Advertisement

Cellulose

pp 1–15 | Cite as

Fabrication and performance characterization of the membrane from self-dispersed gelatin-coupled cellulose microgels

  • Yijun Yao
  • Hongru WangEmail author
  • Ruirui Wang
  • Yong Chai
  • Wanli Ji
Original Research
  • 11 Downloads

Abstract

A new gelatin-coupled cellulose (GCC) microgel system was successfully prepared in NaOH/urea aqueous solution with epichlorohydrin (ECH) as a coupling agent via dialysis and self-dispersion pathway. The structure and property of the microgel and its membrane were characterized by elemental analysis, dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectra, gel permeation chromatography (GPC), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). It was concluded that successful coupling interactions occurred between cellulose and gelatin during the fabrication process, and the weight-average molecular weight of GCC microgel was up to 636.60 kDa with polydispersity index (PDI) of 1.015 approximately. The crystalline structure of the modified cellulose was destroyed, leading to GCC product self-dispersed in water in the absence of NaOH and urea. The GCC microgels had whisker-like structure, and their Z-average particle sizes were approximately 86.1 nm–150.2 nm and decreased with the increases of the gelatin content (WGel). In comparison with the water contact angle, swelling behavior and thermostability of the existing water-soluble cellulose derivative, the microgel membranes exhibited better water resistance and thermal resistance properties.

Graphical abstract

Keywords

Gelatin-coupled cellulose Microgel Dialysis Self-dispersion 

Notes

Acknowledgments

This work was supported by the Hongliang Research Fund (413118) and Doctor Research Fund of Shaanxi University of Science and Technology.

Supplementary material

10570_2019_2263_MOESM1_ESM.docx (81 kb)
Supplementary material 1 (DOCX 81 kb)

