Cluster Computing

, Volume 22, Supplement 2, pp 4129–4134 | Cite as

Clock node capacity minimization using lookup table based controller for ultrasound and medical imaging processor

  • T. Joby TitusEmail author
  • V. Vijayakumari


Low power system on-chip design without performance degradation is the most critical design issue for the processor involved in medical image diagnosis. To make the medical device portable, it is necessary to reduce the processor size with less power consumption. The performance of the chip is affected drastically due to rise in temperature produced by unnecessary internal switching. Hence it is necessary for power optimization and minimizing unnecessary switching. In our proposed work, an efficient level shifting scheme of clock signal can be achieved by utilizing lookup table based level conversion scheme in clock node. The switching activity is verified for various logic network using multi-level conversion scheme with Conditional Capture technique and Improved Conditional Capture technique. It ensures the power saving by turning on a functional logic block only when required and minimizes the unnecessary clock node activity. This paper analyzes the proposed work in 0.6 \(\upmu \)m, 50 n CMOS processor and compares the results with the existing power and delay optimization techniques as it is widely applicable for image analysis.


Clock gating Conditional capture Lookup table Clustered voltage scaling (CVS) Sequential circuits 


  1. 1.
    Lukefahr, A., Padmanabha, S., Das, R., Dreslinski, R., Wenisch, T.F., Mahlke, S.: Heterogeneous microarchitectures trump voltage scaling for low-power cores. In: PACT ’14 Proceedings of the 23rd International Conference on Parallel Architectures and Compilation, pp. 237–250 (2014)Google Scholar
  2. 2.
    Lin, H.-T., Chang, Y.-L., et al.: Pulsed latch utilization for clock tree optimization. IEEE Trans. VLSI 22(4), 721–733 (2014)Google Scholar
  3. 3.
    Wimer, S., Korean, I.: Design flow for flip-flop grouping in data-driven clock gating. IEEE Trans. VLSI 22(4), 771–778 (2014)Google Scholar
  4. 4.
    Hyman, R., et al.: A clock control strategy for peak power and rms current reduction using path clustering. IEEE Trans. VLSI 21(2), 259–269 (2013)Google Scholar
  5. 5.
    Shyn, Y.-T., et al.: Effective and efficient approach for power reduction by using multibit fliflops. IEEE Trans. VLSI Syst. 21(4), 624–635 (2013)Google Scholar
  6. 6.
    Ghosh, A., et al.: Slew-rate monitoring circuit for on-chip process variation detection. IEEE Trans. VLSI Syst. 21(9), 1683–1692 (2013)Google Scholar
  7. 7.
    Lu, J., et al.: A reconfigurable clock polarity assignment flow for clock gated designs. IEEE Trans. VLSI Syst. 20(6), 1002–1011 (2012)Google Scholar
  8. 8.
    Kuruveettil, H., et al.: Analog front end low noise amplifier in 0.18-\(\mu \)mCMOS for ultrasound imaging applications. Int. J. Electr. Comput. Energ. Electron. Commun. Eng. 7(9), 1168–1172 (2013)Google Scholar
  9. 9.
    Ding, R.-T., et al.: Cell based process resilient multiphase clock generation. IEEE Trans. VLSI Syst. 21(12), 2348–2352 (2013)Google Scholar
  10. 10.
    Xu, H., et al.: Timing uncertainity in 3-D clock trees due to process variation and power supply noise. IEEE Trans. VLSI Syst. 21(12), 2226–2239 (2013)Google Scholar
  11. 11.
    Itan, I., et al.: Simplifying clock gating logic by matching factored forms. IEEE Trans. VLSI Syst. 22(6), 1338–1349 (2014)Google Scholar
  12. 12.
    Wimer, S., et al.: The optimal fan-out of clock network for power minimization by adaptive gating. IEEE Trans. VLSI Syst. 20(10), 1772–1780 (2012)Google Scholar
  13. 13.
    Hu, X.: Modeling and analysis of power distribution networks in 3-D IC’S. IEEE Trans. VLSI Syst. 21(2), 354–366 (2013)Google Scholar
  14. 14.
    Pei, S., et al.: A ligh precision on-chip path delay measurement architecture. IEEE Trans. VLSI Syst. 20(9), 1565–1577 (2012)Google Scholar
  15. 15.
    Katoh, K.: An on-chip delay measurement technique using signature registers for small-delay defect detection. IEEE Trans. VLSI Syst. 20(5), 804–817 (2012)Google Scholar
  16. 16.
    Lu, J.: Fast power and slew- aware gated clock tree synthesis. IEEE Trans. VLSI Syst. 20(11), 2094–2103 (2012)Google Scholar
  17. 17.
    Yin, J.K.: Jitter analysis of polyphase filter-based multiphase clock in frequency multiplier. IEEE Trans. VLSI Syst. 20(8), 1373–1382 (2012)Google Scholar
  18. 18.
    Kulkarni, N.: Reducing power leakage and area of standard cell asics using threshold logic flipflops. IEEE Trans. VLSI Syst. 24(9), 2873–2886 (2016)Google Scholar
  19. 19.
    Bezati, E., et al.: Clock gating of streaming applications for energy efficient implementations on FPGA. IEEE Trans. VLSI Syst. 36(4), 699–703 (2017)Google Scholar
  20. 20.
    Alam, M.-R.: Power efficient high level synthesis by centralized and fine grained clock gating. IEEE Trans. Comput. Aided Des. Integr. Circ. Syst. 34(12), 1954–1963 (2015)Google Scholar
  21. 21.
    Cakmakci, Y.: Cyclic power-gating as an alternative to voltage and frequency scaling. IEEE Trans. Comput. Archit. 12(2), 77–80 (2016)Google Scholar
  22. 22.
    Varkey, N.P., Arumugam, S.: Automatic video object extraction by using generalized visual and motion saliency. Int. J. Innov. Sci. Eng. Res. (IJISER) 1(4), 271–275 (2014)Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Electronics and Communication EngineeringSri Ramakrishna Institute of TechnologyCoimbatoreIndia
  2. 2.Department of ECECoimbatore Institute of Engineering and TechnologyCoimbatoreIndia

Personalised recommendations