Advertisement

Agroforestry Systems

, Volume 82, Issue 1, pp 77–86 | Cite as

Mechanized thinning of walnut plantations established on ex-arable land

  • Natascia Magagnotti
  • Carla Nati
  • Gianni Picchi
  • Raffaele SpinelliEmail author
Article

Abstract

The study compares two product strategies—chips versus firewood—and two technological levels—manual versus mechanized—as applied to the thinning of walnut agroforestry plantations, established on ex-arable land. Such plantations are widespread all across Europe, and their establishment was subsidized under the provisions of EU Directive 2080/90, and of regional grant schemes. Field test data were used to build a simple deterministic model for estimating thinning productivity and cost under varying work and economic conditions. This model can assist prospective users when checking the profitability of an operation, or when assessing the competitiveness of alternative options. Removing nurse alder from young walnut plantations yields between 25 and 50 t of fresh biomass per hectare and is crucial to the good development of the stand. The study shows that the removal of nurse alder from walnut plantations is economically viable, and it can also offer some profits if stand and market conditions are favourable. As a rule, the average DBH of removal trees should not be smaller than 12 cm. Best results are obtained with mechanized harvesting, which does not seem to cause heavier stand and soil damage than manual harvesting. Manual harvesting is preferable only if the annual utilization of machinery is very low, and in this case it should be geared to firewood production. The manual whole-tree harvesting (WTH) method used in this study offers the lowest performance under all conditions, and should be replaced with some other manual alternative to WTH. Mechanized WTH offers a significant cost reduction over mechanized short-wood (SWS) harvesting, but this difference is still rather limited: hence, other parameters come into play when deciding what system to apply, and namely product price and mass output. In this respect, one also has to consider the cost of managing the harvesting residue, and that of fertilizing, if soil nutrient depletion is to be feared.

Keywords

Thinning Hardwood plantations Harvesting Alder Firewood Chips 

Notes

Acknowledgments

The Authors would like to thank the Provincial Administration of Vicenza (field support), the municipality of Montecchio Precalcino (field support), Veneto Agricoltura (project funding), the Lombardy Region (project funding) and Agriteam (project coordination).

