Mass Customization: Reflections on the State of the Concept

Article

Abstract

The opportunities of mass customization are acknowledged as fundamentally positive by theoretical and empirical studies for many years. Many companies are already operating on this new business model successfully. But most of them are rather small start-ups which utilize the novelty effect of mass customization to enter mature markets. Large scale mass customization operations are still limited to a few examples. The objective of this paper is to analyze the recent state of mass customization practice by answering four basic questions which are frequently raised by managers and scholars when talking about the challenges of this approach: Do customers need customized products? If yes, what prevents them from purchasing these offerings? Do we have the enabling technologies for mass customization? And why do many firms fail during and after the introduction of mass customization? To answer these questions, this paper develops twelve propositions. These refer to terminological problems, a shortage of reliable information about the real demand for customized products in various markets, the state of implementation of configuration technologies, lack of management knowledge about organizational and strategic capabilities of mass customization operations, and the demand for sincere change management activities. These issues may explain why the present state of practical implementation of mass customization lacks behind the description and discussion of the phenomenon in the management literature.

Key words

mass customization personalization customer co-design configuration review 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Ahlström, P. and Westbrook, R., “Implications of Mass Customization for Operations Management: An Exploratory Survey,” International Journal of Operations and Production Management, Vol. 19, No. 3, pp. 262–274 (1993).Google Scholar
  2. Anderson, W. Thomas Jr., “Convenience Orientation and Consumption Behavior,” Journal of Retailing, Vol. 48, No. 3, pp. 49–71 (1972).Google Scholar
  3. Babin, B. J., Darden, W. R., and Griffin M., “Work and/or Fun: Measuring Hedonic and Utilitarian Shopping Value,” Journal of Consumer Research, Vol. 20, No. 4, pp. 644–656 (1994).CrossRefGoogle Scholar
  4. Baker, J., Parasuraman, A., Grewal, D., and Voss, G. B., “The Influence of Multiple Store Environment Cues on Perceived Merchandise Value and Patronage Intentions,” Journal of Marketing, Vol. 66, No. 2, pp. 120–141 (2002).CrossRefGoogle Scholar
  5. Bateson, J., “Self Service Consumer: An Exploratory Study,” Journal of Retailing, Vol. 61, No. 3, pp. 49–76 (1985).Google Scholar
  6. Bendapudi, N. and Leone, R., “Psychological Implications of Customer Participation in Co-production,” Journal of Marketing, Vol. 67, No. 1, pp. 14–28 (2003).CrossRefGoogle Scholar
  7. Berger, C., Moeslein, K., Piller, Frank, and Reichwald, R., “Co-designing the Customer Interface for Customer-Centric Strategies: Learning from Exploratory Research,” European Management Review, Vol. 2, No. 1, pp. 70–87 (2005).CrossRefGoogle Scholar
  8. Bitner, M. J., Brown, S. W., and Meuter, M.,”Technology Infusion in Service Encounters,” Journal of the Academy of Marketing Science, Vol. 28, No. 1, pp. 138–149 (2002).Google Scholar
  9. Blaho, R., “Massenindividualisierung: Erstellung integrativer Leistungen auf Massenmärkten,” Dissertation thesis, University of St. Gallen (2001).Google Scholar
  10. Boer, C. and Dulio, S., “Mass Customization in the Footwear Industry: The EuroShoE Project,” In Proceedings of the 2003 World Congress on Mass Customization and Personalization (MCPC 2003), Munich (October 2003).Google Scholar
