Influence of process variables on physical characteristics of spray freeze dried cellulose nanocrystals
- 189 Downloads
This study compares the characteristics of cellulose nanocrystal (CNC) agglomerates prepared using spray drying, freeze drying, and spray freeze drying. Moreover, the effect of the concentration of CNC in the initial aqueous dispersion (~ 0.5–10.0 wt%) on the morphology, particle size distribution, porosity and crystalline structure of the spray freeze dried CNC agglomerates were investigated. Scanning electron microscopy was used to characterize the morphology and particle size distribution, nitrogen adsorption–desorption isotherms were used to analyze the porous structure of the particles, and X-ray diffraction was used to analyze the crystalline structure of the particles. Spray drying of CNC resulted in 0.5–30 μm dense agglomerates of slightly deformed elliptical and mushroom cap shaped particles with no porous structure. Freeze drying resulted in large irregular shape flakes of various sizes ranging mainly between 150 and 350 μm. On the other hand, spray freeze drying of CNC from dilute suspensions (~ 0.5 wt%) resulted in larger (4–240 μm) light spherical particles that were highly porous (~ 110 times larger in BET surface area), with web-like inter-connected structure consisting of 10–30 nm thick nanofibrils. Increasing the concentration to 5 wt% produced slightly denser spherical particles (13–110 μm) with slightly less porous web-like structure.
KeywordsCellulose nanocrystals Spray freeze drying Morphology Particle size distribution Porosity Crystallinity
The authors acknowledge financial support from the Natural Sciences and Engineering Research Council of Canada (NSERC), McGill University, Center for Applied Research on Polymers and Composites (CREPEC), and Strategic Network for Innovative Plastic Material and Manufacturing Processes (NIPMMP). FPInnovations donated the CNC used in this project. The authors thank Dr. David Liu for helping with the SEM images at the Facility for Electron Microscopy Research (FEMR) of McGill University.
- Hu J, Johnston KP, Williams RO (2003) Spray freezing into liquid (SFL) particle engineering technology to enhance dissolution of poorly water soluble drugs: organic solvent versus organic/aqueous co-solvent systems. Eur J Pharm Sci 20:295–303. https://doi.org/10.1016/s0928-0987(03)00203-3 CrossRefPubMedGoogle Scholar
- Kamal M, Khoshkava V (2017) Spray freeze-dried nanoparticles and method of use thereof. Google PatentsGoogle Scholar
- Li W, Wang R, Liu S (2011) Nanocrystalline cellulose prepared from softwood kraft pulp via ultrasonic-assisted acid hydrolysis. Bioresources 6:4271–4281Google Scholar
- Nyberg B, Carlstrom E, Carlsson R (1991) Granulation of ceramic powders for pressing by spray-freezing and freeze-drying. Euro-Ceramics II 1:447–451Google Scholar
- Sacui IA et al (2014) Comparison of the properties of cellulose nanocrystals and cellulose nanofibrils isolated from bacteria, tunicate, and wood processed using acid, enzymatic, mechanical, and oxidative methods. ACS Appl Mater Interface 6:6127–6138. https://doi.org/10.1021/am500359f CrossRefGoogle Scholar
- Vicent M, Sánchez E, Molina T, Nieto MI, Moreno R (2012) Comparison of freeze drying and spray drying to obtain porous nanostructured granules from nanosized suspensions. J Eur Ceram Soc 32:1019–1028. https://doi.org/10.1016/j.jeurceramsoc.2011.11.034 CrossRefGoogle Scholar