Advertisement

Fibre Chemistry

, Volume 51, Issue 1, pp 68–72 | Cite as

Analytic Methods of Calculating the Strength of Viscose Woolen Yarn Based on Transverse Strain of the Fibers

  • N. S. Skulanova
  • T. V. Podal’naya
  • T. I. Polyakova
Article
  • 12 Downloads

The stresses and strains of fibers and yarn are investigated, based on the variation of the diameter of the yarn as it is subjected to strain and the effect of compressive forces that arise as a consequence of the spatial arrangement of the fibers in the yarn. It is shown that compressive stresses increase the strain of the fibers and decrease the strength of the yarn. Calculations of the breaking load of the yarn for the simplest and most refined strength theory are given. The mechanism of failure of yarn is demonstrated and numerical estimates of the basic parameters of the stress-strain state of fibers in yarn are obtained.

References

  1. 1.
    V. P. Shcherbakov, Applied and Structural Mechanics of Fibrous Materials [in Russian], Tiso Print, Moscow (2013), 304 pp.Google Scholar
  2. 2.
    V. P. Shcherbakov and N. S. Skulanova, Fundamentals of the Theory of Strain and Strength of Textile Materials: Monograph [in Russian], Kosygin State Technical University of Moscow, Moscow (2008), 268 pp.Google Scholar
  3. 3.
    J. W. S. Hearle, P. Grosberg, and S. Backer, Structural Mechanics of Fibers, Yarns, and Fabrics, New York (1969).Google Scholar
  4. 4.
    Y. N. Rabotnov, Mechanics of Deformed Solids [in Russian], Nauka, Moscow (1979), 744 pp.Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • N. S. Skulanova
    • 1
  • T. V. Podal’naya
    • 1
  • T. I. Polyakova
    • 1
  1. 1.Kosygin Russian State University (Technologies. Design/ Art)MoscowRussia

Personalised recommendations