Advertisement

Design and band coalition of dual band microstrip filter using DGS, coupled line structures and series inductive metallic vias

  • Sourav MoitraEmail author
  • Ranjan Dey
  • Partha Sarathee Bhowmik
Article
  • 7 Downloads

Abstract

An approach to design compact dual band BPF and technique to unite the two bands into a single wide band is presented in this paper. The novelty of the filter stands on the application of series of metallic vias which are used to merge the bands obtained using coupled line circuits and DGS structure. The coupled line filter and the coupled line filter integrated with DGS shows passband resonance at 4.5 GHz and 5.1 GHz within the microwave frequency of operation. Series metallic vias are used to merge the passbands into a single wider passband of bandwidth 1.6 GHz (3.5–5.1 GHz). The filter configurations are fed using stepped-impedance open stub technique to reduce cross coupling between adjacent structures. Moreover effects of several salient filter parameters like gap between edge of the microstrip coupled line resonator and via series GV and gap between mid-point of the open ended feed line and via row GM are studied to achieve greater isolation at higher frequencies. All simulated designs are fabricated and experimentally studied to vindicate the practical performance of all filter configurations.

Keywords

Stepped impedance open stub (SIOS) Defected ground structure (DGS) Microstrip coupled line Inductive posts Band pass filter (BPF) 

