Cellulose

pp 1–15 | Cite as

The microscopic morphology of insulation pressboard: an image processing perspective

Original Paper
  • 31 Downloads

Abstract

To analyze the changes in microscopic morphology of the pressboard under surface partial discharge conditions, some methods such as enhancement, denoising, segmentation, optimization, edge detection, expansion, and corrosion were used to process scanning electron microscope images of the pressboard, so as to extract the fiber width, hole size, and surface roughness. Experiments show that after different thermal aging times, the trends to change in the microscopic morphology of insulation pressboard under partial discharge are different; the microscopic morphology of the pressboard is changed by the breaking of the chemical bonds in the internal structure of the fiber. At a degree of polymerization of 500, the insulation life is only about half of its original value: at this time, the corresponding fiber width is 91.1% of the unaged pressboard fiber width, and the corresponding roughness is 0.162. At a degree of polymerization of 250, the insulation pressboard is nearing the end of its life: at this time, the corresponding fiber width is 79.2% of that of the unaged pressboard, and the corresponding roughness is 0.225.

Graphical Abstract

Keywords

Image processing SEM image of pressboard Thermal aging Microscopic morphology 

Supplementary material

10570_2018_1768_MOESM1_ESM.docx (35 kb)
Supplementary material 1 (DOCX 34 kb)