  11. Broekhuizen, T. L. J. and Alsem, K. J., “Success Factors For Mass Customization: A Conceptual Model,” Journal of Market-Focused Management, Vol. 5, No. 4, pp. 309–330 (2002).Google Scholar
  12. Brown, S. and Bessant, J., “The Manufacturing Strategy-Capabilities Links in Mass Customization and Agile Manufacturing - An Exploratory Study,” International Journal of Productions and Operations Management, Vol. 23, No. 7, pp. 707–730 (2003).Google Scholar
  13. Chamberlin, E. H., “Product Heterogeneity and Public Policy,” American Economic Review, Vol. 40, No. 2, pp. 85–92 (1950).Google Scholar
  14. Chamberlin, E. H., The Theory of Monopolistic Competition: A Re-Orientation of Value Theory, 8th edition, Harvard University Press, Cambridge, MA (1962).Google Scholar
  15. Csikszentmihalyi, M., Flow: the Psychology of Optimal Experience, Harper and Row, New York (1990).Google Scholar
  16. Davis, S., “Future Perfect,” Reading (1987).Google Scholar
  17. De Meyer, A., Dutta, S., and Srivastava, S., The Bright Stuff: How Innovative People and Technology can make the Old Economy New, Prentice Hall, London (2002).Google Scholar
  18. Dellaert, B. and Syam, N., “Consumer-Product Interaction: A Strategic Analysis of the Market for Customized Products,” Review of Marketing Science, Working Paper No. 1, Berkeley Electronic Press (2002).Google Scholar
  19. Dellaert, B. G. C. and Stremersch, S., “Marketing Mass Customized Products: Striking the Balance between Utility and Complexity,” Journal of Marketing Research, Vol. 43, No. 2 (May 2005).Google Scholar
  20. Donoghue, K., Built for Use: Driving Profitability through the User Experience, McGraw-Hill, New York (2002).Google Scholar
  21. Duray, R., “Mass Customization Origins: Mass or Custom Manufacturing?” International Journal of Operations and Production Management, Vol. 22, No. 3, pp. 314–330 (2002).CrossRefGoogle Scholar
  22. Duray, R. et al., “Approaches to Mass Customization: Configurations and Empirical Validation,” Journal of Operations Managements, Vol. 18, pp. 605–625 (2000).Google Scholar
  23. Ettenberg, E., The Next Economy: Will You Know Where Your Customers Are? McGraw-Hill, New York (2002).Google Scholar
  24. EuroShoE, C., “The Market for Customized Footwear in Europe: Market Demand and Consumer Preferences,” EuroShoe Project Report, Frank T. Piller (Ed.), Munich and Milan (2002) (available online at www.euro-shoe.net).Google Scholar
  25. Evans, P. F., “Online Configurators: Consumer Usage and Return on Investment Potential,” Jupiter Research Report No. RET05-C03, Jupiter Research, New York, NY (2005).Google Scholar
  26. Fogliatto, F. S., Da Silveira, G., and Royer, R., “Flexibility-Driven Index for Measuring Mass Customization Feasibility on Industrialized Products,” International Journal of Production Research, Vol. 41, No. 8, pp. 1811–1829 (2003).CrossRefMATHGoogle Scholar
  27. Frank P., “Customer Interaction and Digitizability—a Structural Approach,” in Moving Towards Mass Customization: Information Systems and Management Principles, C. Rautenstrauch et al. (Eds.), Springer, Berlin/New York, pp. 119–138 (2002).Google Scholar
  28. Franke, N. and Piller, F., “Key Research Issues in User Interaction with Configuration Toolkits in a Mass Customization System,” International Journal of Technology Management, Vol. 26, pp. 578–599 (2003).Google Scholar
  29. Franke, N. and Piller, F., “Toolkits for User Innovation and Design: An Exploration of User Interaction and Value Creation,” Journal of Product Innovation Management, Vol. 21, No. 6, pp. 401–415 (2004).CrossRefGoogle Scholar
