Advertisement

Analysis of Results of Theoretical and Experimental Studies of the Influence of Radial Gaps in Stepped Slot Seal of Piston Hybrid Energy-Generating Machine

  • V. E. ShcherbaEmail author
  • V. V. Shalai
  • A. V. Grigor’ev
  • A. Yu. Kondyurin
  • E. A. Lysenko
  • A. M. Bazhenov
  • A. S. Tegzhanov
COMPRESSORS, PUMPS, AND PIPELINE FITTINGS
  • 12 Downloads

The experimental dependencies of the quantity of liquid in the discharge line of the compressor section on the discharge pressures of the compressor and pump sections of a piston hybrid energy-generating machine having stepped slot seal are presented and analyzed. The dependencies of the characteristics of the studied machine on the slot seal gap sizes obtained in the numerical study are presented and analyzed.

Keywords

hybrid energy-generating machine piston pump piston compressor 

References

  1. 1.
    V. E. Shcherba, A. P. Bolshtyanskii, V. V. Shalai, et al., Compressor Pumps. Working Processes and Design Fundamentals [in Russian], Mashinostroenie, Moscow (2013).Google Scholar
  2. 2.
    V. E. Shcherba, A. P. Bolshtyanskii, S. Yu. Kaigorodov, and D. A. Kuzeeva, “Analysis of main advantages of combining positive displacement compressors and pumps in a single unit,” Vestn. Mashinostr., No. 12, 15–19 (2015).Google Scholar
  3. 3.
    V. E. Shcherba, E. A. Lysenko, G. A. Nesterenko, et al., “Development and investigation of a piston seal in the form of a smooth stepped groove for a volumetric hybrid energy-converting piston machine,” Khim. Neftegaz. Mashinostr., No. 4, 45–48 (2016).Google Scholar
  4. 4.
    A. M. Bazhenov, V. E. Shcherba, A. V. Grigor’ev, et al., “Analysis of the influence of the ratio of forward and backward fluid flows in slot seal of piston hybrid energy-converting machine on the ratio of the discharge pressures in the pump and compressor chambers,” Omsk. Nauch. Vestn. Ser. Prib., Mash. Tekhnol., No. 6 (150), 45–49 (2016).Google Scholar
  5. 5.
    A. M. Bazhenov, V. E. Shcherba, A. V. Grigor’ev, et al., “Analysis of the influence of eccentricity on the ratio of forward and backward mass fluid flows in stepped-type piston slot seal of positive-displacement piston hybrid energy-converting machine,” Omsk. Nauch. Vestn. Ser. Prib., Mash. Tekhnol., No. 6 (150), 49–53 (2016).Google Scholar
  6. 6.
    B. S. Fotin (general editor), Piston Compressors [in Russian], Mashinostroenie, Leningrad (1987).Google Scholar
  7. 7.
    P. I. Plastinin, Piston Compressors (in 2 vols.). Vol. 1, Theory and Calculation [in Russian], KolosS, Moscow (2000).Google Scholar
  8. 8.
    V. E. Shcherba, Working Processes of Positive Displacement Compressors [in Russian], Nauka, Moscow (2008).Google Scholar
  9. 9.
    V. E. Shcherba, V. V. Shalai, E. A. Pavlyuchenko, et al., “Mathematical modeling of the working processes of a piston compressor with intensive cooling of the cylinder-piston group,” Khim. Neftegaz. Mashinostr., No. 4, 28–32 (2015).Google Scholar
  10. 10.
    A. M. Bazhenov, A. Yu. Kondyurin, and V. E. Shcherba, “Calculation of stepped-type smooth slot seal of positive displacement piston hybrid energy-converting machine,” Electronic Collec. of Paps. 20th All-Russian Sci.-Tech. Conf. Students and Candidates “Hydraulic Machines, Hydraulic Drives, and Hydropneumoautomatic Machines [in Russian], INU MEI, Moscow (2016), pp. 10–14.Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • V. E. Shcherba
    • 1
    Email author
  • V. V. Shalai
    • 1
  • A. V. Grigor’ev
    • 1
  • A. Yu. Kondyurin
    • 1
  • E. A. Lysenko
    • 1
  • A. M. Bazhenov
    • 1
  • A. S. Tegzhanov
    • 1
  1. 1.Omsk State Technical University (Omskii Gosudarstvennyi Tekhnicheskii Universitet)OmskRussia

Personalised recommendations