References

  1. Adams R, Bischof L (1994) Seeded region growing. IEEE Trans Pattern Anal Mach Intell 16:641–647CrossRefGoogle Scholar
  2. C57.91-2011—IEEE guide for loading mineral-oil-immersed transformers and step-voltage regulators, pp 97–105Google Scholar
  3. Cheng HD, Min R, Zhang M (2010) Automatic wavelet base selection and its application to contrast enhancement. Signal Process 90:1279–1289CrossRefGoogle Scholar
  4. Cho D, Bui TD (2013) Fast image enhancement in compressed wavelet domain. Signal Process 98:295–307CrossRefGoogle Scholar
  5. Daubechies I (1992) Ten lectures on wavelets. SIAM, PhiladelphiaCrossRefGoogle Scholar
  6. Davis LS (1975) A survey of edge detection techniques. Comput Gr Image Process 4:248–270CrossRefGoogle Scholar
  7. Demirel H, Ozcinar C, Anbarjafari G (2010) Satellite image contrast enhancement using discrete wavelet transform and singular value decomposition. IEEE Geosci Remote Sens Lett 7:333–337CrossRefGoogle Scholar
  8. Du Y, Zahn M, Lesieutre BC, Mamishev AV, Lindgren SR (2002) Moisture equilibrium in transformer paper–oil systems. IEEE Electr Insul Mag 15:11–20CrossRefGoogle Scholar
  9. Edwards HGM, Farwell DW, Webster D (1997) FT Raman microscopy of untreated natural plant fibres. Spectrochim Acta Part A Mol Biomol Spectrosc 53:2383–2392CrossRefGoogle Scholar
  10. Emsley AM (1994) Kinetics and mechanisms of degradation of cellulose insulation in power transformers. Polym Degrad Stab 44:343–349CrossRefGoogle Scholar
  11. Emsley AM, Xiao X, Heywood RJ, Ali M (2000) Degradation of cellulosic insulation in power transformers. Part 2: formation of furan products in insulating oil. IEE Proc Sci Meas Technol 147:110–114CrossRefGoogle Scholar
  12. Felzenszwalb PF, Huttenlocher DP (2004) Efficient graph-based image segmentation. Int J Comput Vis 59:167–181CrossRefGoogle Scholar
  13. Flora SD, Rajan JS (2016) Assessment of paper–oil insulation under copper corrosion using polarization and depolarization current measurements. IEEE Trans Dielectr Electr Insul 23:1523–1533CrossRefGoogle Scholar
  14. Gao J, Yang LJ, Wang YY, Liu X, Du YY, Yao DY (2016) Effect of moisture and thermal degradation onthe activation energy of oil–paper insulation in frequency domain spectroscopy measurement. IET Gener Transm Distrib 10:2042–2049CrossRefGoogle Scholar
  15. Garside P, Wyeth P (2006) Identification of cellulosic fibres by FTIR spectroscopy: differentiation of flax and hemp by polarized ATR FTIR. Stud Conserv 51:205–211CrossRefGoogle Scholar
  16. Hinterstoisser B, Salmen L (2000) Application of dynamic 2D FTIR to cellulose. Vib Spectrosc 22:111–118CrossRefGoogle Scholar
  17. Keyes SD, Cooper L, Duncan S, Koebernick N, Mckay Fletcher DM, Scotson CP, Veelen AV, Sinclair I, Roose T (2017) Measurement of micro-scale soil deformation around roots using four-dimensional synchrotron tomography and image correlation. J R Soc Interface 14:1–13CrossRefGoogle Scholar
  18. Kim SE, Jeon JJ, Eom IK (2016) Image contrast enhancement using entropy scaling in wavelet domain. Signal Process 127:1–11CrossRefGoogle Scholar
  19. Liao RJ, Tang C, Yang LJ, Sun CX, Zhang Y (2007) Research on the microstructure and morphology of power transformer insulation paper after thermal aging. Proc CSEE 27:59–64Google Scholar
  20. Liao RJ, Yan JM, Yang LJ, Zhu MZ, Sun CX (2011) Characteristics of partial discharge-caused surface damage for oil-impreganted insulation paper. Proc CSEE 31:129–137Google Scholar
  21. Loza A, Bull DR, Hill PR, Achim AM (2013) Automatic contrast enhancement of low-light images based on local statistics of wavelet coefficients. Digit Signal Process 23:1856–1866CrossRefGoogle Scholar
  22. Lundgaard LE, Hansen W, Linhjell D, Painter TJ (2004) Aging of oil-impregnated paper in power transformers. IEEE Trans Power Deliv 19:230–239CrossRefGoogle Scholar
  23. Mallat SG (1989) A theory for multiresolution signal decomposition: the wavelet representation. IEEE Trans Pattern Anal Mach Intell 11:674–693CrossRefGoogle Scholar
  24. Mao LT, Xue R, An LQ (2008) Quantitative analysis on SEM image of microstructure with MATLAB. J Chin Electr Microsc Soc 23:579–583Google Scholar
  25. Martin D, Saha T (2017) A review of the techniques used by utilities to measure the water content of transformer insulation paper. IEEE Electr Insul Mag 33:8–16CrossRefGoogle Scholar
  26. Montsinger VM (1930) Abridgment of loading transformers by temperature. J AIEE 49:293–297Google Scholar
  27. Mozaffari MH, Lee WS (2017) Convergent heterogeneous particle swarm optimisation algorithm for multilevel image thresholding segmentation. IET Image Process 11:605–619CrossRefGoogle Scholar