  30. Franke, N. and Reisinger, H., “Remaining Within-Cluster Variance: A Meta-Analysis of the Dark Side of Cluster Analysis,” Working Paper, Vienna University of Economics and Business Administration (2003).Google Scholar
  31. Franke, N. and Schreier, M., “Entrepreneurial Opportunities with Toolkits for User Innovation and Design,” International Journal on Media Management, Vol. 4, No. 4, pp. 225–234 (2002).Google Scholar
  32. Franke, N. and von Hippel, E., “Satisfying Heterogeneous User Needs via Innovation Toolkits: The Case of Apache Security Software,” Research Policy, Vol. 32, No. 7, pp. 1199–1215 (2003).CrossRefGoogle Scholar
  33. Frazier, C., “Swap Meet: Consumers are Willing to Exchange Personal Information for Personalized Products,” American Demographics, Vol. 23, No. 7, pp. 51–55 (2001).Google Scholar
  34. Fulkerson, B. and Shank, M., “The New Economy Electronic Commerce - and the Rise of Mass Customization,” in Handbook on Electronic Commerce, Michael Shaw et al. (Eds.), Springer, Berlin, pp. 411–430 (2000).Google Scholar
  35. Füller, J., Bartl, M., Ernst, H., and Mühlbacher, H., “Community Based Innovation: A Method to Utilize the Innovative Potential of Online Communities,” In Proceedings of the 37th Hawaii International Conference on System Sciences, IEEE, Kona, HA (2004).Google Scholar
  36. Gouthier, M., “Kundenentwicklung im Dienstleistungsbereich“, Wiesbaden: Gabler and DUV (2003).Google Scholar
  37. Gummesson, E., Total Relationship Marketing, 2nd edition, Butterworth-Heineworth, Oxford (2002).Google Scholar
  38. Hart, C., “Mass Customization: Conceptual Underpinnings, Opportunities and Limits,” International Journal of Service Industry, Vol. 6, No. 2, pp. 36–45 (1995).Google Scholar
  39. Heil, G., Parker, T., and Stephens, D. C., One Size Fits One: Building Relationships One Customer and One Employee at a Time, Wiley, New York and Chichester (1999).Google Scholar
  40. Henkel, J. and von Hippel, E., “Welfare Implications of User Innovation,” MIT Sloan School of Management, Working Paper, Cambridge, MA, (2003).Google Scholar
  41. Hill, K., “Customers love&hate Customization,” Online ezine CRM Daily.com, www.crm-daily.newsfactor. comandstory.xhtml?story_id = 21239 (April 10, 2003).Google Scholar
  42. Huff, A. S. and Möslein, K., “An Agenda for Understanding Individual Leadership in Corporate Leadership Systems,” in Leadership and Management in the 21st century, C.L. Cooper (Ed.), Oxford University Press, Oxford, pp. 248–270 (2004).Google Scholar
  43. Huffman, C. and Kahn, B., “Variety for Sale: Mass Customization or Mass Confusion,” Journal of Retailing, Vol. 74, No. 4, pp. 491–513 (1998).CrossRefGoogle Scholar
  44. Jaeger, S., “Der Markt für individualisierte Lebensmittelprodukte,” Dissertation, TUM Business School, Technische Universität München (2004).Google Scholar
  45. Kamali, N. and Loker, S., “Mass Customization: On-line Consumer Involvement in Product Design,” Journal of Computer-Mediated Communication, Vol. 7, No. 4 (2002) (July).Google Scholar
  46. Khalid, H. M. and Helander, M. G., “Web-Based Do-It-Yourself Product Design,” in The Customer Centric Enterprise: Advances in Mass Customization and Personalization, Mitchell Tseng and Frank Piller (Eds.), Springer, New York and Berlin, pp. 247–266 (2003).Google Scholar
  47. Kieserling, C., “Mass Customization in the Shoe Industry,” Survey conducted by Selve AG, Munich (1999).Google Scholar
  48. Kotha, S., “Mass Customization: Implementing the Emerging Paradigm for Competitive Advantage,” Strategic Management Journal, Vol. 16, Special Issue, pp. 21–42 (1995).Google Scholar
