Advertisement

Water quality characteristics and corrosion potential in blending zones in X city drinking water distribution system

  • Hui Zhang
  • Kai Wang
  • Xue Zhou
  • Weihuang Zhu
  • Wendong Wang
Article
  • 92 Downloads

Abstract

Blended water, always existing in a drinking water distribution system (DWDS) with different sources, can cause some unintended results, including corrosion and/or release of corrosion by-products. Although some studies have specially focused on the blended water in DWDSs, the water quality characteristics, variations, and mechanisms for corrosion and metal release have not been fully understood. This study aims to examine the characteristics and evaluate the corrosion potential of blended water in X city DWDS using four indices of Langelier saturation index (LSI), Ryznar stability index (RSI), Puckorius scaling index (PSI), and calcium carbonate precipitation potential (CCPP). Physical and chemical analysis showed that the values of pH, total dissolved solids (TDS), sulfate (SO42−), and chloride (Cl) in blended water were always at acceptable levels, while some free residual chlorine concentrations fell outside the regulatory standards (≥ 0.05 mg/L) with the minimum of 0.01 mg/L. Most parameters except pH varied in large ranges with maximum to minimum ratios (MMRs) over 2.25. The mean values of the LSI, RSI, PSI, and CCPP indices were − 0.44, 8.65, 8.79, and − 1.95 mg/L CaCO3, respectively, indicating that the blended water was slightly corrosive. For the three zones, Z2 had the highest mean levels of TDS (320.84 mg/L), alkalinity (188.70 mg/L CaCO3), SO42− (13.69 mg/L), Cl (36.37 mg/L), calcium hardness (Ca2+) (28.99 mg/L), and magnesium hardness (Mg2+) (15.22 mg/L) and the lowest mean level of dissolved oxygen (DO) (6.72 mg/L). Thus, the corrosion potential in Z2 was the lowest with the LSI, RSI, PSI, and CCPP values of − 0.17, 8.11, 8.08, and 2.87 mg/L CaCO3, respectively. During a year, the corrosion in blended water was more serious in winter with the LSI, RSI, PSI, and CCPP indices of − 0.79, 9.25, 9.37, − 7.54 mg/L CaCO3, respectively. The water corrosivity reached the minimum level in summer (LSI − 0.12, RSI 8.05, PSI 8.03, and CCPP 5.22 mg/L CaCO3) owing to the decrease of DO concentrations and the increase of temperature and groundwater supplies with higher alkalinity. During rainy season, the concentrations of TDS, alkalinity, SO42−, Cl, Ca2+, and Mg2+ in blended water were reduced by 41.05%, 40.48%, 35.83%, 47.48%, 23.47%, and 55.73%, respectively, resulting in the increase of water corrosivity. More decreases of water parameters were recorded in Z2 (TDS, 221.80 mg/L; alkalinity, 139.50 mg/L CaCO3; SO42−, 9.97 mg/L; Cl, 13.74 mg/L; Ca2+, 7.10 mg/L; and Mg2+, 11.37 mg/L), because most groundwater from No. 5 WTP was pumped paretic water with more variations of water quality by rainfall. Moreover, it was suggested that Mg2+ should be considered in the corrosion indices, and the corrosion tendency of blended water could be reduced by adjusting the levels of pH, alkalinity, Ca2+, and Mg2+. The results of this research may pave the way for several opportunities to improve the management and corrosion prevention of blended water.

Keywords

Corrosion potential Water quality Blended water Drinking water distribution system Drinking water 

Notes

Acknowledgments

The authors acknowledge the support from Xi'an Waterworks Co., Ltd. The authors would also like to thank the editors and reviewers for their valuable comments and suggestions.

Funding information

This study was supported by the National Natural Science Foundation of China (No. 51508452), Natural Science Basic Research Plan in Shaanxi Province of China (Program No. 2018JM5125), Special scientific research project of Shaanxi Education Department (17JK0466), and the Science and technology overall plan of Shaanxi Province (No. 2016KTCG01-17).

