Low-Temperature Synthesis of Ruddlesden–Popper Type Layered Perovskite LaxCa3−xMn2O7 for Methane Combustion
- 356 Downloads
- 3 Citations
Abstract
In comparison to the conventional high temperature (≥1,300 °C) preparation conditions, a series of Ruddlesden–Popper (R–P) type layered perovskite LaxCa3−xMn2O7 (x = 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, and 3.0) were synthesized at 700 °C by an improved method based on the strategy involving the “inductive effect of Cl”. XRD results revealed the unitary R–P type layered perovskite structure in the samples of x = 0.8, 1.0, 1.2, and 3.0. While in the samples of x = 1.5, 2.0, and 2.5, the layered perovskite phase and lanthanum oxide phase coexisted, which resulted in their poor redox properties. XPS and H2-TPR results demonstrated that the redox properties of LaxCa3−xMn2O7 were correlated with its structural integrity and purity and influenced by the x value. The sample of x = 1.2 gave the highest methane combustion activity with T 50 = 449 °C, and the sample of x = 2.0 showed the lowest activity with T 50 = 538 °C, which was in accordance with the XPS and H2-TPR results. The specific surface areas of LaxCa3−xMn2O7 depended on the x value monotonically, and the sample of x = 0.8 presented the highest surface area value (33.59 m2 g−1).
Keywords
Ruddlesden–Popper type layered perovskite LaxCa3-xMn2O7 Methane Catalytic combustionSupplementary material
References
- 1.Zhu J, Thomas A (2009) Appl Catal B 92:225CrossRefGoogle Scholar
- 2.Royer S, Duprez D (2011) ChemCatChem 3:24CrossRefGoogle Scholar
- 3.Mogensen M, Lybye D, Bonanos N, Hendriksen P, Poulsen F (2004) Solid State Ionics 174:279CrossRefGoogle Scholar
- 4.Maluf SS, Nascente PAP, Afonso CRM, Assaf EM (2012) Appl Catal A 413:85CrossRefGoogle Scholar
- 5.Fujimoto J, Masuda K, Hanaki Y, Munakata F (2011) J Ceram Soc Jpn 119:85CrossRefGoogle Scholar
- 6.Ruddlesden SN, Popper P (1958) Acta Crystallogr 11:54CrossRefGoogle Scholar
- 7.Pena MA, Fierro JLG (2001) Chem Rev 101:1981CrossRefGoogle Scholar
- 8.Centi G, Perathoner S (2008) Micropor Mesopor Mater 107:3CrossRefGoogle Scholar
- 9.Maeno Y, Hashimoto H, Yoshida K, Nishizaki S, Fujita T, Bednorz JG, Lichtenberg F (1994) Nature 372:532CrossRefGoogle Scholar
- 10.Jung K-N, Lee J-I, Im WB, Yoon S, Shin K-H, Lee J-W (2012) Chem Commun 48:9406CrossRefGoogle Scholar
- 11.Moritomo Y, Asamitsu A, Kuwahara H, Tokura Y (1996) Nature 380:141CrossRefGoogle Scholar
- 12.Asano H, Hayakawa J, Matsui M (1997) Appl Phys Lett 70:2303CrossRefGoogle Scholar
- 13.Neiner D, Spinu L, Golub V, Wiley JB (2006) Chem Mater 18:518CrossRefGoogle Scholar
- 14.Li Y, Chen G, Zhang H, Li Z, Sun J (2008) J Solid State Chem 181:2653CrossRefGoogle Scholar
