Advertisement

Cellulose

pp 1–15 | Cite as

An eco-friendly method to enhance optical and electrical properties of conducting polymers by means of carboxymethyl cellulose

  • Tugba Soganci
  • Metin AkEmail author
Original Research
  • 34 Downloads

Abstract

In this work, an eco-friendly method is proposed for the electro-synthesis of conductive polymers with superior optical and electrical properties by means of CMC in aqueous media. For this purpose, an aqueous dispersion of a water-insoluble monomer namely 4-amino-N-[2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl]benzamide (TPB) has been prepared by attaching it to CMC via hydrogen bonds and the conductive composite film (PTPB–CMC) has been obtained by electropolymerization. The TPB monomer has been chosen to interact with the CMC via hydrogen bonds which ensures to obtain dispersion with the CMC and also increase the compatibility of its polymer in the composite structure. As a result of the electrochemical, spectroelectrochemical investigation and surface morphology analyses of the obtained conductive polymer, it has been found that anionic CMC makes improvements in the electrical, optical and mechanical properties of the polymer by making the plasticizing effect and acting as a dopant. Furthermore, in the presence of nanocarbon materials on electrode surface, it has been determined that the polymerization potential is reduced and more stable and long-lasting polymeric films which are crucial for technological applications have been obtained.

Keywords

Electrochemical polymerization Carboxymethyl cellulose Conducting polymers Composite materials 

Notes

Acknowledgments

This work was supported by the BAGEP Award of the Science Academy. Dr. T. Soganci thank to DOSAP program of the Pamukkale University.