References

  1. Adebayo A, Han H, Johnson L (2007) Productivity and cost of cut-to-length and whole-tree harvesting in a mixed-conifer stand. For Prod J 57:59–69Google Scholar
  2. Bendfeldt E, Feldhake C, Burger J (2001) Establishing trees in an Appalachian silvopasture: response to shelters, grass control, mulch, and fertilization. Agrofor Syst 53:291–295CrossRefGoogle Scholar
  3. Bergstrand KG (1991) Planning and analysis of forestry operation studies. Skogsarbeten Bulletin No. 17, 63 ppGoogle Scholar
  4. Björheden R (2008) Optimal point of comminution in the biomass supply chain. In: Proceedings of the Nordic-Baltic conference on forest operations, Copenhagen, 23–25 September 2008. Danish Forest and Landscape, CopenhagenGoogle Scholar
  5. Björheden R, Apel K, Shiba M, Thompson MA (1995) IUFRO forest work study nomenclature. Department of Operational Efficiency, Swedish University of Agricultural Science, Garpenberg, p 16Google Scholar
  6. Bohanek J, Groninger J (2003) Impacts of intensive management on black walnut growth and bole quality at mid-rotation. For Sci 49:522–529Google Scholar
  7. Bohanek J, Groninger J (2005) Productivity of European black alder (Alnus glutinosa) interplanted with black walnut (Juglans nigra) in Illinois, USA. Agrofor Syst 64:99–106CrossRefGoogle Scholar
  8. Chifflot V, Bertoni G, Cabanettes A, Gavaland A (2006) Beneficial effects of intercropping on the growth and nitrogen status of young wild cherry and hybrid walnut trees. Agrofor Syst 66:13–21CrossRefGoogle Scholar
  9. Cogliastro A, Gagnon D, Bouchard A (1997) Experimental determination of soil characteristics optimal for the growth of ten hardwoods planted on abandoned farmland. For Ecol Manage 96:49–63CrossRefGoogle Scholar
  10. Colletti L (2001) Risultati dell’applicazione del Regolamento CEE 2080/92 in Italia. Sherwood 70:23–31Google Scholar
  11. Cummings J, Reid N (2008) Stand-level management of plantations to improve biodiversity values. Biodivers Conserv 17:1187–1211CrossRefGoogle Scholar
  12. Cutter B, Coggeshall M, Phelps J, Stokke D (2004) Impacts of forest management activities on selected hardwood wood quality attributes: a review. Wood Fiber Sci 36:84–97Google Scholar
  13. De Scisciolo B, Leopold D, Walton D (1990) Seasonal patterns of juglone in soil beneath Juglans nigra (black walnut) and influence of J. nigra on understory vegetation. J Chem Ecol 16:1111–1130CrossRefGoogle Scholar
  14. Dupraz C (1994) Prospects for easing land tenure conflicts with agroforestry in Mediterranean France: a research approach for intercropped timber orchards. Agrofor Syst 25:181–192CrossRefGoogle Scholar
  15. Dupraz C, Simorte V, Dauzat M, Bertoni G, Bernadac A, Masson P (1999) Growth and nitrogen status of young walnuts as affected by intercropped legumes in a Mediterranean climate. Agrofor Syst 43:71–80CrossRefGoogle Scholar
  16. Eriksson E (2006) Thinning operations and their impact on biomass production in stands of Norway spruce and Scots pine. Biomass Bioenergy 30:848–854CrossRefGoogle Scholar
  17. Fady B, Ducci F, Aleta N, Becquey J, Diaz Vazquez R, Fernandez Lopez F, Jay-Allemand C, Lefevre F, Ninot A, Panetsos K, Paris P, Pisanelli A, Rumpf H (2003) Walnut demonstrates strong genetic variability for adaptive and wood quality traits in a network of juvenile field tests across Europe. New For 25:211–225CrossRefGoogle Scholar
  18. Fisher R (1978) Juglone inhibits pine growth under certain moisture regimes. Soil Sci Soc Am J 42:801–803CrossRefGoogle Scholar
  19. Friedrich J, Dawson J (1984) Soil nitrogen concentration and Juglans nigra growth in mixed plots with nitrogen-fixing Alnus, Elaeagnus, Lespedeza and Robinia species. Can For Res 14:864–868CrossRefGoogle Scholar
  20. Gauthier M, Jacobs D (2010) Ecophysiological responses of black walnut (Juglans nigra) to plantation thinning along a vertical canopy gradient. For Ecol Manage 259:867–874CrossRefGoogle Scholar
  21. Gold M, Hanover J (1987) Agroforestry systems for the temperate zones. Agrofor Syst 5:109–121CrossRefGoogle Scholar
  22. Gullberg T (1995) Evaluating operator-machine interactions in comparative time studies. Int J For Eng 7:51–61Google Scholar
  23. Kofman P (1995) Siwork 3: User Guide. Danish Forest and Landscape Research Institute, Vejle, 37 ppGoogle Scholar
  24. Kofman P, Kent T (2007) Harvesting and processing forest biomass for energy production in Ireland. In: The ForestEnergy 2006 programme. COFORD, Dublin, p 68. ISBN-1-902696-56-5Google Scholar
  25. Laitila J, Asikainen A (2006) Energy wood logging from early thinnings by harwarder method. Baltic For 12:94–102Google Scholar
  26. Laitila J, Kärhä K, Jylhä P (2009) Time consumption models and parameters for off- and on-road transportation of whole-tree bundles. Baltic For 15:105–114Google Scholar