- 15.Kanade KG, Baeg J-O, Kong K-j, Kale BB, Lee SM, Moon S-J, Lee CW, Yoon S (2008) Int J Hydrogen Energy 33:6904CrossRefGoogle Scholar
- 16.Hur NH, Chi EO, Kwon YU, Yu J, Kim JT, Park YK, Park JC (1999) Solid State Commun 112:61CrossRefGoogle Scholar
- 17.Murata T, Terai T, Fukuda T, Kakeshita T (2006) J Magn Magn Mater 303:138CrossRefGoogle Scholar
- 18.Tsujimoto Y, Li JJ, Yamaura K, Matsushita Y, Katsuya Y, Tanaka M, Shirako Y, Akaogi M, Takayama-Muromachi E (2011) Chem Commun 47:3263CrossRefGoogle Scholar
- 19.Zarur AJ, Ying JY (2000) Nature 403:65CrossRefGoogle Scholar
- 20.McCarty JG (2000) Nature 403:35CrossRefGoogle Scholar
- 21.Chandler CD, Roger C, Hampden-Smith MJ (1993) Chem Rev 93:1205CrossRefGoogle Scholar
- 22.Gopalakrishnan J (1995) Chem Mater 7:1265CrossRefGoogle Scholar
- 23.Aguiar EC, Ramirez MA, Moura F, Varela JA, Longo E, Simoes AZ (2013) Ceram Int 39:13CrossRefGoogle Scholar
- 24.Shao Z, Zhou W, Zhu Z (2012) Prog Mater Sci 57:804CrossRefGoogle Scholar
- 25.Modeshia DR, Walton RI (2010) Chem Soc Rev 39:4303CrossRefGoogle Scholar
- 26.Du X, Zou G, Zhang Y, Wang X (2013) J Mater Chem A 1:8411CrossRefGoogle Scholar
- 27.Basith MA, Hoque SM, Shahparan M, Hakim MA, Huq M (2007) Phys B 395:126CrossRefGoogle Scholar
- 28.Asano H, Hayakawa J, Matsui M (1996) Appl Phys Lett 68:3638CrossRefGoogle Scholar
- 29.Merino NA, Barbero BP, Grange P, Cadus LE (2005) J Catal 231:232CrossRefGoogle Scholar
- 30.Barbero BP, Gamboa JA, Cadus LE (2006) Appl Catal B 65:21CrossRefGoogle Scholar
- 31.Batis NH, Delichere P, Batis H (2005) Appl Catal A 282:173CrossRefGoogle Scholar
- 32.Kahoula A, Hammouchea A, NaÃamounea F, Chartierb P, Poilleratb G, Koenigb JF (2000) Mater Res Bull 35:1955CrossRefGoogle Scholar
- 33.Lee YN, Lago RM, Fierro JLG, González J (2001) Appl Catal A 215:245CrossRefGoogle Scholar
- 34.Chen J, Shen M, Wang X, Qi G, Wang J, Li W (2013) Appl Catal B 134:251CrossRefGoogle Scholar
- 35.Tabata K, Hirano Y, Suzuki E (1998) Appl Catal A 170:245CrossRefGoogle Scholar
- 36.Ponce S, Peña MA, Fierro JLG (2000) Appl Catal B 24:193CrossRefGoogle Scholar
- 37.Tang X, Li Y, Huang X, Xu Y, Zhu H, Wang J, Shen W (2006) Appl Catal B 62:265CrossRefGoogle Scholar
- 38.Yakovleva IS, Isupova LA, RogovV A, Sadykov VA (2008) Kinet Catal 49:261CrossRefGoogle Scholar
- 39.Yang D, Wang L, Sun Y, Zhou K (2010) J Phys Chem C 114:8926CrossRefGoogle Scholar
- 40.Arney D, Fuoco L, Boltersdorf J, Maggard PA (2012) J Am Ceram Soc 96:1158CrossRefGoogle Scholar
- 41.Huang Y, Wei Y, Fan L, Huang M, Lin J, Wu J (2009) Int J Hydrogen Energy 34:5318CrossRefGoogle Scholar
- 42.Choudhary TV, Banerjee S, Choudhary VR (2002) Appl Catal A 234:1CrossRefGoogle Scholar
- 43.O’Connell M, Norman AK, Huttermann CF, Morris MA (1999) Catal Today 47:123CrossRefGoogle Scholar