Fractionation profile and mobility pattern of metals in sediments from the Mediterranean Coast, Libya
- 186 Downloads
- 5 Citations
Abstract
A five-step sequential extraction technique, following Tessier’s protocol, has been applied to determine the chemical association of Cd, Cu, Fe, Pb, and Zn with major sedimentary phases (exchangeable, carbonate, manganese and iron oxides, organic and residual fraction) in surface sediments from 14 stations off the Libyan Mediterranean coast. This study is a first approach of chemical fractionation of these metals in one of the most economically important area of the Libyan coastline in Mediterranean Sea. The total metal content was also determined. The total concentration of metals ranged from 5–10.5 mg/kg for Cd, 9.1–22.7 mg/kg for Cu, 141.8–1056.8 mg/kg for Fe, 18.9–56.9 mg/kg for Pb, and 11.6–30.5 mg/kg for Zn. The results of the partitioning study showed that the residual form was the dominant fraction of the selected metals among most of the studied locations. The degree of surface sediment contamination was computed for risk assessment code (RAC), individual contamination factor (ICF), and Global contamination factor (GCF). Risk assessment code classification showed that the relative amounts of easily dissolved phase of trace metals in the sediments are in the order of Pb>Zn>Cd>Cu>Fe. The results of ICF and GCF showed that Sirt and Abu Kammashand had higher GCF than other sites indicating higher environmental risk. In terms of ICF value, a decrease order in environmental risk by trace metals was Pb>Zn>Cu>Cd>Fe. Therefore, Pb had highest risk to water body.
Keywords
Sediments Sequential extraction procedure Mediterranean coastReferences
- Al-Hengari, S., El-Bousiffi, M., & El-Moudir, W. (2007). Libyan Petroleum Institute experience in evaluation of desalination plants in the Libyan oil sector. Desalination, 206, 633–752.CrossRefGoogle Scholar
- Badri, M. A., & Aston, S. R. (1983). Observation on heavy metal geochemical associations in polluted and nonpolluted estuarine sediments. Environmental Pollution (Series B), 6, 181.CrossRefGoogle Scholar
- Barona, A., Aranguiz, I., & Elias, A. (1999). Assessment of metal extraction, distribution and contamination in surface soils by a 3-step sequential extraction procedure. Chemosphere, 39(1), 1 911–1 922.CrossRefGoogle Scholar
- Borovec, Z., Tolar, V., & Mraz, L. (1993). Distribution of some metals in sediments of the central part of the Labe (Eibe) River: Czech Republic. Ambio, 22, 200–205.Google Scholar
- Campanella, L., Dorazio, D., Petronio, B. M., & Pietrantonio, E. (1995). Proposal for a metal speciation study in sediments. Analytica Chimica Acta, 309, 387–393.CrossRefGoogle Scholar
- El Haddad, H. S. (2012). Assessment of heavy metals and petroleum hydrocarbons pollution in bottom sediment along the Libyan Coast (Tobruk–Ras Gidier). Ph.D. Thesis, Alexandria University, Egypt.Google Scholar
- Gleyzes, C., Tellier, S., & Astruc, M. (2002). Fractionation studies of trace elements in contaminated soils and sediments: a review of sequential extraction procedures. Trends in Analytical Chemistry, 21(6-7), 451–467.CrossRefGoogle Scholar
- Gomes, M. V. T., Costa, A. S., Garcia, C. A. B., Passos, E. A., & Alves, J. P. H. (2010). Concentrations and geochemical associations of Pb and Zn in sediments of the river São Francisco impacted by wastes from industrial zinc production. Quimica Nova, 33(10), 2088–2092.CrossRefGoogle Scholar
- Gomez-Ariza, J. L., Giraldez, I., Sanchez-Rodas, D. E., & Morales, E. (2000). Metal sequential extraction procedure optimized for heavy metal polluted and iron-oxide rich sediments. Analytica Chimica Acta, 414, 151–164.CrossRefGoogle Scholar
- Ikem, A., Egiebor, N. O., & Nyavor, K. (2003). Trace elements in water, fish and sediment from Tuskegee Lake, Southeastern USA. Water, Air, and Soil Pollution, 149(1-4), 51–75.CrossRefGoogle Scholar
