Advertisement

Cellulose

pp 1–7 | Cite as

Rapid quantification of cellulose nanocrystals by Calcofluor White fluorescence staining

  • Roi Peretz
  • Hadas Mamane
  • Elizaveta Sterenzon
  • Yoram Gerchman
Original Research
  • 31 Downloads

Abstract

Cellulose nanocrystals (CNCs) have gained increased interest worldwide for their unique properties. CNC production by acid hydrolysis of cellulose-rich biomass is well established, but its' quantification is still complicated. In this study, a rapid method for the determination of CNC concentration using Calcofluor White (CW) fluorescence dye is demonstrated for both purified and homemade CNCs recovered from Whatman filter paper. The method is robust, selective for crystalline cellulose, suitable for routine measurement in CNC production and that the pH must be basic for staining using CW.

Graphical abstract

Keywords

Cellulose nanocrystals (CNC) quantification Calcofluor White Fluorescence Whatman filter paper quantification 

Notes

Acknowledgments

This research was conducted in the framework of the Israeli Ministry of National Infrastructure, Energy and Water Resources Grant No. 214-11-006 and the Israeli Ministry of Environmental Protection Grant No. 132-3-4.

References

  1. Bian H, Chen L, Dai H, Zhu JY (2017) Integrated production of lignin containing cellulose nanocrystals (LCNC) and nanofibrils (LCNF) using an easily recyclable di-carboxylic acid. Carbohydr Polym 167:167–176CrossRefGoogle Scholar
  2. Capron I, Rojas OJ, Bordes R (2017) Behavior of nanocelluloses at interfaces. Curr Opin Colloid Interface Sci 29:83–95CrossRefGoogle Scholar
  3. Carpenter AW, De Lannoy CF, Wiesner MR (2015) Cellulose nanomaterials in water treatment technologies. Environ Sci Technol 49:5277–5287CrossRefGoogle Scholar
  4. Cowie J, Bilek T, Wegner T, Shatkin JA (2014) Market projections of cellulose nanomaterial-enabled products—part 2: volume estimates. Nanocellulose Mark 13:57–69Google Scholar
  5. Chen L, Zhu JY, Baez C, Kitin P, Elder T (2016) Highly thermal-stable and functional cellulose nanocrystals and nanofibrils produced using fully recyclable organic acids. Green Chem 18:3835–3843CrossRefGoogle Scholar
  6. Danial WH, Abdul Majid Z, Mohd Muhid MN, Triwahyono S, Bakar MB, Ramli Z (2015) The reuse of wastepaper for the extraction of cellulose nanocrystals. Carbohydr Polym 118:165–169CrossRefGoogle Scholar
  7. Du C, Liu M, Li B, Li H, Meng Q, Zhan H (2016) Cellulose nanocrystals prepared by persulfate one-step oxidation of bleached bagasse pulp. BioResources 11:4017–4024Google Scholar
  8. George J, Sabapathi SN (2015) Cellulose nanocrystals: synthesis, functional properties, and applications. Nanotechnol Sci Appl 8:45–54CrossRefGoogle Scholar
  9. Gray G, Olmstead A (1993) Fluorescence emission from mechanical pulp sheets. J Photochem Photobiol A Chem 73:59–65CrossRefGoogle Scholar
  10. Harrington BJ, Hageage GJ (1991) Calcofluor White : tips for improving its use. Clin Microbiol Newsl 13:3–5CrossRefGoogle Scholar
  11. Harrington BJ, Hageage GJ (2003) Calcofluor White : a review of its uses and applications in clinical mycology and parasitology. Lab Med 34:361–367CrossRefGoogle Scholar
  12. Herth W, Schnepf E (1980) The fluorochrome, Calcofluor White, binds oriented to structural polysaccharide fibrils. Protoplasma 133:129–133CrossRefGoogle Scholar
  13. Hughes J, McCully ME (1975) The use of an optical brightener in the study of plant structure. Stain Technol 50:319–329CrossRefGoogle Scholar
  14. Hamer EC, Moore CB, Denning DW (2006) Comparison of two fluorescent whiteners, Calcofluor and Blankophor, for the detection of fungal elements in clinical specimens in the diagnostic laboratory. Clin Microbiol Infect 12:181–184CrossRefGoogle Scholar
  15. Johar N, Ahmad I, Dufresne A (2012) Extraction, preparation and characterization of cellulose fibres and nanocrystals from rice husk. Ind Crops Prod 37:93–99CrossRefGoogle Scholar
  16. Jonoobi M, Mathew AP, Oksman K (2012) Producing low-cost cellulose nanofiber from sludge as new source of raw materials. Ind Crops Prod 40:232–238CrossRefGoogle Scholar
  17. Lee KY, Aitomäki Y, Berglund LA, Oksman K, Bismarck A (2014) On the use of nanocellulose as reinforcement in polymer matrix composites. Compos Sci Technol 105:15–27CrossRefGoogle Scholar
  18. Mariño M, Da Silva LL, Durán N, Tasic L (2015) Enhanced materials from nature: nanocellulose from citrus waste. Molecules 20:5908–5923CrossRefGoogle Scholar
  19. Mautner A, Lee KY, Tammelin T, Mathew AP, Nedoma AJ, Li K, Bismarck A (2015) Cellulose nanopapers as tight aqueous ultra-filtration membranes. React Funct Polym 86:209–214CrossRefGoogle Scholar
  20. Song Q, Winter WT, Bujanovic BM, Amidon TE (2014) Nanofibrillated cellulose (NFC): a high-value co-product that improves the economics of cellulosic ethanol production. Energies 7:607–618CrossRefGoogle Scholar
  21. Sheltami RM, Abdullah I, Ahmad I, Dufresne A, Kargarzadeh H (2012) Extraction of cellulose nanocrystals from mengkuang leaves (Pandanus tectorius). Carbohydr Polym 88:772–779CrossRefGoogle Scholar
  22. Tang L, Huang B, Lu Q, Wang S, Ou W, Lin W, Chen X (2013) Ultrasonication-assisted manufacture of cellulose nanocrystals esterified with acetic acid. Bioresour Technol 127:100–105CrossRefGoogle Scholar
  23. Voisin H, Bergström L, Liu P, Mathew A (2017) Nanocellulose-based materials for water purification. Nanomaterials 7:57CrossRefGoogle Scholar
  24. Wang R, Chen L, Zhu JY, Yang R (2017) Tailored and integrated production of carboxylated cellulose nanocrystals (CNC) with nanofibrils (CNF) through maleic acid hydrolysis. ChemNanoMat 3:328–335CrossRefGoogle Scholar
  25. Xiquanq L, Tingzhu Q, Shaoqui Q (1990) Kinetics of the carboxymethylation of cellulose in the isopropyl alcohol system. Actr Polyrnerica 41(4):220–222CrossRefGoogle Scholar
  26. Xu Y, Atrens AD, Stokes JR (2017) Rheology and microstructure of aqueous suspensions of nanocrystalline cellulose rods. J Colloid Interface Sci 496:130–140CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2018

Authors and Affiliations

  1. 1.School of Mechanical Engineering, Faculty of Engineering and Water Research CenterTel Aviv UniversityTel AvivIsrael
  2. 2.Department of Biology and Environment, Faculty of Natural SciencesUniversity of Haifa-OranimTivonIsrael

Personalised recommendations