Advertisement

Electromagnetic heating control via high-frequencyresonance of a triple-layer laminate

  • J. M. Gaone
  • B. S. TilleyEmail author
  • V. V. Yakovlev
Article
  • 28 Downloads

Abstract

Beamed energy transport requires the use of heat exchangers to collect the thermal energy produced from the absorption of electromagnetic radiation. To explore the high-frequency effects of wave–geometry interactions on this heat transfer, we consider a central dielectric layer, possessing a temperature-dependent loss factor, surrounded by two fluid channels filled with a lossless dielectric fluid. Considering an asymptotically thin domain, we derive a diffusion–reaction equation, assuming no flow in the fluid. We show that the high-frequency effects generate a new energy balance leading to a previously unknown steady-state solution. A characterization of the steady-state-dependent parameters is performed in an effort to determine a mechanism to control the nonlinear heating. Diffusive effects are shown to produce regions of the power response where steady-state solutions are replaced by traveling-wave solutions. These regions are also location to the greatest heating efficiency. Analytical approximations to the wave speed and location of these regions are found using boundary layer theory.

Keywords

Microwave heating Photonic crystal Thermal runaway 

Notes

Acknowledgements

The authors are grateful for the support from the Air Force Office of Scientific Research; Award FA9550-15-0476 and the National Science Foundation MRI Grant DMS-1337943 for high performance computing. This work was funded by AFOSR Award FA9550-15-0476 and NSF MRI Grant DMS-1337943 for high performance computing.

