Study of the Possibility of Preparing Pseudo-Alloy Coatings by Gas-Thermal Deposition

  • V. M. Gusev
  • A. G. Buklakov
  • A. S. TyuftyaevEmail author
  • M. Kh. Gadzhiev
  • A. V. Mordynskii

Spraying processes for composite pseudo-alloy coatings by plasma and electric-arc methods are analyzed. During performance of the work the effect of interaction of components of mechanical mixtures of powders in a plasma jet and materials of dissimilar wires in the electric-arc method on properties of the coatings obtained is considered. The possibility of preparing pseudo-alloy coatings by plasma and electric-arc spraying is demonstrated. Plasma spraying of mixtures of powders of aluminum oxide and nickel is conducted with a PP-25 plasma torch. Electric-arc spraying is carried out using EM-14M equipment with a combination of copper wire and steel and aluminum wires.


plasma and electric-arc spraying steel copper and aluminum wires powder mixture pseudo-alloy coating 


  1. 1.
    V. A. Rogov, V. V. Solov’ev, and V. V. Kopylov, New Materials in Engineering: Handbook [in Russsian], RGU, Moscow (2008).Google Scholar
  2. 2.
    Yu. S. Borisov, N. V. Vigilyanskaya, I. A. Dem’yanov, et al., “Study of dispersion of different wire materials during electric-arc spraying,” Avtomat. Svarka, No. 2, 25–31 (2013).Google Scholar
  3. 3.
    V. M. Gusev and B. M. Solov’ev, “Possibility of preparing intermetallic coatings from mechanical mixtures of gasothermal deposition,” Poroshk. Metall, No. 8, 58–62 (1985).Google Scholar
  4. 4.
    Yu. S. Borisov, N. V. Vigilyanskaya, I. A. Dem’yanov, et al., “Study of the effect of electric-arc spraying regimes on pseudo-alloy cast coating structure and properties,” Avtomat. Svarka, No. 12, 11–17 (2013).Google Scholar
  5. 5.
    L. Kh. Baldaev, V. N. Borisov, and V. A. Vakhalin, Gasothermal Deposition: Handbook [in Russian], Market DS, Moscow (2007).Google Scholar
  6. 6.
    V. V. Kudinov and G. V. Bobrov, Sprayed Coating Application. Theory, Technology, Equipment [in Russian], Metallurgiya, Moscow (1992).Google Scholar
  7. 7.
    A. E. Loginov and V. K. I’lin, “Mathematical model of electric-arc metallization,” Zv. Vyssh. Uchebn. Zaved., Probl. Énerg., No. 11/12, 84–89 (2007).Google Scholar
  8. 8.
    M. Marakhtanov and A. Marakhtanov, “Metal explodes”, Nauka, Zhizn., No. 4, 16–19 (2002).Google Scholar
  9. 9.
    V. P. Kartokhondzhiya, M. O. Mdivnishvili, and Z. K. Saralidze, “Nature of pulsed pressure created by wire explosion in water,” Zh. Tekhn. Fiz., 76, No. 11, 43–46 (2006).Google Scholar
  10. 10.
    V. A. Ageev, V. E. Belashchenko, I. E. Fel’dman, and A. V. Chernoivanov, “Analysis of methods for controlling sprayed particle parameters during electric-arc metallization,” Svaroch. Proizvod., No. 12, 30–32 (1989).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • V. M. Gusev
    • 1
  • A. G. Buklakov
    • 1
  • A. S. Tyuftyaev
    • 2
    Email author
  • M. Kh. Gadzhiev
    • 2
  • A. V. Mordynskii
    • 2
  1. 1.Gubkin Russian State University of Oil and GasMoscowRussia
  2. 2.Joint Institute of High TemperaturesRussian Academy of SciencesMoscowRussia

Personalised recommendations