Notes

References

  1. 1.
    Cheng, C. F., Huang, T. Y., & Wu, R. B. (2006). Design of dual and triple passband filters using alternately cascaded multiband resonators. IEEE Transactions on Microwave Theory and Techniques, 54(09), 3550–3558.CrossRefGoogle Scholar
  2. 2.
    Hsu, C. I. G., Lee, C. H., & Hsieh, Y. H. (2008). Tri band bandpass filter with sharp passband skirts designed using tri-section SIRs. IEEE Microwave and Wireless Components Letters, 18(01), 19–21.CrossRefGoogle Scholar
  3. 3.
    Wu, H. W., & Yang, R. Y. (2011). A new quad-band bandpass filter using asymmetric stepped impedance resonator. IEEE Microwave and Wireless Components Letters, 21(04), 203–205.CrossRefGoogle Scholar
  4. 4.
    Wei, F., Qin, P. Y., Guo, Y. J., Ding, C., & Shi, X. W. (2016). Compact balanced dual and tri band BPFs based on coupled complementary split ring resonators (C-CSRR). IEEE Microwave and Wireless Components Letters, 26(02), 107–109.CrossRefGoogle Scholar
  5. 5.
    Feng, W. J., Hong, M. L., Che, W. Q., & Xue, Q. (2017). Dual band microstrip bandstop filter with multiple transmission poles using coupled lines. IEEE Microwave and Wireless Components Letters, 27(03), 236–238.CrossRefGoogle Scholar
  6. 6.
    Ahn, H. R., & Nam, S. (2011). Wideband coupled line microstrip filters with high impedance short circuited stubs. IEEE Microwave and Wireless Components Letters, 21(11), 586–588.CrossRefGoogle Scholar
  7. 7.
    Tang, C. W., Tseng, C. T., Chiu, S. H., & Wu, P. H. (2013). Design of wide passband/stopband microstrip bandpass filters with the stepped coupled line. IEEE Transactions on Microwave Theory and Techniques, 61(05), 1095–1103.CrossRefGoogle Scholar
  8. 8.
    Singh, P. K., Basu, S., & Wang, Y. H. (2007). Planar ultrawideband bandpass filter using edge couple microstrip lines and stepped impedance open stubs. IEEE Microwave and Wireless Components Letters, 17(09), 649–651.CrossRefGoogle Scholar
  9. 9.
    Danaeian, M., Zarezadeh, E., & Zadeh, H. G. (2018). A compact and high performance dual-band bandpass filter based on unbalanced composite right/left-handed transmission lines for WLAN applications. Journal of Analog Integrated Circuits and Signal Processing., 94(3), 469–479.CrossRefGoogle Scholar
  10. 10.
    Park, J. S., Yun, J. S., & Ahn, D. (2002). A design of the novel coupled line bandpass filter using defected ground structure with wide stopband performance. IEEE Transactions on Microwave Theory and Techniques, 50(09), 2037–2043.CrossRefGoogle Scholar
  11. 11.
    Woo, D. J., Lee, T. K., Lee, J. W., Pyo, C. S., & Choi, W. K. (2006). Novel U-slot and V-slot DGSs for bandstop filter with improved Q-factor. IEEE Transactions on Microwave Theory and Techniques, 54(06), 2840–2847.CrossRefGoogle Scholar
  12. 12.
    Ren, L. Y. (2010). Tri-band bandpass filters based on dual plane microstrip/DGS slot structure. IEEE Microwave and Wireless Components Letters, 20(08), 429–431.CrossRefGoogle Scholar
  13. 13.
    Rahman, A. A., Verma, A. K., Boutejdar, A., & Omar, A. S. (2004). Compact stub type microstrip bandpass filter using defected ground plane. IEEE Microwave and Wireless Components Letters, 14(04), 136–138.CrossRefGoogle Scholar
  14. 14.
    Park, J. S., Yun, J. S., & Park, C. S. (2007). DGS resonator with interdigital capacitor and application to bandpass filter design. IET Electronics Letters, 40(07), 433–434.CrossRefGoogle Scholar
  15. 15.
    Ren, L. Y., & He, H. (2009). Wide stopband bandpass filter based on dual plane microstrip/interdigital DGS slot structure. IET Electronics Letters, 45(25), 1331–1332.CrossRefGoogle Scholar
  16. 16.
    Zhang, R., & Zhu, L. (2014). Synthesis and design of dual wideband bandpass filters with internally coupled microstrip lines. IET Microwaves, Antennas & Propagation, 08(08), 556–563.CrossRefGoogle Scholar
  17. 17.
    Tang, C. W. (2007). Design of a microstrip filter using multiple capacitively loaded coupled lines. IET Microwaves, Antennas & Propagation, 01(03), 651–657.CrossRefGoogle Scholar
  18. 18.
    Feng, W., & Che, W. (2016). Compact wideband differential filter using quarter wavelength coupled line. Journal of Electromagnetic Waves and Applications, 30(11), 1381–1390.CrossRefGoogle Scholar
  19. 19.
    Weng, M. H., Huang, C. Y., Hung, C. Y., & Lan, S. W. (2012). Design of a ultrawideband bandpass filter by using coupled three line microstrip structure. Journal of Electromagnetic Waves and Applications, 26(05), 716–728.CrossRefGoogle Scholar
  20. 20.
    Gopal, B. G., & Rajamani, V. (2018). Design of X band parallel coupled line BPF by analytical approach. Journal of Analog Integrated Circuits and Signal Processing., 96(03), 469–474.CrossRefGoogle Scholar
  21. 21.
    Lamperez, A. G., & Palma, M. S. (2011). Single band to multi-band frequency transformation for multiband filters. IEEE Transactions on Microwave Theory and Techniques, 59(12), 3048–3058.CrossRefGoogle Scholar
  22. 22.
    Wang, X. H., Hu, S., & Cao, Q. Y. (2014). Differential broadband filter based on microstrip coupled line structures. IET Electronics Letters, 50(15), 1069–1070.CrossRefGoogle Scholar
  23. 23.
    Podcameni, A., & Conrado, L. F. (1981). Broadbanding the quarterwave transformer using two parallel stubs. IET Electronics Letters, 17(11), 372–374.CrossRefGoogle Scholar
  24. 24.
    Fuzy, C., & Zolomy, A. (2010). Design of broadband complex impedance matching networks and their applications for broadbanding microwave amplifiers. In IEEE proceedings of 18th international conference on microwave radar and wireless communications. Google Scholar
  25. 25.
    Ezanuddin, A. A. A., Soh, P. J., Ooi, S. L., & Majmi, M. M. (2009). Miniaturization and broadbanding techniques for folded meander line microstrip antennas. In IEEE proceedings of international workshop on antenna technology (pp. 1–4).Google Scholar
  26. 26.
    Ray, K. P., Thakur, S. S., & Deshmukh, R. A. (2009). Broadbanding a printed rectangular monopole antenna. In IEEE proceedings of applied electromagnetics conference (pp. 1–4).Google Scholar
  27. 27.
    Moitra, S., Mondal, B., Kundu, J., Mukhopadhyay, A. K., & Bhattacharjee, A. K. (2013). Substrate integrated waveguide (SIW) filter using stepped inductive posts for Ku band applications. In IEEE proceedings of 3rd international conference on computational intelligence and information technology (pp. 398–401).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • Sourav Moitra
    • 1
    Email author
  • Ranjan Dey
    • 1
  • Partha Sarathee Bhowmik
    • 2
  1. 1.Department of Electronics and Communication EngineeringDr. B C Roy Engineering College, DurgapurDurgapurIndia
  2. 2.Department of Electrical EngineeringNational Institute of Technology, DurgapurDurgapurIndia

Personalised recommendations