Advertisement

Applied Mathematics and Mechanics

, Volume 40, Issue 4, pp 563–578 | Cite as

Rotating sandwich cylindrical shells with an FGM core and two FGPM layers: free vibration analysis

  • R. Karroubi
  • M. Irani-RahaghiEmail author
Article
  • 28 Downloads

Abstract

The free vibration analysis of a rotating cylindrical shell with an analytical method is investigated. The shell is considered as a sandwich structure, where the middle layer is a functionally graded material (FGM) shell, and it is surrounded by two piezoelectric layers. Considering piezoelectric materials to be functionally graded (FG), the material properties vary along the thickness direction as one innovation of this study. Applying the first-order shear deformation theory (FSDT), the equations of motion of this electromechanical system are derived as the partial differential equations (PDEs) using Hamilton’s principle. Then, the Galerkin procedure is used to discretize the governing equations, and the present results are compared with the previously published results for both isotropic and FGM shells to verify the analytical method. Finally, the effects of FGM and functionally graded piezoelectric material (FGPM) properties as well as the thickness ratio and the axial and circumferential wave numbers on the natural frequencies are studied. Moreover, the Campbell diagram is plotted and discussed through the governing equations. The present results show that increasing the non-homogeneous index of the FGM decreases the natural frequencies on the contrary of the effect of non-homogeneous index of the FGPM.

Key words

vibration sandwich structure rotating shell functionally graded material (FGM) functionally graded piezoelectric material (FGPM) 