  28. Oommen TV, Lindgren SR (2001) Bubble evolution from transformer overload. In: Transmission and distribution conference and exposition, Atlanta, GA, USA, pp 137–142Google Scholar
  29. Otsu N (1979) A threshold selection method from gray-level histograms. IEEE Trans Syst Man Cybern 9:62–66CrossRefGoogle Scholar
  30. Pan Q, Yang F, Ye L, Liang Y, Cheng YM (2005) Survey of a kind of nonlinear filters-UKF. Control Decis 20:481–489Google Scholar
  31. Pradhan MK, Ramu TS (2005) On the estimation of elapsed life of oil-immersed power transformers. IEEE Trans Power Deliv 20:1962–1969CrossRefGoogle Scholar
  32. Prasad DS, Reddy BS (2017) Digital image processing techniques for estimating power released from the corona discharges. IEEE Trans Dielectr Electr Insul 24:75–82CrossRefGoogle Scholar
  33. Qi B, Tang LR, Zhang J (2008) Research on measurement of hydrophobicity of insulators. Proc CSEE 28:121–124Google Scholar
  34. Qin LJ, Chen FS, Wang GS (2004) Effects of fiber properties on the strength properties of paper. Heilongjiang Pulp Pap 32:11–12Google Scholar
  35. Shroff DH, Stannett AW (1985) A review of paper aging in power transformers. IEE Proc Gener Transm Distrib 132:312–319CrossRefGoogle Scholar
  36. Song JC, Yue B, Xie HK (2000) Study on multi-stress aging test system for stator winding insulation of large generator. Proc CSEE 20:9–13Google Scholar
  37. Sumengen B, Manjunath BS, Kenney C (2003) Image segmentation using multi-region stability and edge strength. In: International conference on image processing, Barcelona, Spain, pp 142–147Google Scholar
  38. Sun PT, Sima WX, Wang M, Wu JY (2016) Influence of thermal aging on the breakdown characteristics of transformer oil impregnated paper. IEEE Trans Dielectr Electr Insul 23:3473–3481Google Scholar
  39. Tang JS, Liu XM, Sun QL (2010) A direct image contrast enhancement algorithm in the wavelet domain for screening mammograms. IEEE J Sel Top Signal Process 3:74–80CrossRefGoogle Scholar
  40. Thakur S, Sarathi R, Gautam R, Vinu R (2017) Thermal aging of cellulosic pressboard material and its surface discharge and chemical characterization. Cellulose 24:5197–5210CrossRefGoogle Scholar
  41. Tu YP, Chen JJ, Wang SH, Wang W (2016) Moisture migration in oil-impregnated film insulation under thermal ageing. IEEE Trans Dielectr Electr Insul 23:1135–1141CrossRefGoogle Scholar
  42. Verma P, Roy M, Verma A, Bhanot V (2001) Assessment of degradation of transformer insulation paper by SEM and X-RD techniques. In: Proceeding of the 2004 IEEE international conference on solid dielectrics, Toulouse, FranceGoogle Scholar
  43. Verma P, Roy M, Verma A, Bhanot V (2004) Assessment of degradation of transformer insulation paper by structural analysis. J Polym Mater 21:361–369Google Scholar
  44. Wang GL, Wu CW, Dong JX, Xie XS (2001) The application of software photoshop in quantitative study on SEM photos. J Chin Electr Microsc Soc 20:279–282Google Scholar
  45. Wang BJ, Shi B, Cai Y, Tang CS (2008) 3D visualization and porosity computation of clay soil SEM image by GIS. Rock Soil Mech 29:251–255Google Scholar
  46. Wang YY, Gong SL, Grzybowski S (2011) Reliability evaluation method for oil-paper insulation in power transformers. Energies 4:1362–1375CrossRefGoogle Scholar
  47. Wang FC, Yan K, Zhang ZY, Jia ZH, Lyu FC (2014) Segmentation algorithm of hydrophobic image based on improved canny operator. High Volt Appar 50:97–101Google Scholar
  48. Wei YH, Mu HB, Zhang GJ, Chen G (2016) A study of oil-impregnated paper insulation aged with thermal-electrical stress: PD characteristics and trap parameters. IEEE Trans Dielectr Electr Insul 23:3411–3420CrossRefGoogle Scholar
  49. Xia GQ, Wu GN, Gao B, Yin HJ, Yang FB (2017) A new method for evaluating moisture content and aging degree of transformer oil-paper insulation based on frequency domain spectroscopy. Energies 10:1195–1209CrossRefGoogle Scholar
  50. Yan JM, Liao RJ, Yang LJ, Hao J, Sun CX (2011) Analysis of damage products of oil-impregnated insulation paper caused by partial discharge. Trans Chin Electrotech Soc 26:184–191Google Scholar
  51. Yang PZ, Jiang SW (2002) The study on the 3D assessment of surface roughness. Mach Des Res 18:64–67Google Scholar
  52. Zou X, Uesaka T, Gurnagul N (1996) Prediction of paper permanence by accelerated aging I. Kinetic analysis of the aging process. Cellulose 3:243–267CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media B.V., part of Springer Nature 2018

Authors and Affiliations

  1. 1.Hebei Provincial Key Laboratory of Power Transmission Equipment Security DefenseNorth China Electric Power UniversityBaodingChina

Personalised recommendations