Advertisement

Cluster Computing

, Volume 22, Supplement 5, pp 12777–12783 | Cite as

An efficient and low power impulsive noise suppressor architecture for OFDM system

  • N. Manikanda DevarajanEmail author
  • M. Chandrasekaran
Article
  • 55 Downloads

Abstract

Orthogonal frequency division multiplexing is wireless communication technology which is used for high reliable and high datarate communication. The conventional OFDM system is often affected by noise contents when the symbols are passed through frequency selective fading channel.This paper proposes low power impulsive noise suppressor architecture for detecting and suppressing the noise contents in the received OFDM symbols.This proposed impulsive noise suppression architecture consumes less hardware resources and consumes low power. The proposed system is designed using Verilog high definition language and synthesized in Xilinx Project Navigator 12.1i.

Keywords

OFDM Low power Channel Impulsive noise Fading 

References

  1. 1.
    Mirza, A., Kabir, S.M., Sheikh, S.A.: Reduction of impulsive noise in OFDM systems using a hybrid method. Int. J. Signal Process. Syst. 4(3) (2016)Google Scholar
  2. 2.
    JiaJia, J.M.: A dual protection scheme for impulsive noise suppression in OFDM systems. Int. J. Electron. Commun. 68(1), 51–58 (2014)CrossRefGoogle Scholar
  3. 3.
    Ragheb, N., Kim, H.W.: Noise cancellation techniques based on frequency selection OFDM and instrumentation sensing circuit for large touch screens. In: 28th International Conference on Microelectronics (ICM) (2016)Google Scholar
  4. 4.
    Radić, J., Rožić, N.: Adaptive impulse noise suppression in OFDM systems. Eclectron. Electr. Eng. 97(1), 3–8 (2010)Google Scholar
  5. 5.
    Mathew, M.E., Jeevitha, J., Reethu, K., Chacko, A.: Performance improvement in OFDM system with interleaving and blanking over impulse noise environment. Int. J. Eng. Trends Technol. 9(7) (2014)Google Scholar
  6. 6.
    Zhao, Y., Häggman, S.G.: Intercarrier interference self-cancellation scheme for OFDM mobile communication systems. IEEE Trans. Commun. 49(7), 1185–1191 (2001)Google Scholar
  7. 7.
    Lee, H.C., Chen, C.W., Wei, S.W.: Channel estimation for OFDM system with two training symbols aided and polynomial fitting. IEEE Trans. Commun. 58(3), 733–736 (2010)CrossRefGoogle Scholar
  8. 8.
    Myllylä, M., Juntti, M., Cavallaro, J.R.: Implementation aspects of list sphere decoder algorithms for MIMO-OFDM systems. Signal Process. 90(10), 2863–2876 (2010)CrossRefGoogle Scholar
  9. 9.
    Boher, L., Rabineau, R., H’elard, M.: FPGA implementation of an iterative receiver for MIMO-OFDM systems. IEEE J. Sel. Areas Commun. 26(6), 857–866 (2008)CrossRefGoogle Scholar
  10. 10.
    Lee, H., Lee, B., Lee, I.: Iterative detection and decoding with an improved V-BLAST for MIMO-OFDM systems. IEEE J. Sel. Areas Commun. 24(3), 504–513 (2006)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Electronics and Communication EngineeringVMKV Engineering CollegeSalemIndia
  2. 2.Government College of EngineeringBargurIndia

Personalised recommendations