References

  1. Agatemor, C., & Okolo, P. (2008). Studies of corrosion tendency of drinking water in the distribution system at the University of Benin. The Environmentalist, 28(4), 379–384.CrossRefGoogle Scholar
  2. Baig, S. A., Lou, Z., Baig, M. A., Qasim, M., Shams, D. F., Mahmood, Q., & Xu, X. (2017). Assessment of tap water quality and corrosion scales from the selected distribution systems in northern Pakistan. Environmental Monitoring and Assessment, 189(4), 194.CrossRefGoogle Scholar
  3. Cai, M., Liu, W., & Sun, W. (2018). Formation and speciation of disinfection byproducts in desalinated seawater blended with treated drinking water during chlorination. Desalination, 437, 7–14.CrossRefGoogle Scholar
  4. Cheo, A. E., Voigt, H.-J., & Wendland, F. (2017). Modeling groundwater recharge through rainfall in the far-north region of Cameroon. Groundwater for Sustainable Development, 5, 118–130.CrossRefGoogle Scholar
  5. Choi, J., Choi, B. G., & Hong, S. (2015). Effects of NF treated water on corrosion of pipe distribution system and its implications to blending with conventionally treated water. Desalination, 360, 138–145.CrossRefGoogle Scholar
  6. Corada-Fernández, C., Candela, L., Torres-Fuentes, N., Pintado-Herrera, M. G., Paniw, M., & González-Mazo, E. (2017). Effects of extreme rainfall events on the distribution of selected emerging contaminants in surface and groundwater: The Guadalete River basin (SW, Spain). Science of the Total Environment, 605-606, 770–783.CrossRefGoogle Scholar
  7. Esmaeili-Vardanjani, M., Rasa, I., Amiri, V., Yazdi, M., & Pazand, K. (2015). Evaluation of groundwater quality and assessment of scaling potential and corrosiveness of water samples in Kadkan aquifer, Khorasan-e-Razavi Province, Iran. Environmental Monitoring and Assessment, 187(2), 53.CrossRefGoogle Scholar
  8. Fisher, I., Kastl, G., & Sathasivan, A. (2012). A suitable model of combined effects of temperature and initial condition on chlorine bulk decay in water distribution systems. Water Research, 46(10), 3293–3303.CrossRefGoogle Scholar
  9. Fisher, I., Kastl, G., & Sathasivan, A. (2017). New model of chlorine-wall reaction for simulating chlorine concentration in drinking water distribution systems. Water Research, 125, 427–437.CrossRefGoogle Scholar
  10. Gerke, T. L., Maynard, J. B., Schock, M. R., & Lytle, D. L. (2008). Physiochemical characterization of five iron tubercles from a single drinking water distribution system: Possible new insights on their formation and growth. Corrosion Science, 50(7), 2030–2039.CrossRefGoogle Scholar
  11. Gholizadeh, A., Mokhtari, M., Naimi, N., Shiravand, B., Ehrampoush, M. H., Miri, M., & Ebrahimi, A. (2017). Assessment of corrosion and scaling potential in groundwater resources; a case study of Yazd-Ardakan Plain, Iran. Groundwater for Sustainable Development, 5, 59–65.CrossRefGoogle Scholar
  12. Goyal, R. V., & Patel, H. M. (2015). Analysis of residual chlorine in simple drinking water distribution system with intermittent water supply. Applied Water Science, 5(3), 311–319.CrossRefGoogle Scholar
  13. Gupta, R., & Misra, A. K. (2018). Groundwater quality analysis of quaternary aquifers in Jhajjar District, Haryana, India: Focus on groundwater fluoride and health implications. Alexandria Engineering Journal, 57(1), 375–381.CrossRefGoogle Scholar
  14. Imran, S. A., Dietz, J. D., Mutoti, G., Xiao, W., Taylor, J. S., & Desai, V. (2006). Optimizing source water blends for corrosion and residual control in distribution systems. Journal of American Water Works Association, 98, 107–115.CrossRefGoogle Scholar
  15. Jin, J., Wu, G., & Guan, Y. (2015). Effect of bacterial communities on the formation of cast iron corrosion tubercles in reclaimed water. Water Research, 71, 207–218.CrossRefGoogle Scholar
  16. Khorsandi, H., Mohammadi, A., Karimzadeh, S., & Khorsandi, J. (2016). Evaluation of corrosion and scaling potential in rural water distribution network of Urmia, Iran. Desalination and Water Treatment, 57(23), 10585–10592.CrossRefGoogle Scholar
  17. Li, X., Wang, H., Zhang, Y., Hu, C., & Yang, M. (2014). Characterization of the bacterial communities and iron corrosion scales in drinking groundwater distribution systems with chlorine/chloramine. International Biodeterioration & Biodegradation, 96, 71–79.CrossRefGoogle Scholar