  49. Lakhani, K. and Wolf, R., “Why Hackers do What They Do: Understanding Motivation and Effort in FreeandOpen Source Projects,” in Perspectives on Free and Open Source Software, J. Feller, B. Fitzgerald, S. Hissam, and K. R. Lakhani (Eds.), MIT Press, Cambridge, MA (2005).Google Scholar
  50. Lancaster, K. J., “A New Approach to Consumer Theory,” Journal of Political Economy, Vol. 74, pp. 132–157 (1966).Google Scholar
  51. Lawrence, P. R. and Lorsch, J. W., Organization and Environment: Managing Differentiation and Integration, Harvard University Press, Boston MA (1967).Google Scholar
  52. Lee, C.-H. S., Barua, A., and Whinston, A., “The Complementarity of Mass Customization and Electronic Commerce,” Economics of Innovation and New Technology, Vol. 9, No. 2, pp. 81–110 (2000).Google Scholar
  53. Levin, I. P., Schreiber, J., Lauriola, M., and Gaeth, G. J., “A Tale of Two Pizzas: Building Up from a Basic Product Versus Scaling Down from a Fully-loaded Product,” Marketing Letters, Vol. 13, No. 4, pp. 335–344 (2002).CrossRefGoogle Scholar
  54. MacCarthy, B., Brabazon, P. G., and Bramham, J., “Fundamental Modes of Operation for Mass Customization,” International Journal of Production Economics, Vol. 85, No. 3, pp. 289–308 (2003).CrossRefGoogle Scholar
  55. Maes, P., “Agents that Reduce Work and Information Overload,” Communications of the ACM, Vol. 37, No. 7, pp. 31–40, 146 (1994).Google Scholar
  56. Miller, G. A., “The Magic Number Seven, Plus or Minus Two: Some Limits on our Capacity for Processing Information,” Psychological Review, Vol. 63, No. 2, pp. 81–97 (1956).Google Scholar
  57. Nail, P., “Toward an Integration of some Models and Theories of Social Response,” Psychological Bulletin, Vol. 100, pp. 190–206 (1986).Google Scholar
  58. Neumann, J. von, “Can We Survive Technology ?,” Fortune, Vol. 91, No. 6, p. 106 (1955).Google Scholar
  59. Novak, T., Hoffmann, D., and Yung, Y.-F., “Measuring the Customer Experience in Online Environments: A Structural Modeling Approach,” Marketing Science, Vol. 19, No. 1, pp. 22–42 (Winter 2000).Google Scholar
  60. Piller, F. and Ihl, C., “Mass Customization ohne Mythos,” New Management, Vol. 71, No. 10, pp. 16–30 (2002).Google Scholar
  61. Piller, F. and Müller, M., “A Marketing Approach for Mass Customization,” International Journal of Computer Integrated Manufacturing, Vol. 17, No. 7, pp. 583–593 (October 2004) .Google Scholar
  62. Piller, F. (2003a), Mass Customization, 3rd edition, Gabler, Wiesbaden (2003).Google Scholar
  63. Piller, F., “What is Mass Customization? A Focused View on the Term,” Mass Customization News, Vol. 6, No. 1, pp. 2–4 (2003).Google Scholar
  64. Piller, F., Innovation and Value Co-Creation, IIMCP Press, Hong Kong and Munich (2005).Google Scholar
  65. Piller, F., Hönigschmid, F., and Müller, F., “Individuality and Price: An Exploratory Study on Consumers' Willingness to Pay for Customized Products,” TUM Business School, Department for General and Industrial Management, Working Paper No. 28, Munich (2002).Google Scholar
  66. Piller, F., Möslein, K., and Stotko, C., Does Mass Customization Pay? An Economic Approach to Evaluate Customer Integration,” Production Planning and Control, Vol. 15, No. 4, pp. 435–444 (2004).Google Scholar
  67. Piller, F., Schubert, P., Koch, M., and Moeslein, K., Overcoming Mass Confusion: Collaborative Customer Co-design in Online Communities,” Journal of Computer-Mediated Communication, Vol. 10, No. 4, article 8 (online journal, http://jcmc.indiana.edu/vol10/issue4/piller.html).