- Jain, C. K. (2004). Metal fractionation study on bed sediments of River Yamuna, India. Water Research, 38, 569–578.CrossRefGoogle Scholar
- Kersten, M., & Frostner, U. (1986). Chemical fractionation of heavy metals in anoxic estuaries and coastal sediments. Water Science and Technology, 18, 121–130.Google Scholar
- Lin, J. G., Chen, S. Y., & Su, C. R. (2003). Assessment of sediment toxicity by metal speciation in different particle size fractions of river sediment. Water Science and Technology, 47(7-8), 233–241.Google Scholar
- Margui, E., Salvado, V., Queralt, I., & Hidalgo, M. (2004). Comparison of three-stage sequential extraction and toxicity characteristic leaching tests to evaluate metal mobility in mining wastes. Analytica Chimica Acta, 524(1-2), 151–159.CrossRefGoogle Scholar
- Nemati, K., Abu Bakar, N. K., & Abas, M. R. (2009). Investigation of heavy metals mobility in shrimp aquaculture sludge—comparison of two sequential extraction procedures. Microchemical Journal, 91, 227.CrossRefGoogle Scholar
- Okoro, H.K., Fatoki, O.S., Adekola, F.A., Ximba, B.J., Snyman, R.G. (2012). A review of sequential extraction procedures for heavy metals speciation in soil and sediments. 1: 181. doi: 10.4172/scientificreports.181
- Oregioni, B., Aston, S.R. (1984). Determination of selected trace metals in marine sediments by flame/flameless atomic absorption spectrophotometer. IAEA Monaco Laboratory Internal Report. Now cited in reference method in pollution studies No. 38, UNEP, 1986.Google Scholar
- Perin, G. Craboledda, L., Lucchese, M., Cirillo,R. Dotta,L., Zanette, M., Orio,A. (1985). Heavy metals speciation in the sediments of Northern Adriatic Sea. A new approach for environmental toxicity determination. In: Lekkas, T.D. (E.d.), Heavy metals in the environment, vol. 21, pp.454-456.Google Scholar
- Sekaly, A. L. R., Mandal, R., Nouri, M. H., Murimboh, J., Chakrabart, C. L., Back, M. H., Gregoire, D. C., & Schroeder, W. H. (1999). Effect of metal/fulvic acid mole ratios on the binding of Ni (II), Pb (II), Cu (II), Cd (II), and Al (III) by two well characterized fulvic acids in aqueous model solutions. Analytica Chimica Acta, 402, 211–221.CrossRefGoogle Scholar
- Sundaray, S.K. (2007). Water quality assessment of Mahanadi River, Orissa, India using multivariate statistical approach. Ph.D. Thesis, Utkal University, Bhubaneswar, India.Google Scholar
- Tack, F. M., & Verloo, M. G. (1995). Chemical speciation and fractionation in soil and sediment heavy metal analysis: a review. International Journal of Environmental Analytical Chemistry., 59(2-4), 225–238.CrossRefGoogle Scholar
- Tessier, A., Campbell, P. G. C., & Biason, M. (1979). Sequential extraction procedure for speciation of particulate trace metals. Journal of Analytical Chemistry, 51(7), 844–851.CrossRefGoogle Scholar
- Ure, A. M., Quevauviller, V., Muntau, H., & Griepink, B. (1993). Speciation of heavy metals in solids and harmonization of extraction techniques undertaken under the auspices of the BCR of the Commission of the European Communities. International Journal of Environmental Analytical Chemistry, 51, 135.CrossRefGoogle Scholar
- Uzairu, A., Harrison, G. F. S., Balarabe, M. L., & Nnaji, J. C. (2009). Concentration levels of trace metals in fish and sediment from Kubanni river, northern Nigeria. Bulletin of the Chemical Society of Ethiopia, 23(1), 9–17.CrossRefGoogle Scholar
- Zakir, H. M., & Shikazono, N. (2011). Environmental mobility and geochemical partitioning of Fe, Mn, Co, Ni and Mo in sediments of an urban river. Journal of Environmental Chemistry and Ecotoxicology, 3, 116–126.Google Scholar
- Zdenek, B. (1996). Evaluation of the concentration of trace elements in stream sediments by factor and analysis and the sequential extraction procedure. Science of the Total Environment, 177, 237–250.CrossRefGoogle Scholar