  18. Li, X., Wang, H., Hu, X., Hu, C., & Liao, L. (2016). Characteristics of corrosion sales and biofilm in aged pipe distribution systems with switching water source. Engineering Failure Analysis, 60, 166–175.CrossRefGoogle Scholar
  19. Li, W., Zhang, J., Wang, F., Qian, L., Zhou, Y., Qi, W., & Chen, J. (2018a). Effect of disinfectant residual on the interaction between bacterial growth and assimilable organic carbon in a drinking water distribution system. Chemosphere, 202, 586–597.CrossRefGoogle Scholar
  20. Li, Z., Wang, G., Wang, X., Wan, L., Shi, Z., Wanke, H., Uugulu, S., & Uahengo, C.-I. (2018b). Groundwater quality and associated hydrogeochemical processes in Northwest Namibia. Journal of Geochemical Exploration, 186, 202–214.CrossRefGoogle Scholar
  21. Lipphaus, P., Hammes, F., Kötzsch, S., Green, J., Gillespie, S., & Nocker, A. (2014). Microbiological tap water profile of a medium-sized building and effect of water stagnation. Environmental Technology, 35(5), 620–628.CrossRefGoogle Scholar
  22. Liu, J., Chen, H., Yao, L., Wei, Z., Lou, L., Shan, Y., Endalkachew, S. D., Mallikarjuna, N., Hu, B., & Zhou, X. (2016). The spatial distribution of pollutants in pipe-scale of large-diameter pipelines in a drinking water distribution system. Journal of Hazardous Materials, 317, 27–35.CrossRefGoogle Scholar
  23. Lytle, D. A., & Nadagouda, M. N. (2010). A comprehensive investigation of copper pitting corrosion in a drinking water distribution system. Corrosion Science, 52(6), 1927–1938.CrossRefGoogle Scholar
  24. Maeng, M., Hyun, I., Choi, S., & Dockko, S. (2015). Effects of rainfall characteristics on corrosion indices in Korean river basins. Desalination and Water Treatment, 54(4–5), 1233–1241.CrossRefGoogle Scholar
  25. Makris, K. C., Andra, S. S., & Botsaris, G. (2014). Pipe scales and biofilms in drinking-water distribution systems: Undermining finished water quality. Critical Reviews in Environmental Science and Technology, 44(13), 1477–1523.CrossRefGoogle Scholar
  26. McNeill, L. S., & Edwards, M. (2002). The importance of temperature in assessing Iron pipe corrosion in water distribution systems. Environmental Monitoring and Assessment, 77(3), 229–242.CrossRefGoogle Scholar
  27. Mesdaghinia, A., Nabizadeh Nodehi, R., Nasseri, S., Imran, S. A., Samadi, M. T., & Hadi, M. (2016). Potential for iron release in drinking water distribution system: a case study of Hamedan city, Iran. Desalination and Water Treatment, 57(31), 14461–14472.CrossRefGoogle Scholar
  28. Mi, Z., Zhang, X., & Chen, C. (2016). Iron release in drinking water distribution systems by feeding desalinated seawater: characteristics and control. Desalination and Water Treatment, 57(21), 9728–9735.CrossRefGoogle Scholar
  29. Ministry of Health P. R. China, (2007). Standards for drinking water quality. Beijing: China Planning Press. (in Chinese).Google Scholar
  30. Mirzabeygi, M., Naji, M., Yousefi, N., Shams, M., Biglari, H., & Mahvi, A. H. (2016). Evaluation of corrosion and scaling tendency indices in water distribution system: a case study of Torbat Heydariye, Iran. Desalination and Water Treatment, 57(54), 25918–25926.CrossRefGoogle Scholar
  31. Niu, B., Wang, H., Loaiciga, H. A., Hong, S., & Shao, W. (2017). Temporal variations of groundwater quality in the Western Jianghan Plain, China. Science of the Total Environment, 578, 542–550.CrossRefGoogle Scholar
  32. Ravikumar, P., & Somashekar, R. K. (2012). Assessment and modelling of groundwater quality data and evaluation of their corrosiveness and scaling potential using environmetric methods in Bangalore South Taluk, Karnataka State, India. Water Resources, 39, 446–473.CrossRefGoogle Scholar
  33. Sako, A., Bamba, O., & Gordio, A. (2016). Hydrogeochemical processes controlling groundwater quality around Bomboré gold mineralized zone, Central Burkina Faso. Journal of Geochemical Exploration, 170, 58–71.CrossRefGoogle Scholar
  34. Sarin, P., Snoeyink, V. L., Bebee, J., Jim, K. K., Beckett, M. A., Kriven, W. M., & Clement, J. A. (2004). Iron release from corroded iron pipes in drinking water distribution systems: effect of dissolved oxygen. Water Research, 38(5), 1259–1269.CrossRefGoogle Scholar
  35. Schock, M. R., Hyland, R. N., & Welch, M. M. (2008). Occurrence of contaminant accumulation in lead pipe scales from domestic drinking-water distribution systems. Environmental Science & Technology, 42(12), 4285–4291.CrossRefGoogle Scholar