  68. Pine, B. J., Planning Review, Vol. 21, No. 5, pp. 23–25 (1993).Google Scholar
  69. Pine, B. J., “Challenges to Total Quality Management in Manufacturing,” in The Quality Yearbook, James W. Cortada and John A. Woods (Eds.), New York pp. 69–75 (1995).Google Scholar
  70. Pine, B. J. II, Mass Customization, Harvard Business School Press, Boston (1993).Google Scholar
  71. Pine, B. J. II, Victor, B., and Boynton, A. C., “Making Mass Customization Work,” Harvard Business Review, Vol. 71, No. 5, pp. 108–119 (1993).Google Scholar
  72. Pine, B. J., Peppers, D., and Rogers, M., “Do You Want to Keep Your Customers Forever?” Harvard Business Review, Vol. 73, No. 2, pp. 103–114 (1995).Google Scholar
  73. Prahalad, C. K. and Bettis, R. A., “The Dominant Logic: A New Linkage between Diversity and Performance,” Strategic Management Journal, Vol. 7, No. 6, pp. 485–501 (1986).Google Scholar
  74. Prahalad, C. K. and Ramaswamy, V., The Future of Competition: Co-creating Unique Value with Customers, Harvard Business School Press, Boston, MA (2004).Google Scholar
  75. Prandelli, E., Verona, G., and Raccagni, D., Web-based Product Innovation: To What Extent do Companies Actually Import Customer Knowledge? Bocconi University, Milano (2004).Google Scholar
  76. Ramirez, R., “Value Co-production: Intellectual Origins and Implications for Practice and Research,” Strategic Management Journal, Vol. 20, No. 1, pp. 49–65 (1999).Google Scholar
  77. Randall, T., Terwiesch, C., and Ulrich, K. T., User Design of Customized Products, Working Paper, Wharton Business School (2005).Google Scholar
  78. Rangaswamy, A. and Pal, N., “Gaining Business Value from Personalization Technologies,” in The Power of One: Gaining Business Value from Personalization Technologies, Nirmal Pal and Arvind Rangaswamy (Eds.), Trafford Publishing, Victoria, pp. 1–9 (2003).Google Scholar
  79. Reichwald, R., Piller, F. T., and Möslein, K., “Information as a Critical Success Factor for Mass Customization, Or: Why Even a Customized Shoe Not Always Fits,” In Proceedings of the ASAC-IFSAM 2000 Conference (Marketing Track), Montreal, Quebec, Canada, pp. 9–12 (July 2000).Google Scholar
  80. Reichwald, R., Müller, M., and Piller, F., Satisfaction of Customer Co-designers: Process versus Product Satisfaction,” In Proceedings of the 34th Conference of the European Marketing Academy (EMAC 2005), Milan, pp. 24–27 (2005).Google Scholar
  81. Salvador, F., Rungtusanatham, M. J., and Forza, C., “Supply-chain Configurations for Mass Customization,” Production Planning and Control, Vol. 15, No. 4, pp. 380–402 (2004).Google Scholar
  82. Schreier, M., “Value Creation with Toolkits for User Innovation and Design,” Working Paper, revised edition, Department for Entrepreneurship, Wirtschaftsuniversität Wien, Vienna (2004).Google Scholar
  83. Sheth, J. N. and Parvatiyar, A., “Evolving Relationship Marketing into a Discipline,” Journal of Relationship Marketing, Vol. 1, No. 2, (Charter issue) pp. 3–16 (2001).Google Scholar
  84. Simon, H. A., Administrative Behavior: A Study of Decision Making Processes in Administrative Organizations, Free Press, New York (1976).Google Scholar
  85. Simonson, I., “Determinants of Customers' Responses to Customized Offers: Conceptual Framework and Research Propositions,” Journal of Marketing, Vol. 69, No. 1, pp. 32–45 (2005).CrossRefGoogle Scholar
  86. Squire, B., Readman, J., Brown, S., and Bessant, J., “Mass Customization: The Key to Customer Value?” Production Planning and Control, Vol. 15, No. 4, pp. 459–471 (2004).Google Scholar
  87. Stone, R. N. and Gronhaug, K., “Perceived Risk: Further Considerations for the Marketing Discipline,” European Journal of Marketing, Vol. 27, No. 3, pp. 39–50 (1993).CrossRefGoogle Scholar