References

  1. Banerjee I, Mishra D, Maiti T (2009) PLGA microspheres incorporated gelatin scaffold: microspheres modulate scaffold properties. Int J Biomater 2009:1–9Google Scholar
  2. Cai J, Zhang L (2005) Rapid dissolution of cellulose in LiOH/Urea and NaOH/Urea aqueous solutions. Macromol Biosci 5:539–548Google Scholar
  3. Cai J, Liu Y, Zhang L (2006) Dilute solution properties of cellulose in LiOH/urea aqueous system. J Polym Sci Part B Polym Phys 44:3093–3101Google Scholar
  4. Ciolacu D, Rudaz C, Vasilescu M, Budtova T (2016) Physically and chemically cross-linked cellulose cryogels: structure, properties and application for controlled release. Carbohyd Polym 151:392–400Google Scholar
  5. Ding C, Zhang M, Li G (2015) Preparation and characterization of collagen/hydroxypropyl methylcellulose (HPMC) blend film. Carbohyd Polym 119:194–201Google Scholar
  6. Duan H, Shao Z, Zhao M, Zhou Z (2016) Preparation and properties of environmental-friendly coatings based on carboxymethyl cellulose nitrate ester & modified alkyd. Carbohyd Polym 137:92–99Google Scholar
  7. Eriksson J, Malmsten M, Tiberg F, Callisen T, Damhus T (2005) Enzymatic degradation of model cellulose films. J Colloid Interface Sci 284(1):99–106Google Scholar
  8. Esteghlal S, Niakosari M, Hosseini S, Mesbahi G, Yousefi G (2016) Gelatin-hydroxypropyl methylcellulose water-in-water emulsions as a new bio-based packaging material. Int J Biol Macromol 86:242–249Google Scholar
  9. Farzamfar S, Naseri N, Vaez A, Esmaeilpour F, Ehterami A, Sahrapeyma H (2017) Neural tissue regeneration by a gabapentin-loaded cellulose acetate/gelatin wet-electrospun scaffold. Cellulose 25(2):1229–1238Google Scholar
  10. French A (2014) Idealized powder diffraction patterns for cellulose polymorphs. Cellulose 21:885–896Google Scholar
  11. Ge W, Guo Y, Zhong H (2015) Synthesis, characterization and micellar behaviors of hydroxyethyl cellulose-graft-poly(lactide/e-caprolactone/p-dioxanone). Cellulose 22(4):2365–2374Google Scholar
  12. Geng H (2018) A one-step approach to make cellulose-based hydrogels of various transparency and swelling degrees. Carbohyd Polym 186:208–216Google Scholar
  13. Guo Y, Wang X, Shu X, Shen Z, Sun R (2012) Self-assembly and paclitaxel loading capacity of cellulose-graft-poly(lactide) nanomicelles. J Agric Food Chem 60(15):3900–3908Google Scholar
  14. Guo Y, Wang X, Shen Z, Shu X, Sun R (2013) Preparation of cellulose-graft-poly(ε-caprolactone) nanomicelles by homogeneous ROP in ionic liquid. Carbohyd Polym 92(1):77–83Google Scholar
  15. Hu H, You J, Gan W, Zhou J, Zhang L (2015) Synthesis of allyl cellulose in NaOH/urea aqueous solutions and its thiol-ene click reactions. Polym Chem 6:3543–3548Google Scholar
  16. Ifuku S, Kadla JF (2009) Preparation of a thermosensitive highly regioselective cellulose/N-isopropylacrylamide copolymer through atom transfer radical polymerization. Biomacromolecules 9(11):3308–3313Google Scholar
  17. Jiang F, Hsieh Y (2016) Self-assembling of TEMPO oxidized cellulose nanofibrils as affected by protonation of surface carboxyls and drying methods. ACS Sustain Chem Eng 4:1041–1049Google Scholar
  18. Karlsson K, Schuster E, Stading M, Rigdahl M (2015) Foaming behavior of water-soluble cellulose derivatives: hydroxypropyl methylcellulose and ethyl hydroxyethyl cellulose. Cellulose 22(4):2651–2664Google Scholar
  19. Kirdponpattara S, Phisalaphong M, Kongruang S (2017) Gelatin-bacterial cellulose composite sponges thermally cross-linked with glucose for tissue engineering applications. Carbohyd Polym 177:361–368Google Scholar
  20. Klemm D, Heublein B, Fink H, Bohn A (2005) Cellulose: faszinierendes biopolymer und nachhaltiger rohstoff. Angew Chem 117(22):3422–3458Google Scholar
  21. Liu Y, Jin X, Zhang X, Han M, Ji S (2015) Self-assembly and chiroptical property of poly(N-acryloyl-L-amino acid) grafted celluloses synthesized by RAFT polymerization. Carbohyd Polym 117:312–318Google Scholar