  36. Shankar, B. S. (2014). Determination of scaling and corrosion tendencies of water through the use of Langelier and Ryznar indices. Scholars Journal of Engineering and Technology, 2(2A), 123–127.Google Scholar
  37. Sharif, M. N., Farahat, A., Haider, H., Al-Zahrani, M. A., Rodriguez, M. J., & Sadiq, R. (2017). Risk-based framework for optimizing residual chlorine in large water distribution systems. Environmental Monitoring and Assessment, 189(7), 307.CrossRefGoogle Scholar
  38. Sisay, T., Beyene, A., & Alemayehu, E. (2017). Spatiotemporal variability of drinking water quality and the associated health risks in southwestern towns of Ethiopia. Environmental Monitoring and Assessment, 189(11), 569.CrossRefGoogle Scholar
  39. Song, Y., Zhou, W., Ma, C., Li, H., & Liu, B. (2015). Analysis of spatial variability of groundwater depth in Xi’an downtown area. Yellow River, 37(8), 56–59 (in Chinese).Google Scholar
  40. Stefania, G. A., Zanotti, C., Bonomi, T., Fumagalli, L., & Rotiroti, M. (2018). Determination of trigger levels for groundwater quality in landfills located in historically human-impacted areas. Waste Management, 75, 400–406.CrossRefGoogle Scholar
  41. Sun, H., Shi, B., Yang, F., & Wang, D. (2017). Effects of sulfate on heavy metal release from iron corrosion scales in drinking water distribution system. Water Research, 114, 69–77.CrossRefGoogle Scholar
  42. Świetlik, J., Raczyk-Stanisławiak, U., Piszora, P., & Nawrocki, J. (2012). Corrosion in drinking water pipes: the importance of green rusts. Water Research, 46(1), 1–10.CrossRefGoogle Scholar
  43. Tan, H., He, W., Han, H., Lu, Y., & Zhang, N. (2015). Speciation of iron and development of iron corrosion scales in drinking water distribution systems. Desalination and Water Treatment, 56(3), 646–654.CrossRefGoogle Scholar
  44. Wang, W., Li, H., Wang, X., & Liu, Y. (2010). Spatial variations of aluminum species in drinking water supplies in Xi’an studied applying geographic information system. Journal of Environmental Sciences, 22(4), 519–525.CrossRefGoogle Scholar
  45. Wang, H., Zhu, Y., & Hu, C. (2017). Impacts of bacteria and corrosion on removal of natural organic matter and disinfection byproducts in different drinking water distribution systems. International Biodeterioration & Biodegradation, 117, 52–59.CrossRefGoogle Scholar
  46. Yang, F., Shi, B., Bai, Y., Sun, H., Lytle, D. A., & Wang, D. (2014). Effect of sulfate on the transformation of corrosion scale composition and bacterial community in cast iron water distribution pipes. Water Research, 59, 46–57.CrossRefGoogle Scholar
  47. Zhang, H. H., Chen, S. N., Huang, T. L., Shang, P. L., Yang, X., & Ma, W. X. (2015). Indoor heating drives water bacterial growth and community metabolic profile changes in building tap pipes during the winter season. International Journal of Environmental Research and Public Health, 12(10), 13649–13661.CrossRefGoogle Scholar
  48. Zhang, H., Xu, J.-L., & Cheng, X. (2016). Interactive educational software for teaching water distribution networks design. Computer Applications in Engineering Education, 24(4), 615–628.CrossRefGoogle Scholar
  49. Zhang, H., Zhou, X., Wang, K., & Wang, W. D. (2017). Health risk assessment of arsenic from blended water in distribution systems. Journal of Environmental Science and Health, Part A, 52(14), 1322–1329.CrossRefGoogle Scholar
  50. Zheng, M., He, C., & He, Q. (2015). Fate of free chlorine in drinking water during distribution in premise plumbing. Ecotoxicology, 24(10), 2151–2155.CrossRefGoogle Scholar
  51. Zhu, Y., Wang, H., Li, X., Hu, C., Yang, M., & Qu, J. (2014). Characterization of biofilm and corrosion of cast iron pipes in drinking water distribution system with UV/Cl2 disinfection. Water Research, 60, 174–181.CrossRefGoogle Scholar
  52. Zlatanovic, L., van der Hoek, J. P., & Vreeburg, J. H. G. (2017). An experimental study on the influence of water stagnation and temperature change on water quality in a full-scale domestic drinking water system. Water Research, 123, 761–772.CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2018

Authors and Affiliations

  • Hui Zhang
    • 1
  • Kai Wang
    • 1
  • Xue Zhou
    • 1
  • Weihuang Zhu
    • 1
  • Wendong Wang
    • 2
  1. 1.School of Environmental and Municipal EngineeringXi’an University of Architecture and TechnologyXi’anPeople’s Republic of China
  2. 2.School of Human Settlements and Civil EngineeringXi’an Jiaotong UniversityXi’anPeople’s Republic of China

Personalised recommendations