Chinese Library Classification

O326 

2010 Mathematics Subject Classification

74B05 74H45 74H15 74K25 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    LI, H. and LAM, K. Y. Frequency characteristics of a thin rotating cylindrical in shell using the generalized differential quadrature method. International Journal of Mechanical Sciences, 40(5), 443–459 (1998)CrossRefzbMATHGoogle Scholar
  2. [2]
    LIEW, K. M., NG, T. Y., ZHAO, X., and REDDY, J. N. Harmonic reproducing kernel particle method for free vibration analysis of rotating cylindrical shells. Computer Methods in Applied Mechanics and Engineering, 191, 4141–4157 (2002)CrossRefzbMATHGoogle Scholar
  3. [3]
    CIVALEK, O. An efficient method for free vibration analysis of rotating truncated conical shells. International Journal of Pressure Vessels and Piping, 83, 1–12 (2006)CrossRefGoogle Scholar
  4. [4]
    CIVALEK, O. and GURSES, M. Free vibration analysis of rotating cylindrical shells using discrete singular convolution technique. International Journal of Pressure Vessels and Piping, 86, 677–683 (2009)CrossRefzbMATHGoogle Scholar
  5. [5]
    MALEKZADEH, P. and HEYDARPOUR, Y. Free vibration analysis of rotating functionally graded cylindrical shells in thermal environment. Composite Structures, 94, 2971–2981 (2012)CrossRefGoogle Scholar
  6. [6]
    SUN, S., CHU, S., and CAO, D. Vibration characteristics of thin rotating cylindrical shells with various boundary conditions. Journal of Sound and Vibration, 331, 4170–4186 (2012)CrossRefGoogle Scholar
  7. [7]
    SHENG, G. G. and WANG, X. Nonlinear vibration control of functionally graded laminated cylindrical shells. Composites: Part B, 52, 1–10 (2013)CrossRefGoogle Scholar
  8. [8]
    SAFARPOUR, H., MOHAMMADI, K., GHADIRI, M., and RAJABPOUR, A. Influence of various temperature distributions on critical speed and vibrational characteristics of rotating cylindrical microshells with modified lengthscale parameter. European Physical Journal Plus, 132, 281 (2017)CrossRefGoogle Scholar
  9. [9]
    HEYDARPOUR, Y., AGHDAM, M. M., and MALEKZADEH, P. Free vibration analysis of rotating functionally graded carbon nanotube-reinforced composite truncated conical shells. Composite Structures, 117, 187–200 (2014)CrossRefzbMATHGoogle Scholar
  10. [10]
    DUC, N. D., QUAN, T. Q., and LUAT, V. D. Nonlinear dynamic analysis and vibration of shear deformable piezoelectric FGM double curved shallow shells under damping-thermo-electromechanical loads. Composite Structures, 125, 29–40 (2015)CrossRefGoogle Scholar
  11. [11]
    SOFIYEV, A. H. and KURUOGLU, N. Dynamic instability of three-layered cylindrical shells containing an FGM interlayer. Thin Walled Structures, 93, 10–21 (2015)CrossRefGoogle Scholar
  12. [12]
    MERCAN, K., DEMIR, C., and CIVALEK, O. Vibration analysis of FG cylindrical shells with power-law index using discrete singular convolution technique. Curved and Layered Structures, 3(1), 82–90 (2016)CrossRefGoogle Scholar
  13. [13]
    SHENG, G. G. and WANG, X. The non-linear vibrations of rotating functionally graded cylindrical shells. Nonlinear Dynamics, 87(2), 1095–1109 (2017)CrossRefGoogle Scholar
  14. [14]
    RAZAVI, H., BABADI, A. F., and BENI, Y. T. Free vibration analysis of functionally graded piezoelectric cylindrical nanoshell based on consistent couple stress theory. Composite Structures, 160, 1299–1309 (2017)CrossRefGoogle Scholar
  15. [15]
    JIN, G., YE, T., WANG, X., and MIAO, X. A unified solution for the vibration analysis of FGM doubly-curved shells of revolution with arbitrary boundary conditions. Composites Part B: Engineering, 89, 230–252 (2016)CrossRefGoogle Scholar
  16. [16]
    LAM, K. Y. and QIAN, W. Free vibration of symmetric angle-ply thick laminated composite cylindrical shells. Composites: Part B, 31, 345–354 (2000)CrossRefGoogle Scholar
  17. [17]
    SU, Z., JIN, G., and YE, T. Electro-mechanical vibration characteristics of functionally graded piezoelectric plates with general boundary conditions. International Journal of Mechanical Sciences, 138–139, 42–53 (2018)CrossRefGoogle Scholar
  18. [18]
    ARANI, A. G., BAKHTIARI, R., MOHAMMADIMEHR, M., and MOZDIANFARD, M. R. Electro magneto mechanical responses of a radially polarized rotating functionally graded piezoelectric shaft. Turkish Journal of Engineering and Environmental Sciences, 36, 33–44 (2012)Google Scholar
  19. [19]
    AREFI, M., KARROUBI, R., and IRANI-RAHAGHI, M. Free vibration analysis of functionally graded laminated sandwich cylindrical shells integrated with piezoelectric layer. Applied Mathematics and Mechanics (English Edition), 37(7), 821–834 (2016)  https://doi.org/10.1007/s10483-016-2098-9 MathSciNetCrossRefGoogle Scholar
  20. [20]
    KADOLI, R. and GANESAN, N. Buckling and free vibration analysis of functionally graded cylindrical shells subjected to a temperature-specified boundary condition. Journal of Sound and Vibration, 289, 450–480 (2006)CrossRefGoogle Scholar
  21. [21]
    JIN, G., SHI, S., SU, Z., LI, S., and LIU, Z. A modified Fourier-Ritz approach for free vibration analysis of laminated functionally graded shallow shells with general boundary conditions. International Journal of Mechanical Sciences, 93, 256–269 (2015)CrossRefGoogle Scholar
  22. [22]
    LIU, Y. and CHU, F. Nonlinear vibrations of rotating thin circular cylindrical shell. Nonlinear Dynamics, 67, 1467–1479 (2012)MathSciNetCrossRefzbMATHGoogle Scholar
  23. [23]
    ARANI, A. G., SHAJARI, A. R., AMIR, S., and LOGHMAN, A. Electro-thermo-mechanical nonlinear nonlocal vibration and instability of embedded micro-tube reinforced by BNNT, conveying fluid. Physica E, 45, 109–121 (2012)CrossRefGoogle Scholar
  24. [24]
    SU, Z., JIN, G., WANG, Y., and YE, X. A general Fourier formulation for vibration analysis of functionally graded sandwich beams with arbitrary boundary condition and resting on elastic foundations. Acta Mechanica, 227(5), 1493–1514 (2016)MathSciNetCrossRefzbMATHGoogle Scholar
  25. [25]
    SHENG, G. G. and WANG, X. Active control of functionally graded laminated cylindrical shells. Composite Structures, 90, 448–457 (2009)CrossRefGoogle Scholar
  26. [26]
    ANSARI, R. and TORABI, J. Numerical study on the buckling and vibration of functionally graded carbon nanotube-reinforced composite conical shells under axial loading. Composites: Part B, 95, 196–208 (2016)CrossRefGoogle Scholar
  27. [27]
    SU, Z., JIN, G., and YE, T. Vibration analysis and transient response of a functionally graded piezoelectric curved beam with general boundary conditions. Smart Materials and Structures, 25(6), 1–14 (2016)CrossRefGoogle Scholar
  28. [28]
    LI, H., LAM, K. Y., and NG, T. Y. Rotating Shell Dynamics, Elsevier, Amsterdam (2005)zbMATHGoogle Scholar
  29. [29]
    LOY, C. T., LAM, K. Y., and REDDY, J. N. Vibration of functionally graded cylindrical shells. International Journal of Mechanical Sciences, 41, 309–324 (1999)CrossRefzbMATHGoogle Scholar
  30. [30]
    PATEL, B. P., GUPTA, S. S., LOKNATH, M. S., and KADU, C. P. Free vibration analysis of functionally graded elliptical cylindrical shells using higher-order theory. Composite Structures, 69, 259–270 (2005)CrossRefGoogle Scholar
  31. [31]
    CHEN, W. Q., BIAN, Z. G., LV, C. F., and DING, H. J. 3D free vibration analysis of a functionally graded piezoelectric hollow cylinder filled with compressible fluid. International Journal of Solids and Structures, 41, 947–964 (2004)CrossRefzbMATHGoogle Scholar
  32. [32]
    XUE, Y. and LIU, J. Decay rate of Saint-Venant end effects for plane deformations of piezoelectric piezomagnetic sandwich structures. Acta Mechanica Solida Sinica, 23(5), 407–419 (2010)CrossRefGoogle Scholar

Copyright information

© Shanghai University and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Department of Solid Mechanics, Faculty of Mechanical EngineeringUniversity of KashanKashanIran

Personalised recommendations