Supplementary material

References

  1. 1.
    Datta AK, Anantheswaran RC (2001) Handbook of microwave technology for food applications. CRC Press, New YorkCrossRefGoogle Scholar
  2. 2.
    Leadbeater N (2010) Microwave heating as a tool for sustainable chemistry. In: Cann MC (ed) Sustainability: contributions through science and technology. CRC Press, Boca RatonGoogle Scholar
  3. 3.
    Aguilar-Garib J (2011) Chap. 12: thermal microwave processing of materials. In: Grundas C (ed) Advances in induction and microwave heating of mineral and organic materials. InTech, Rijeka, pp 243–268Google Scholar
  4. 4.
    Chandrasekaran S, Ramanathan S, Basak T (2012) Microwave materials processing–a review. AlChE J 58(2):330–363CrossRefGoogle Scholar
  5. 5.
    Singh S, Gupra D, Jain V, Sharma A (2015) Microwave processing and applications of manufacturing industry: a review. Mater Manuf Process 30(1):1–29CrossRefGoogle Scholar
  6. 6.
    Willert-Porada M (2006) Advances in microwave and radio frequency proceedings. Springer, BerlinCrossRefGoogle Scholar
  7. 7.
    Jamar A, Majid Z, Azmi W, Norhafana M, Razak A (2016) A review of water heating system for solar energy applications. Int Commun Heat Mass Transf 76:178–187CrossRefGoogle Scholar
  8. 8.
    George P, Beach R (2012) Beamed-energy propulsion (BEP) study. Technical report, NASA/TM-2012-217014Google Scholar
  9. 9.
    Kriegsmann G (1992) Thermal runaway in microwave heated ceramics: a one-dimensional model. J Appl Phys 71(4):1960–1966CrossRefGoogle Scholar
  10. 10.
    Pelesko J, Kriegsmann G (1997) Microwave heating of ceramic laminates. J Eng Math 32:1–18MathSciNetCrossRefGoogle Scholar
  11. 11.
    Osepchuck J (1984) A history of microwave heating applications. IEEE Trans Microw Theory Tech 32:1200–1224CrossRefGoogle Scholar
  12. 12.
    Chandran M, Neculaes V, Brisco D, Katz S, Schoonover J, Cretegny L (2013) Experimental and numerical studies of microwave power redistribution during thermal runaway. J Appl Phys 114:204904CrossRefGoogle Scholar
  13. 13.
    ChangJun L, Sheen D (2008) Analysis and control of the thermal runaway of ceramic slab under microwave heating. Sci China E 51(12):2233–2241CrossRefGoogle Scholar
  14. 14.
    Liu C, Sheen D (2008) Analysis and control of the thermal runaway of ceramic slab under microwave heating. Sci China E 51:2233–22415CrossRefGoogle Scholar
  15. 15.
    Parris P, Kenkre V (1997) Thermal runaway in ceramics arising from the temperature dependence of the thermal conductivity. Phys Status Solidi (b) 200:1–9CrossRefGoogle Scholar
  16. 16.
    Semenov V, Zharova N (2006) Thermal runaway and hot spots under controlled microwave heating. In: Advances in microwave radio frequency processing, p 482–490Google Scholar
  17. 17.
    Vriezinga C, Sánchez-Pedreño S, Grasman J (2002) Thermal runaway in microwave heating: a mathematical analysis. Appl Math Model 26:1029–1038CrossRefGoogle Scholar
  18. 18.
    Yakovlev V, Allan S, Fall M, Shulman H (2011) Computational study of thermal runaway in microwave processing of zirconia. In: Tao J (ed) Microwave and RF power applications. Cépaduès Éditions, Toulouse, pp 303–306Google Scholar
  19. 19.
    Gaone J, Tilley B, Yakovlev V (2017) Permittivity-based control of thermal runaway in a triple-layer laminate. In: IEEE MTT-S international microwave symposium digest, Honolulu, HI, June 2017. ISBN 978-1-5090-6360-4Google Scholar
  20. 20.
    Kriegsmann G (1992) Thermal runaway and its control in microwave heated ceramics. MRS Proc 269:257CrossRefGoogle Scholar
  21. 21.
    Wu X, Thomas J, Davis W (2002) Control of thermal runaway in microwave resonant cavities. J Appl Phys 92(6):3374–3380CrossRefGoogle Scholar
  22. 22.
    Kriegsmann G, Brodwin M, Watters D (1990) Microwave heating of a ceramic halfspace. SIAM J Appl Math 50(4):1088–1098MathSciNetCrossRefGoogle Scholar
  23. 23.
    Mohekar A, Gaone J, Tilley B, Yakovelev V (2018) Multiphysics simulation of temperature profiles in a triple-layer model of a microwave heat exchanger. In: IEEE MTT-S international microwave symposium digest, Philadelphia, PA, June 2018. ISBN 978-1-5386-5067-7Google Scholar
  24. 24.
    Griffiths D (1999) Introduction to electrodynamics. Pearson Education, Upper Saddle RiverGoogle Scholar
  25. 25.
    Jackson J (1999) Classical electrodynamics. Wiley, New YorkzbMATHGoogle Scholar
  26. 26.
    Westphal W, Sils A (1972) Dielectric constant and loss data. Technical Report AFML-TR-72-39. Air Force Materials LaboratoryGoogle Scholar
  27. 27.
    Rayleigh L (1888) On the remarkable phenomenon of crystalline reflexion described by Prof. Stokes. Philos Mag 26(160):256–265CrossRefGoogle Scholar
  28. 28.
    Ozbay E, Temelkuran B, Bayindir M (2003) Microwave applications of photonic crystals. Prog Electromagn Res 41:185–209CrossRefGoogle Scholar
  29. 29.
    Vovchenko L, Lozitsky O, Sagalianov I, Matzui L, Launets V (2017) Microwave properties of one-dimensional photonic structures based on composite layers filled with nanocarbon. Nanoscale Res Lett 12:269CrossRefGoogle Scholar
  30. 30.
    Demésy G, John S (2012) Solar energy trapping with modulated silicon nanowire photonic crystals. J Appl Phys 112:074326CrossRefGoogle Scholar
  31. 31.
    Krauss T, Rue RDL (1999) Photonic crystals in the optical regime–past, present and future. Prog Quantum Electron 23:51–96CrossRefGoogle Scholar
  32. 32.
    Meaney P, Fox C, Geimer S, Paulsen K (2017) Electrical characterization of glycerin: water mixtures: implications for use as a coupling medium in microwave tomography. IEEE Trans Microw Theory Tech 65(5):1471–1478CrossRefGoogle Scholar
  33. 33.
    Glycerine Producers’ Association (1963) Physical properties of glycerine and its solutions. Glycerine Producers’ Association, New YorkGoogle Scholar
  34. 34.
    Ruuth S (1994) Implicit-explicit methods for reaction-diffusion problems in pattern formation. J Math Biol 34:148–176MathSciNetCrossRefGoogle Scholar
  35. 35.
    Volpert V (2014) Elliptic partial differential equations, volume 2: reaction–diffusion equations, monographs in mathematics, vol 104. Birkhäuser, BaselCrossRefGoogle Scholar
  36. 36.
    Zeldovich Y, Frank-Kamenetskii D (1938) A theory of thermal propagation of flame. Acta Physicochim 9:341–350Google Scholar
  37. 37.
    Hill J, Marchant T (1996) Modelling microwave heating. Appl Math Model 20:3–15CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  1. 1.Center for Industrial Mathematics and Statistics, Department of Mathematical SciencesWorcester Polytechnic InstituteWorcesterUSA

Personalised recommendations