Investigation of the Surface of Printed Textile Materials by Microphotography and Atomic Force Microscopy
Article
First Online:
- 45 Downloads
The properties of complex thickeners based on polyurethane and natural polymers used in pigment printing are investigated. The optimum ratio of the components is determined. Optical, scanning electron, and atomic force microscopy show that the use of polyurethane in such thickeners increases the softness of the printed materials.
References
- 1.E. E. Kuznetsova, A. A. Mishchenko, et al., Khim. Volokna, 6, 53-56 (2014).Google Scholar
- 2.E. E. Kuznetsova, P. A. Orospaeva, and V. V. Safonov, “Pigment printing compositions based on polyurethane and complex thickeners” [in Russian], Abstracts of the Int. Sci.-Techn. Conf. “Design, technology and innovation in the textile and clothing industry” (Innovation – 2014), MSUDT, Moscow, p. 15-17 (2014).Google Scholar
- 3.V. N. Nikitenkova, The Development of Printing Technology of Cotton Fabrics with Pigment Dyes Using Chitosan [in Russian], doctoral diss. from May 19, 2002, A. N. Kosygin Moscow State Textile University, Moscow (2002) 174 p.Google Scholar
- 4.Workshop on Chemical Technology of Textile Finishing: Textbook [in Russian], Ed. V. V. Safonov, A. N. Kosygin Moscow State Textile University, Moscow (2008) 595 p.Google Scholar
- 5.V. P. Shcherbakov, Applied and Structural Mechanics of Fibrous Materials [in Russian], A. N. Kosygin Moscow State Textile University, Moscow (2013) 304 p.Google Scholar
- 6.E. E. Kuznetsova, A. E. Tret’yakova, and V. V. Safonov, Izv. VUZov Tekhnol. Tekst. Promyshl. (Reports from Higher Education Institutions – “Technology of the Textile Industry”), 1, 77-82 (2014).Google Scholar
- 7.E. E. Kuznetsova, A. E. Tret’yakova, and V. V. Safonov, Izv. VUZov Tekhnol. Tekst. Promyshl. (Reports from Higher Education Institutions – “Technology of the Textile Industry”), 2, 60-64 (2014).Google Scholar
- 8.E. A. Antipova, N. P. Korotkova, and V. S. Lebedev, Ekonomika i Statistika, No. 9 (2012).Google Scholar
Copyright information
© Springer Science+Business Media New York 2017