Advertisement

Properties and Technology of Applying Metal Coatings to Carbon Tape

  • V. A. NelyubEmail author
  • B. L. Gorberg
  • M. V. Grishin
  • S. Yu. Sarvadii
  • B. R. Shub
  • A. A. Berlin
  • G. V. Malysheva
Article
  • 3 Downloads

The results of evaluating the adhesion strength and mechanical characteristics of elementary filaments used to make LUP carbon tape after metal plating the tape with titanium and stainless steel are presented. The thickness of these coatings is determined by atomic force microscopy and also by measuring the diameter of filaments before and after metal plating. Two types of single-layer coatings are considered – titanium grade VT1-0 and stainless steel grade 12X18H10T, as well as a two-layer coating consisting of a layer of titanium with a layer of stainless steel on top. To determine the adhesive strength using the pull-out method, a binder was used based on epoxy resin and an amine hardener.

Notes

The results of this work were obtained as part of the project on the topic “Scientific research on the development of composite materials with a controlled chaos structure and their use in high-tech production” under the task No. 11.7291.2017/BCh.

References

  1. 1.
    N. I. Baurova and V. A. Zorin, Application of Polymer Composite Materials in the Manufacture and Repair of Machines: Textbook [in Russian], MADI, Moscow (2016) 264 p.Google Scholar
  2. 2.
    I. A. Buyanov and D. S. Vdovin, Adhesives. Sealants. Technology. [in Russian], 10, 22-24 (2016).Google Scholar
  3. 3.
    S. V. Reznik, O. V. Denisov, et al., All materials: Encyclopedia [in Russian], 3, 2-6 (2012).Google Scholar
  4. 4.
    N. I. Baurova, V. A. Zorin, and V. M. Prikhodko, Polymer Sci. Ser. D, 8, No. 2, 92-95 (2015).CrossRefGoogle Scholar
  5. 5.
    G. V. Malysheva and Y. Y. Shimina, Fiber Chemistry, 46, No. 4, 237-240 (2014).CrossRefGoogle Scholar
  6. 6.
    V. A. Nelyub, Fiber Chemistry, 47, No. 1, 40-42 (2015).CrossRefGoogle Scholar
  7. 7.
    A. S. Borodulin and L. P. Kobets, Novosti Materialovedeniya . Nauka i Tekhnologiya, 5, 5 (2013).Google Scholar
  8. 8.
    T. A. Kiriyenko, N. F. Lukina, et al., Klei. Germetiki. Tekhnologii, 2, 6-8 (2016).Google Scholar
  9. 9.
    V. K. Kryzhanovsky, V. V. Burlov, et al., Technical Properties of Polymeric Materials: Textbook [in Russian], Professiya, St. Petersburg (2003) 240 p.Google Scholar
  10. 10.
    B. L. Gorberg, A. A. Ivanov, et al., Ros. Khim. Zh., LV, No. 3, 7-13 (2011).Google Scholar
  11. 11.
    Yu. A. Gorbatkina, Klei. Germetiki. Tekhnologii, 10, 17-19 (2008).Google Scholar
  12. 12.
    Yu. A. Gorbatkina, V. G. Ivanova-Mumzhieva, et al., Mekhanika Kompoz. Materialov, 43, No. 1, 3-14 (2007).Google Scholar
  13. 13.
    Yu. A. Gorbatkina and V. G. Ivanova-Mumzhieva, Klei. Germetiki. Tekhnologii, 3, 28-30 (2009).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • V. A. Nelyub
    • 1
    Email author
  • B. L. Gorberg
    • 2
  • M. V. Grishin
    • 3
  • S. Yu. Sarvadii
    • 3
  • B. R. Shub
    • 3
  • A. A. Berlin
    • 3
  • G. V. Malysheva
    • 1
  1. 1.Bauman Moscow State Technical UniversityMoscowRussia
  2. 2.Ivanovo State University of Chemistry and TechnologyIvanovoRussia
  3. 3.N. N. Semenov Institute of Chemical Physics, RASMoscowRussia

Personalised recommendations