  22. Lu Y, Yuan W (2018) Superhydrophobic three-dimensional porous ethyl cellulose absorbent with micro/nano-scale hierarchical structures for highly efficient removal of oily contaminants from water. Carbohyd Polym 191:86–94Google Scholar
  23. Ma S, Song G, Feng N (2012) Preparation and characterization of self-emulsified waterborne nitrocellulose. Carbohyd Polym 89:36–40Google Scholar
  24. Ma Y, Zhou G, Ding J, Li S, Wang G (2018) Preparation and characterization of an agglomeration-cementing agent for dust suppression in open pit coal Mining. Cellulose 25:4011–4029Google Scholar
  25. Maciejewski B, Weitschies W, Schneider F, Sznitowska M (2017) Gastroresistant gelatin films prepared by addition of cellulose acetate phthalate. Pharmazie 72(6):324–328Google Scholar
  26. Navarra M, Bosco C, Moreno J, Vitucci F, Paolone A, Panero S (2015) Synthesis and characterization of cellulose-based hydrogels to be used as gel electrolytes. Membranes 5(4):5810–5823Google Scholar
  27. Ooi S, Ahmad I, Amin M (2015) Cellulose nanocrystals extracted from rice husks as a reinforcing material in gelatin hydrogels for use in controlled drug delivery systems. Ind Crops Prod 93:227–234Google Scholar
  28. Pei Y, Yang J, Liu P, Xu M, Zhang X, Zhang L (2013) Fabrication, properties and bioapplications of cellulose/collagen hydrolysate composite films. Carbohyd Polym 92:1752–1760Google Scholar
  29. Pei Y, Ye D, Zhao Q, Wang X, Zhang C (2015) Effectively promoting wound healing with cellulose/gelatin sponges constructed directly from a cellulose solution. J Mater Chem B 3:7518–7528Google Scholar
  30. Qi H, Liebert T, Meister F, Heinze T (2009) Homogenous carboxymethylation of cellulose in the NaOH/urea aqueous solution. React Funct Polym 69:779–784Google Scholar
  31. Qin X, Lu A, Zhang L (2013) Gelation behavior of cellulose in NaOH/urea aqueous system via cross-linking. Cellulose 20:1669–1677Google Scholar
  32. Qiu X, Tao S, Ren X, Hu S (2012) Modified cellulose films with controlled permeatability and biodegradability by crosslinking with toluene diisocyanate under homogeneous conditions. Carbohyd Polym 88:1272–1280Google Scholar
  33. Quero F, Coveney A, Lewandowska A, Richardson R, Calderón P, Lee K, Eichhorn S, Alam M, Enrione J (2015) Stress transfer quantification in gelatin-matrix natural composites with tunable optical properties. Biomacromolecules 16:1784–1793Google Scholar
  34. Quero F, Padilla C, Campos V, Luengo J, Caballero L, Melo F, Li Q, Eichhorn S, Enrione J (2018) Stress transfer and matrix-cohesive fracture mechanism in microfibrillated cellulose-gelatin nanocomposite films. Carbohyd Polym 195:89–98Google Scholar
  35. Song Y, Sun Y, Zhang X, Zhou J, Zhang L (2008) Homogeneous quaternization of cellulose in NaOH/Urea aqueous solutions as gene carriers. Biomacromolecules 9:2259–2264Google Scholar
  36. Su X, Zhao Q, Zhang D, Dong W (2015) Synthesis and membrane performance characterization of self-emulsified waterborne nitrocellulose dispersion modified with castor oil. Appl Surf Sci 356:610–614Google Scholar
  37. Su X, Zhang Y, Zhao D, Chen Z (2017) Synthesis and characterization of carboxylate waterborne cellulose emulsion based on cellulose acetate. Cellulose 24(5):1–9Google Scholar
  38. Sui X, Yuan J, Zhou M, Zhang J, Yang H (2008) Synthesis of cellulose-graft-poly(N,N-dimethylamino-2-ethyl methacrylate) copolymers via homogeneous ATRP and their aggregates in aqueous media. Biomacromolecules 9(10):2615–2620Google Scholar
  39. Sun N, Wang T, Yan X (2017) Self-assembled supermolecular hydrogel based on hydroxyethyl cellulose: formation, in vitro release and bacteriostasis application. Carbohyd Polym 172:49–59Google Scholar