References

  1. Ahmad NHB, Isa MINBM (2015) Proton conducting solid polymer electrolytes based carboxymethyl cellulose doped ammonium chloride: ionic conductivity and transport studies. Int J Plast Technol 19:47–55.  https://doi.org/10.1007/s12588-015-9110-7 CrossRefGoogle Scholar
  2. Ahmad NH, Isa MIN (2016) Characterization of un-plasticized and propylene carbonate plasticized carboxymethyl cellulose doped ammonium chloride solid biopolymer electrolytes. Carbohydr Polym 137:426–432.  https://doi.org/10.1016/j.carbpol.2015.10.092 CrossRefGoogle Scholar
  3. Ak M, Cetişli H, Toppare L (2013) Blend or copolymer? spectroelectrochemical evidence of copolymerization and blending of two electrochromic monomers. Colloid Polym Sci.  https://doi.org/10.1007/s00396-012-2787-7 Google Scholar
  4. Aldalbahi A, Feng P, Alhokbany N et al (2016) Synthesis, characterization, and CH4-sensing properties of conducting and magnetic biopolymer nano-composites. J Environ Chem Eng 4:2841–2847.  https://doi.org/10.1016/j.jece.2016.05.028 CrossRefGoogle Scholar
  5. Ayranci R, Demirkol DO, Timur S, Ak M (2017) Rhodamine-based conjugated polymers: potentiometric, colorimetric and voltammetric sensing of mercury ions in aqueous medium. Analyst 1:10.  https://doi.org/10.1039/c7an00606c Google Scholar
  6. Bella F, Nair JR, Gerbaldi C (2013) Towards green, efficient and durable quasi-solid dye-sensitized solar cells integrated with a cellulose-based gel-polymer electrolyte optimized by a chemometric DoE approach. RSC Adv 3:15993–16001.  https://doi.org/10.1039/C3RA41267A CrossRefGoogle Scholar
  7. Bingol BE, Tekin B, Carbas BB (2017) An investigation on electrochromic properties of new copolymers based on dithienylpyrrole and propylenedioxythiophene. J Electroanal Chem 806:107–115.  https://doi.org/10.1016/j.jelechem.2017.10.050 CrossRefGoogle Scholar
  8. Chang K-H, Wang HP, Wu T-Y, Sun IW (2014) Optical and electrochromic characterizations of four 2,5-dithienylpyrrole-based conducting polymer films. Electrochim Acta 119:225–235.  https://doi.org/10.1016/j.electacta.2013.11.174 CrossRefGoogle Scholar
  9. Çilgi GK, Karakuş M, Ak M (2013) Ferrocenyl dithiophosphonate functionalized inorganic–organic hybrid conductive polymer with green color in neutral state. Synth Met 180:25–31.  https://doi.org/10.1016/j.synthmet.2013.07.017 CrossRefGoogle Scholar
  10. Crini G (2005) Recent developments in polysaccharide-based materials used as adsorbents in wastewater treatment. Prog Polym Sci 30:38–70.  https://doi.org/10.1016/j.progpolymsci.2004.11.002 CrossRefGoogle Scholar
  11. Dai Y, Li W, Qu X et al (2017) Electrochemistry, electrochromic and color memory properties of polymer/copolymer based on novel dithienylpyrrole structure. Electrochim Acta 229:271–280.  https://doi.org/10.1016/j.electacta.2017.01.156 CrossRefGoogle Scholar
  12. Duvail J-L, Rétho P, Godon C et al (2003) Physical properties of conducting polymer nanofibers. Synth Met 135–136:329–330.  https://doi.org/10.1016/S0379-6779(02)00626-4 CrossRefGoogle Scholar
  13. Gautam V, Singh KP, Yadav VL (2018) Preparation and characterization of green-nano-composite material based on polyaniline, multiwalled carbon nano tubes and carboxymethyl cellulose: for electrochemical sensor applications. Carbohydr Polym 189:218–228.  https://doi.org/10.1016/j.carbpol.2018.02.029 CrossRefGoogle Scholar
  14. Göktuǧ Ö, Soganci T, Ak M, Kasim Şener M (2017) Efficient synthesis of EDOT modified ABBB-type unsymmetrical zinc phthalocyanine: optoelectrochromic and glucose sensing properties of its copolymerized film. New J Chem 41:14080–14087.  https://doi.org/10.1039/c7nj03250a CrossRefGoogle Scholar
  15. Grigoras M, Antonoaia NC (2005) Poly(arylenevinylene)s—methods of synthesis. Rev Roum Chim 50:245–256Google Scholar
  16. Guo C, Zhou L, Lv J (2013) Effects of expandable graphite and modified ammonium polyphosphate on the flame-retardant and mechanical properties of wood flour-polypropylene composites. Polym Polym Compos 21:449–456.  https://doi.org/10.1002/app Google Scholar
  17. Guven N, Camurlu P (2015) Electrosyntheses of anthracene clicked poly(thienylpyrrole)s and investigation of their electrochromic properties. Polymer (Guildf) 73:122–130.  https://doi.org/10.1016/j.polymer.2015.07.005 CrossRefGoogle Scholar
  18. Guzel M, Soganci T, Karatas E, Ak M (2018) Donor-acceptor type super-structural triazine cored conducting polymer containing carbazole and quinoline for high-contrast electrochromic device. J Electrochem Soc 165:316–323.  https://doi.org/10.1149/2.1201805jes CrossRefGoogle Scholar
  19. Higashimura H (2012) Oxidative coupling polymerization. In: Matyjaszewski K, Möller M (eds) Polymer science: a comprehensive reference, vol 5. Elsevier, pp 141–173.  https://doi.org/10.1016/B978-0-444-53349-4.00136-9
