A robust dynamic column breakthrough technique for high-pressure measurements of adsorption equilibria and kinetics
- 423 Downloads
Adsorption equilibria and kinetics of N2 and CH4 on four adsorbents, namely commercial activated carbon Norit RB3, zeolite 13X, zeolite 4A and molecular sieving carbon MSC-3K 172, were measured at temperatures of (273 and 303) K in the pressure range of (25–900) kPa using an improved dynamic breakthrough apparatus. Equilibrium adsorption measurements were performed with breakthrough experiments, and sorption kinetics were measured with a chromatographic pulse technique to eliminate undesirable systematics such as buoyancy and limitations imposed by heat transfer in conventional breakthrough techniques. The differential equations governing the spreading of a pulse passing through the column were solved in the Laplace domain to reduce numerical dispersion and artefacts associated with solving these equations for adsorption in the time domain on a finite grid. A method for identifying the reliable measurement range of sorption rates (mass transfer coefficients) from 10−4 to 1 s−1 was proposed and demonstrated with the four adsorbents. The sorption rates for Norit RB3 and zeolite 13X had values above the upper resolvable limit of 1 s−1. The measured sorption rates for MSC-3K 172 and zeolite 4A were compared with values obtained independently using a static volumetric method on the same adsorbents at the same temperatures but over a lower pressure range (0–110 kPa) (Xiao et al., Adsorption 23 (2017) 131–147). The sorption rates obtained for the two adsorbents via these two independent techniques were consistent within the measurement uncertainty of each method, which significantly increases the confidence with which these values can be used in simulations of industrial PSA processes.
KeywordsAdsorption kinetics Commercial adsorbents Chromatographic pulse Volumetric method Nitrogen Methane
This research was supported by the Department of Environment Regulation of Western Australia through its Low Emissions Energy Development (LEED) Fund and by the Australian Research Council through GL’s Discovery Early Career Researcher Award (DE140101824), and the Industrial Transformation Training Centre program (IC150100019).
- Holland, F.A., Bragg R.: Fluid flow for chemical engineers, 2nd edn. Butterworth-Heinemann, Oxford (1995)Google Scholar
- IPCC: Working group I contribution to the fifth assessment report of the intergovernmental panel on climate change (2013)Google Scholar
- Kidnay, A.J., Parrish, W.: Fundamentals of natural gas processing. CRC Press, Boca Raton (2006)Google Scholar
- Ruthven, D.M.: Principles of adsorption and adsorption processes. Wiley, New York (1984)Google Scholar
- Ruthven, D.M., Farooq, S., Knaebel, K.S.: Pressure swing adsorption. VCH Publishers, New York (1994)Google Scholar
- Saleman, T.L.H., Watson, G.C.Y., Rufford, T.E., Hofman, P.S., Chan, K.I., May, E.F.: Capacity and kinetic measurements of methane and nitrogen adsorption on H+-mordenite at 243–303 K and pressures to 900 kPa using a dynamic column breakthrough apparatus. Adsorption 19, 1165–1180 (2013)CrossRefGoogle Scholar