  40. Suzuki T, Kono K, Shimomura K, Minami H (2014) Preparation of cellulose particles using an ionic liquid. J Colloid Interface Sci 418:126–131Google Scholar
  41. Theerawitayaart W, Prodpran T, Benjakul S, Sookchoo P (2019) Properties of films from fish gelatin prepared by molecular modification and direct addition of oxidized linoleic acid. Food Hydrocolloids 88:291–300Google Scholar
  42. Tristram CJ, Mason JM, Williams DB, Hinkley SF (2015) Doubly renewable cellulose polymer for water-based coatings. ChemSusChem 8(1):63–66Google Scholar
  43. Wang B, Lv X, Chen S, Li Z, Yao J (2017) Bacterial cellulose/gelatin scaffold loaded with VEGF-silk fibroin nanoparticles for improving angiogenesis in tissue regeneration. Cellulose 24(11):5013–5024Google Scholar
  44. Xia G, Wan J, Zhang J, Zhang X, Xu L, Wu J (2016) Cellulose-based films prepared directly from waste newspapers via an ionic liquid. Carbohyd Polym 151:223–229Google Scholar
  45. Xu F, Zhu Y, Liu F, Nie J, Ma J (2010) Comb-shaped conjugates comprising hydroxypropyl cellulose backbones and low-molecular-weight poly(N-isopropylacryamide) side chains for smart hydrogels: synthesis, characterization, and biomedical applications. Bioconjug Chem 21(3):456–464Google Scholar
  46. Yang Q, Lv A, Qi H, Sun Y, Zhang X, Zhang L (2009) Properties and bioapplications of blended cellulose and corn protein films. Macromol Biosci 9:849–856Google Scholar
  47. Yang X, Liu G, Peng L, Guo J, Tao L (2017) Highly efficient self-healable and dual responsive cellulose-based hydrogels for controlled release and 3D cell culture. Adv Func Mater 27(40):1–10Google Scholar
  48. You J, Zhao L, Wang G, Zhou H, Zhou J, Zhang L (2014) Quaternized cellulose-supported gold nanoparticles as capillary coatings to enhance protein separation by capillary electrophoresis. J Chromatogr A 1343:160–166Google Scholar
  49. Yuan Z, Zhang J, Jiang A, Lv W, Wang Y, Geng H (2015) Fabrication of cellulose self-assemblies and high-strength ordered cellulose films. Carbohyd Polym 117:414–421Google Scholar
  50. Zhang X, Weeks BL (2014) Preparation of sub-micron nitrocellulose particles for improved combustion behavior. J Hazard Mater 268:224–228Google Scholar
  51. Zhang X, Liu X, Zheng W, Zhu J (2012) Regenerated cellulose/graphene nanocomposite films prepared in DMAC/LiCl solution. Carbohyd Polym 88:26–30Google Scholar
  52. Zhang D, Zhang N, Song P, Hao J, Wan Y (2018a) Functionalized cellulose beads with three dimensional porous structure for rapid adsorption of active constituents from Pyrola incarnata. Carbohyd Polym 181:560–569Google Scholar
  53. Zhang Y, Jiang Y, Han L, Wang B, Xu H (2018b) Biodegradable regenerated cellulose-dispersed composites with improved properties via a pickering emulsion process. Carbohyd Polym 179:86–92Google Scholar
  54. Zhao Y, He M, Zhao L, Wang S, Li Y (2016) Epichlorohydrin-cross-linked hydroxyethyl cellulose/soy protein isolate composite films as biocompatible and biodegradable implants for tissue engineering. ACS Appl Mater Interfaces 8:2781–2795Google Scholar
  55. Zhou J, Zhang L, Deng Q, Wu X (2004) Synthesis and characterization of cellulose derivatives prepared in NaOH/Urea aqueous solutions. J Polym Sci Part A Polym Chem 42:5911–5920Google Scholar
  56. Zhou J, Qin Y, Liu S, Zhang L (2006) Homogenous synthesis of hydroxyethylcellulose in NaOH/Urea aqueous solution. Macromol Biosci 6:84–89Google Scholar
  57. Zhou J, Xu Y, Wang X, Qin Y, Zhang L (2008) Microstructure and aggregation behavior of methylcelluloses prepared in NaOH/urea aqueous solutions. Carbohyd Polym 74:901–906Google Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  • Yijun Yao
    • 1
  • Hongru Wang
    • 1
    Email author
  • Ruirui Wang
    • 1
  • Yong Chai
    • 1
  • Wanli Ji
    • 1
  1. 1.College of Bioresources Chemical and Materials EngineeringShaanxi University of Science and TechnologyXi’anChina

Personalised recommendations