  88. Stump, R. and Athaide, G., and Joshi, A. W., “Managing Seller-Buyer New Product Development Relationships for Customized Products: A Contingency Model based on Transaction Cost Analysis and Empirical Test,” Journal of Product Innovation Management, Vol. 19, No. 6, pp. 439–454 (2002).CrossRefGoogle Scholar
  89. Tepper, K., Bearden, W. O., and Hunter, G. L., “Consumers' Need for Uniqueness: Scale Development and Validation,” Journal of Consumer Research, Vol. 28, No. 1, pp. 50–66 (2001).Google Scholar
  90. Terwiesch, C. and Loch, C. H., “Collaborative Prototyping and the Pricing of Custom Designed Products,” Management Science, Vol. 50, No. 2, pp. 145–158 (2004).CrossRefGoogle Scholar
  91. Thoben, K. -D.,“Customer Driven Manufacturing Versus Mass Customization: Comparing System Design Principles for Mass Customization and Customer Driven Manufacturing,” Mitchell Tseng and Frank Piller (Eds.), The Customer Centric Enterprise: Advances in Mass Customization and Personalization, Springer, New York and Berlin, pp. 71–84 (2003).Google Scholar
  92. Toffler, A., Future Shock, Random House, New York (1970).Google Scholar
  93. Toffler, A., The Third Wave, Bantam Books, New York (1980).Google Scholar
  94. Tseng, M. and Du, X., “Design by Customers of Mass Customization Products,” Annals of the CIRP, Vol. 47, pp. 103–106 (1998).Google Scholar
  95. Tseng, M. and Jiao, J., “Mass Customization,” Handbook of Industrial Engineering, Gaviel Salvendy (Ed.), 3rd edition, Wiley, New York (2001).Google Scholar
  96. Tseng, M., Kjellberg, T., and Lu, S., “Design in the New E-Commerce Era,” Annals of the CIRP, Vol. 52, No. 2, pp. 509–519 (2003).Google Scholar
  97. Tseng, M. M., “Are You Ready to Serve Creative Customers?” Supply Chain Connection - Stanford Supply Chain Forum, pp. 4–5 (Spring 2002).Google Scholar
  98. Victor, B. and Boynton, A. C., Invented Here, Harvard Business School Press, Boston (1998).Google Scholar
  99. von Hippel, E., “Sticky Information and the Locus of Problem Solving,” Management Science, Vol. 40, No. 4, pp. 429–439 (1994).Google Scholar
  100. von Hippel, E., “Economics of Product Development by Users: The Impact of 'Sticky’ Local Information,” Management Science, Vol. 44, No. 5, pp. 629–644 (1998).MATHGoogle Scholar
  101. von Hippel, E., “Perspective: User Toolkits for Innovation,” Journal of Product Innovation Management, Vol. 18, No. 4, pp. 247–257 (2001).CrossRefGoogle Scholar
  102. Wayland, R. E. and Cole, P. M., Customer Connections: New Strategies for Growth, Harvard Business School Press, Boston, MA (1997).Google Scholar
  103. Westbrook, R. and Williamson, P., “Mass Customization,” European Management Journal, Vol. 11, No. 1, pp. 38–45 (1993).CrossRefGoogle Scholar
  104. Wikström, S., “Value Creation by Company-Consumer Interaction,” Journal of Marketing Management, Vol. 12, pp. 359–374 (1996).Google Scholar
  105. Wind, Y. and Rangaswamy, A., “Customerization: The Next Revolution in Mass Customization,” Journal of Interactive Marketing, Vol. 15, No. 1, pp. 13–32 (2001).CrossRefGoogle Scholar
  106. Zahra, S. A. and George, G., “Absorptive Capacity: A Review, Reconceptualization, and Extension,” Academy of Management Review, Vol. 27, No. 2, pp. 185–203 (2002).CrossRefGoogle Scholar
  107. Zipkin, P., “The Limits of Mass Customization,” Sloan Management Review, Vol. 42, No. 3, pp. 81–87 (Spring 2001).Google Scholar
  108. Zuboff, S. and Maxmin, J., The Support Economy: Why Corporations are Failing Individuals and the Next Episode of Capitalism, Viking Penguin, London (2002).Google Scholar

Copyright information

© Springer Science + Business Media, Inc. 2005

Authors and Affiliations

  1. 1.TUM Business SchoolTechnische Universität MünchenGermany

Personalised recommendations