  20. Kiristi M, Bozduman F, Gulec A et al (2014) Complementary all solid state electrochromic devices using carboxymethyl cellulose based electrolytes. J Macromol Sci Part A 51:481–487.  https://doi.org/10.1080/10601325.2014.906258 CrossRefGoogle Scholar
  21. Klemm D, Heublein B, Fink HP, Bohn A (2005) Cellulose: fascinating biopolymer and sustainable raw material. Angew Chem Int Ed 44:3358–3393.  https://doi.org/10.1002/anie.200460587 CrossRefGoogle Scholar
  22. Kline RJ, McGehee MD, Kadnikova EN et al (2005) Dependence of regioregular poly(3-hexylthiophene) film morphology and field-effect mobility on molecular weight. Macromolecules 38:3312–3319.  https://doi.org/10.1021/ma047415f CrossRefGoogle Scholar
  23. Kurtay G, Soganci T, Ak M, Gullu M (2016) Synthesis and computational bandgap engineering of new 3,4-alkylenedioxypyrrole (ADOP) derivatives and investigation of their electrochromic properties. J Electrochem Soc 163:896–905.  https://doi.org/10.1149/2.0131610jes CrossRefGoogle Scholar
  24. Laska J, Widlarz J (2003) Water soluble polyaniline. Synth Met 135–136:261–262.  https://doi.org/10.1016/S0379-6779(02)00674-4 CrossRefGoogle Scholar
  25. Li J, Fang L, Tait WR et al (2017) Preparation of conductive composite hydrogels from carboxymethyl cellulose and polyaniline with a nontoxic crosslinking agent. RSC Adv 7:54823–54828.  https://doi.org/10.1039/C7RA10788A CrossRefGoogle Scholar
  26. Megha R, Ravikiran YT, Kotresh S et al (2018) Carboxymethyl cellulose: an efficient material in enhancing alternating current conductivity of HCl doped polyaniline. Cellulose 25:1147–1158.  https://doi.org/10.1007/s10570-017-1610-5 CrossRefGoogle Scholar
  27. Memio F, Öznülüer T, Ak M (2014) Conducting carbon/polymer composites as a catalyst support for proton exchange membrane fuel cells. Int J Energy Res.  https://doi.org/10.1002/er.3126 Google Scholar
  28. Notake K, Gunji T, Kokubun H et al (2016) The application of a water-based hybrid polymer binder to a high-voltage and high-capacity Li-rich solid-solution cathode and its performance in Li-ion batteries. J Appl Electrochem 46:267–278.  https://doi.org/10.1007/s10800-016-0930-8 CrossRefGoogle Scholar
  29. Noureen S, Caramori S, Monari A et al (2012) Strong π-delocalization and substitution effect on electronic properties of dithienylpyrrole-containing bipyridine ligands and corresponding ruthenium complexes. Dalt Trans 41:4833–4844.  https://doi.org/10.1039/C2DT12367C CrossRefGoogle Scholar
  30. Okada M (2002) Chemical syntheses of biodegradable polymers. Prog Polym Sci 27:87–133.  https://doi.org/10.1016/S0079-6700(01)00039-9 CrossRefGoogle Scholar
  31. Olgac R, Soganci T, Baygu Y et al (2017) Zinc(II) phthalocyanine fused in peripheral positions octa-substituted with alkyl linked carbazole: synthesis, electropolymerization and its electro-optic and biosensor applications. Biosens Bioelectron 98:202–209.  https://doi.org/10.1016/j.bios.2017.06.028 CrossRefGoogle Scholar
  32. Ozturk Kirbay F, Ayranci R, Ak M et al (2017) Rhodamine functionalized conducting polymers for dual intention: electrochemical sensing and fluorescence imaging of cells. J Mater Chem B.  https://doi.org/10.1039/c7tb01716b Google Scholar
  33. Peng H, Ma G, Ying W et al (2012) In situ synthesis of polyaniline/sodium carboxymethyl cellulose nanorods for high-performance redox supercapacitors. J Power Sour 211:40–45.  https://doi.org/10.1016/j.jpowsour.2012.03.074 CrossRefGoogle Scholar
  34. Qiu L, Shao Z, Liu M et al (2014) Synthesis and electrospinning carboxymethyl cellulose lithium (CMC-Li) modified 9,10-anthraquinone (AQ) high-rate lithium-ion battery. Carbohydr Polym 102:986–992.  https://doi.org/10.1016/j.carbpol.2013.09.105 CrossRefGoogle Scholar
  35. Rani MSA, Hassan NH, Ahmad A et al (2016) Investigation of biosourced carboxymethyl cellulose-ionic liquid polymer electrolytes for potential application in electrochemical devices. Ionics (Kiel) 22:1855–1864.  https://doi.org/10.1007/s11581-016-1728-8 CrossRefGoogle Scholar
  36. Reddinger JL, Reynolds JR (1999) Molecular engineering of π-conjugated polymers. Adv Polym Sci 145:59–122Google Scholar
  37. Sarrazin P, Chaussy D, Stephan O et al (2009) Adsorption of poly(3-octylthiophene) nanoparticles on cellulose fibres: effect of dispersion stability and fibre pre-treatment with carboxymethyl cellulose. Colloids Surfaces A Physicochem Eng Asp 349:83–89.  https://doi.org/10.1016/j.colsurfa.2009.07.056 CrossRefGoogle Scholar
  38. Sashiwa H, Aiba SI (2004) Chemically modified chitin and chitosan as biomaterials. Prog Polym Sci 29:887–908.  https://doi.org/10.1016/j.progpolymsci.2004.04.001 CrossRefGoogle Scholar
  39. Soganci T, Ak M, Giziroglu E (2016a) Smart window application of a new hydrazide type SNS derivative. RSC Adv.  https://doi.org/10.1039/c5ra24759d Google Scholar