  27. Lehmkuhler J, Kerley M, Garrett H, Cutter B, McGraw R (1999) Comparison of continuous and rotational silvopastoral systems for established walnut plantations in southwest Missouri, USA. Agrofor Syst 44:267–279CrossRefGoogle Scholar
  28. Limbeck-Lilienau B (2003) Residual stand damage caused by mechanized harvesting systems. In: Limbeck-Lilienau, Steinmüller, Stampfer (eds) Proceedings of the Austro2003 meeting: High Tech Forest Operations for Mountainous Terrain, Schlaegl, Austria, October 5–9, 2003, p 11. CD ROMGoogle Scholar
  29. Mary F, Dupraz C, Delannoy E, Liagre F (1999) Incorporating agroforestry practices in the management of walnut plantations in Dauphiné, France: an analysis of farmers’ motivations. Agrofor Syst 43:243–256CrossRefGoogle Scholar
  30. Mead D (2005) Opportunities for improving plantation productivity. How much? How quickly? How realistic? Biomass Bioenergy 28:249–266CrossRefGoogle Scholar
  31. Minotta G (2002) Gli impianti di latifoglie pregiate: una risorsa da valorizzare. Monti e Boschi 2:3Google Scholar
  32. Miyata ES (1980) Determining fixed and operating costs of logging equipment. General Technical Report NC-55. Forest Service North Central Forest Experiment Station, St. Paul, 14 ppGoogle Scholar
  33. Nord-Larsen T (2002) Stand and site productivity response following whole-tree harvesting in early thinnings of Norway spruce. Biomass Bioenergy 23:1–12CrossRefGoogle Scholar
  34. Olsen E, Hossain M, Miller M (1998) Statistical comparison of methods used in harvesting work studies, Research Contribution No. 23. Forest Research Laboratory, Oregon State University, Corvallis, 31 ppGoogle Scholar
  35. Paris P, Olimpieri G, Todaro L, Cannata F (1998) Leaf-water potential and soil-moisture depletion of walnut mulched with polyethylene and intercropped with alfalfa in central Italy. Agrofor Syst 40:69–81CrossRefGoogle Scholar
  36. Ponder F (1998) Fertilizer combinations benefit diameter growth of plantation black walnut. J Plant Nutr 21:1329–1337CrossRefGoogle Scholar
  37. Rietveld W, Schlesinger R, Kessler K (1983) Allelopathic effects of black walnut on European black alder coplanted as a nurse species. J Chem Ecol 9:1119–1133CrossRefGoogle Scholar
  38. SAS Institute Inc. (1999) StatView Reference. SAS Publishing, Cary, NC, pp 84–93. ISBN-1-58025-162-5Google Scholar
  39. Schlesinger R, Williams R (1984) Growth response of black walnut to interplanted trees. For Ecol Manage 9:235–243CrossRefGoogle Scholar
  40. Schneider U, McCarl B (2003) Economic potential of biomass based fuels for greenhouse gas emission mitigation. Environ Resour Econ 24:291–312CrossRefGoogle Scholar
  41. Scott A (1973) Work measurement: observed time to standard time. In: Wittering W (ed) Work study in forestry. Forestry Commission Bulletin No. 47, pp 26–39Google Scholar
  42. Scott R, Sullivan W (2003) A review of suitable companion crops for black walnut. Agrofor Syst 71:185–193Google Scholar
  43. Siardi E, Alberti G (2005) Imboschimenti realizzati con il PSR. Sherwood No. 117, pp 39–44Google Scholar
  44. Spinelli R, Hartsough B (2001) A survey of Italian chipping operations. Biomass Bioenergy 21:433–444CrossRefGoogle Scholar
  45. Spinelli R, Magagnotti N (2010) Performance and cost of a new mini-forwarder for use in thinning operations. J For Res. doi: 10.1007/s10310-010-0193-x
  46. Spinelli R, Visser R (2008) Analyzing and estimating delays in harvester operations. Int J For Eng 19:35–40Google Scholar
  47. Spinelli R, Visser R (2009) Analyzing and estimating delays in wood chipping operations. Biomass Bioenergy 33:429–433CrossRefGoogle Scholar
  48. Spinelli R, Nati C, Magagnotti N (2006) Biomass harvesting from buffer strips in Italy: three options compared. Agrofor Syst 68:113–121CrossRefGoogle Scholar
  49. Spinelli R, Nati C, Magagnotti N (2009) Using modified foragers to harvest short-rotation poplar plantations. Biomass Bioenergy 33:817–821CrossRefGoogle Scholar
  50. Talbot B, Suadicani K (2005) Analysis of two simulated in-field chipping and extraction systems in spruce thinnings. Biosyst Eng 91:283–292CrossRefGoogle Scholar
  51. Velge F, Harrison S (2009) Financing methods for small-scale hardwood plantations in Queensland, Australia. Small-Scale For 8:411–424CrossRefGoogle Scholar
  52. Venn T (2005) Financial and economic performance of long-rotation hardwood plantation investments in Queensland, Australia. For Policy Econ 7:437–454Google Scholar

Copyright information

© Springer Science+Business Media B.V. 2010

Authors and Affiliations

  • Natascia Magagnotti
    • 1
  • Carla Nati
    • 2
  • Gianni Picchi
    • 1
  • Raffaele Spinelli
    • 2
    Email author
  1. 1.CNR IVALSASan Michele all’AdigeItaly
  2. 2.CNR IVALSASesto FiorentinoItaly

Personalised recommendations