asynchronous distributed systems with failure detectors. Distrib Comput 15(1):17–25CrossRefGoogle Scholar
 30.
 31.Hawblitzel C, Howell J, Kapritsos M, Lorch JR, Parno B, Roberts ML, Setty STV, Zill B (2015) Ironfleet: proving practical distributed systems correct. In: SOSP, pp 1–17Google Scholar
 32.Jensen H, Lynch N (1998) A proof of Burns nprocess mutual exclusion algorithm using abstraction. In: Steffen B (ed) TACAS. LNCS, vol 1384. Springer, Berlin, pp 409–423Google Scholar
 33.John A, Konnov I, Schmid U, Veith H, Widder J (2013) Parameterized model checking of faulttolerant distributed algorithms by abstraction. In: FMCAD, pp 201–209Google Scholar
 34.John A, Konnov I, Schmid U, Veith H, Widder J (2013) Towards modeling and model checking faulttolerant distributed algorithms. In: SPIN. LNCS, vol 7976, pp 209–226Google Scholar
 35.Kaiser A, Kroening D, Wahl T (2012) Efficient coverability analysis by proof minimization. In: CONCUR, pp 500–515Google Scholar
 36.Kesten Y, Pnueli A (2000) Control and data abstraction: the cornerstones of practical formal verification. STTT 2:328–342CrossRefMATHGoogle Scholar
 37.Konnov I, Lazić M, Veith H, Widder J (2017) A short counterexample property for safety and liveness verification of faulttolerant distributed algorithms. In: POPL, pp 719–734Google Scholar
 38.Konnov I, Veith H, Widder J (2014) On the completeness of bounded model checking for thresholdbased distributed algorithms: reachability. In: CONCUR. LNCS, vol 8704, pp 125–140Google Scholar
 39.Konnov I, Veith H, Widder J (2015) SMT and POR beat counter abstraction: parameterized model checking of thresholdbased distributed algorithms. In: CAV (Part I). LNCS, vol 9206, pp 85–102Google Scholar
 40.Konnov I, Veith H, Widder J (2016) What you always wanted to know about model checking of faulttolerant distributed algorithms. In: PSI 2015, revised selected papers. LNCS, vol 9609. Springer, pp 6–21Google Scholar
 41.Konnov I, Veith H, Widder J (2017) On the completeness of bounded model checking for thresholdbased distributed algorithms: reachability. Inf Comput 252:95–109CrossRefMATHMathSciNetGoogle Scholar
 42.Kroening D, Strichman O (2003) Efficient computation of recurrence diameters. In: VMCAI. LNCS, vol 2575, pp 298–309Google Scholar
 43.Lamport L (1978) Time, clocks, and the ordering of events in a distributed system. Commun ACM 21(7):558–565CrossRefMATHGoogle Scholar
 44.Lamport L (2002) Specifying systems: the TLA+ language and tools for hardware and software engineers. AddisonWesley Longman Publishing Co. Inc, BostonGoogle Scholar
 45.Leroux J, Sutre G (2004) On flatness for 2dimensional vector addition systems with states. In: CONCUR 2004concurrency theory. Springer, pp 402–416Google Scholar
 46.Leroux J, Sutre G (2005) Flat counter automata almost everywhere! In: ATVA. LNCS, vol 3707, pp 489–503Google Scholar
 47.Lesani M, Bell CJ, Chlipala A (2016) Chapar: certified causally consistent distributed keyvalue stores. In: POPL, pp 357–370Google Scholar
 48.Lipton RJ (1975) Reduction: a method of proving properties of parallel programs. Commun ACM 18(12):717–721CrossRefMATHMathSciNetGoogle Scholar
 49.Lubachevsky BD (1984) An approach to automating the verification of compact parallel coordination programs. I. Acta Inform 21(2):125–169CrossRefMATHMathSciNetGoogle Scholar
 50.Lynch N (1996) Distributed algorithms. Morgan Kaufman, BurlingtonMATHGoogle Scholar
 51.Mostéfaoui A, Mourgaya E, Parvédy PR, Raynal M (2003) Evaluating the conditionbased approach to solve consensus. In: DSN, pp 541–550Google Scholar
 52.Padon O, McMillan KL, Panda A, Sagiv M, Shoham S (2016) Ivy: safety verification by interactive generalization. In: PLDI, pp 614–630Google Scholar
 53.Peled D (1993) All from one, one for all: on model checking using representatives. In: CAV. LNCS, vol 697, pp 409–423Google Scholar
 54.Peluso S, Turcu A, Palmieri R, Losa G, Ravindran B (2016) Making fast consensus generally faster. In: DSN, pp 156–167Google Scholar
 55.Pnueli A, Xu J, Zuck L (2002) Liveness with (0,1,$\infty $)counter abstraction. In: CAV. LNCS, vol 2404, pp 93–111Google Scholar
 56.Raynal M (1997) A case study of agreement problems in distributed systems: nonblocking atomic commitment. In: HASE, pp 209–214Google Scholar
 57.Song YJ, van Renesse R (2008) Bosco: onestep Byzantine asynchronous consensus. In: DISC. LNCS, vol 5218, pp 438–450Google Scholar
 58.Srikanth T, Toueg S (1987) Simulating authenticated broadcasts to derive simple faulttolerant algorithms. Distrib Comput 2:80–94CrossRefGoogle Scholar
 59.Valmari A (1991) Stubborn sets for reduced state space generation. In: Advances in Petri Nets 1990. LNCS, vol 483. Springer, pp 491–515Google Scholar
 60.Wilcox JR, Woos D, Panchekha P, Tatlock Z, Wang X, Ernst MD, Anderson TE (2015) Verdi: a framework for implementing and formally verifying distributed systems. In: PLDI, pp 357–368Google Scholar
Copyright information
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.