Analysis of Errors in the Form of a Part in Forming of Polyhedra by a Planetary Gear with the Use of Methods from the Geometric Theory of Cutting
FABRICATION TECHNOLOGY
First Online:
- 35 Downloads
Methods of forming polyhedral (multifaceted) surfaces by means of a planetary plotting device and a technique of determining the error are presented. Through the use of the obtained data, an analysis of error in the geometric form of a produced part as a function of the overall dimensions and number of facets is performed. The results of the study may be used in the development of design and production documentation in the training of the production of parts containing multifaceted surfaces to assure specified characteristics of an article.
Keywords
forming milling cutter multifaceted surface errorReferences
- 1.M. S. Razumov, Increasing the Productivity of the Process of Forming Polyhedral Outer Surfaces by a Planetary Gear: Auth. Abstr. Dissert. Cand. Techn. Sci., Kursk (2011).Google Scholar
- 2.N. T. Sbornik, Modern Problems of Drilling and Oil-Field Mechanics (1990).Google Scholar
- 3.A. G. Ivakhnenko and V. V. Kuts, Structural Parametric Synthesis of Technological Systems, Kursk State Techn. Univ., Kursk (2010).Google Scholar
- 4.V. V. Kuts, “The profi le distortion value calculation for shaped to be machined surface at the CAD/CAM development for assembled shaped mills,” Avtomatiz. Sovr. Tekhnol., I, No. 11, 5–7 (2014).Google Scholar
- 5.Y. A. Maksimenko and V. V. Kuts, “Analysis of changes in error processing rk-profi le shaft with teeth resharpening cutters with radial constructive feed,” Spravochnik. Inzh. Zh. (2014), pp. 008–012.Google Scholar
- 6.A. G. Ivakhnenko, E. O. Ivakhnenko, A. Y. Altukhov, and V. V. Kuts, “Revisiting the provision of nanoscale precision of cutting on the basis of dynamic characteristics modeling of processing equipment,” J. Nano- and Electronic Phys., 6, I, 3. Art. No. 03051 (2014).Google Scholar
Copyright information
© Springer Science+Business Media New York 2017