  40. Soganci T, Soyleyici HC, Ak M (2016b) A soluble and fluorescent new type thienylpyrrole based conjugated polymer: optical, electrical and electrochemical properties. Phys Chem Chem Phys.  https://doi.org/10.1039/c6cp02214f Google Scholar
  41. Soganci T, Soyleyici HC, Ak M, Cetisli H (2016c) An amide substituted dithienylpyrrole based copolymer: its electrochromic properties. J Electrochem Soc 163:H59–H66.  https://doi.org/10.1149/2.0631602jes CrossRefGoogle Scholar
  42. Soganci T, Gumusay O, Soyleyici HC, Ak M (2017a) Synthesis of highly branched conducting polymer architecture for electrochromic applications. Polymer (Guildf).  https://doi.org/10.1016/j.polymer.2017.11.067 Google Scholar
  43. Soganci T, Soyleyici S, Soyleyici HC, Ak M (2017b) High contrast electrochromic polymer and copolymer materials based on amide-substituted poly(dithienyl pyrrole). J Electrochem Soc 164:H11–H20.  https://doi.org/10.1149/2.0111702jes CrossRefGoogle Scholar
  44. Soganci T, Soyleyici S, Soyleyici HC, Ak M (2017c) Optoelectrochromic characterization and smart windows application of bi-functional amid substituted thienyl pyrrole derivative. Polym (UK) 118:40–48.  https://doi.org/10.1016/j.polymer.2017.04.060 CrossRefGoogle Scholar
  45. Soganci T, Baygu Y, Kabay N et al (2018a) Comparative investigation of peripheral and nonperipheral zinc phthalocyanine-based polycarbazoles in terms of optical, electrical, and sensing properties. ACS Appl Mater Interfaces.  https://doi.org/10.1021/acsami.8b06206 Google Scholar
  46. Soganci T, Soyleyici HC, Demirkol DO et al (2018b) Use of super-structural conducting polymer as functional immobilization matrix in biosensor design. J Electrochem Soc 165:B22–B26.  https://doi.org/10.1149/2.0561802jes CrossRefGoogle Scholar
  47. Song J, Yu Z, Gordin ML et al (2015) Advanced sodium ion battery anode constructed via chemical bonding between phosphorus, carbon nanotube, and cross-linked polymer binder. ACS Nano 9:11933–11941.  https://doi.org/10.1021/acsnano.5b04474 CrossRefGoogle Scholar
  48. Söyleyici HC, Ak M, Şahin Y et al (2013) New class of 2,5-di(2-thienyl)pyrrole compounds and novel optical properties of its conducting polymer. Mater Chem Phys 142:303–310.  https://doi.org/10.1016/j.matchemphys.2013.07.019 CrossRefGoogle Scholar
  49. Tekbaşoğlu TY, Soganci T, Ak M et al (2017) Enhancing biosensor properties of conducting polymers via copolymerization: synthesis of EDOT-substituted bis(2-pyridylimino)isoindolato-palladium complex and electrochemical sensing of glucose by its copolymerized film. Biosens Bioelectron.  https://doi.org/10.1016/j.bios.2016.08.020 Google Scholar
  50. Tomasik P, Schilling CH (2004) Chemical modification of starch. Academic, London, pp 175–403Google Scholar
  51. Trojanowicz M (2003) Application of conducting polymers in chemical analysis. Microchim Acta 143:75–91.  https://doi.org/10.1007/s00604-003-0066-5 CrossRefGoogle Scholar
  52. Varaprasad K, Jayaramudu T, Sadiku ER (2017) Removal of dye by carboxymethyl cellulose, acrylamide and graphene oxide via a free radical polymerization process. Carbohydr Polym 164:186–194.  https://doi.org/10.1016/j.carbpol.2017.01.094 CrossRefGoogle Scholar
  53. Wang WB, Xu JX, Wang AQ (2011) A pH–, salt- and solvent-responsive carboxymethylcellulose-g-poly(sodium acrylate)/medical stone superabsorbent composite with enhanced swelling and responsive properties. Express Polym Lett 5:385–400.  https://doi.org/10.3144/expresspolymlett.2011.38 CrossRefGoogle Scholar
  54. Xu Y, Zhang Y (2015) Synthesis of polypyrrole/sodium carboxymethyl cellulose nanospheres with enhanced supercapacitor performance. Mater Lett 139:145–148.  https://doi.org/10.1016/j.matlet.2014.10.074 CrossRefGoogle Scholar
  55. Yigit D, Hacıoglu SO, Gullu M, Toppare L (2015) Novel poly(2,5-dithienylpyrrole) (PSNS) derivatives functionalized with azobenzene, coumarin and fluorescein chromophore units: spectroelectrochemical properties and electrochromic device applications. New J Chem 39:3371–3379.  https://doi.org/10.1039/c4nj02098g CrossRefGoogle Scholar
  56. Yu M, Li J, Wang L (2016) Preparation and characterization of magnetic carbon aerogel from pyrolysis of sodium carboxymethyl cellulose aerogel crosslinked by iron trichloride. J Porous Mater 23:997–1003.  https://doi.org/10.1007/s10934-016-0157-4 CrossRefGoogle Scholar
  57. Zhang H, Xu J, Wen Y et al (2015) Conducting poly(3,4-ethylenedioxythiophene): poly(styrene-sulfonate) film electrode with superior long-term electrode stability in water and synergistically enhanced electrocatalytic ability for application in electrochemical sensors. Synth Met 204:39–47.  https://doi.org/10.1016/j.synthmet.2015.03.010 CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  1. 1.Chemistry Department, Faculty of Art and SciencePamukkale UniversityDenizliTurkey

Personalised recommendations