Advertisement

Adaptive Path Planning of Fiber Placement Based on Improved Method of Mesh Dynamic Representation

  • Leen ZhangEmail author
  • Xiaoping Wang
  • Jingyu Pei
  • Chunbo Nian
Article
  • 30 Downloads

Abstract

Path planning for fiber placement is one of the research hotspots on composite fiber placement forming technology. The problem how to realize adaptive planning of placement path has great significance in improving the efficiency of automatic fiber placement and shortening product manufacturing period. Firstly, with the numerical simulation of moving interface, the iterative generation and wave propagation of reference path are simulated on the mesh surface, and the mesh dynamic representation (MDR) of fiber placement paths is realized. Then, through improvement on proposed algorithm, an optimal reference path which assures all the fiber directions to meet the requirements of product structure design is sought automatically, and thus adaptive planning of placement path is realized. The simulated automatic fiber placement mechanism can generate a series of equidistant paths through the equidistant propagation of reference path, by which the overlap and gap of fiber tows are avoided, and the quality of fiber placement is improved. Finally, the simple and complex surfaces for fiber placement are analyzed with finite element in the numerical experiment, and the obtained equidistant paths and fiber directions show the efficiency of the proposed method.

Keywords

Mesh dynamic representation Fiber placement Path planning Adaptive Equidistant placement 

Notes

Acknowledgments

First of all, thank the reviewers for their hard review, and give them the highest respect and heartfelt thanks. Secondly, this work is supported by the National Natural Science Foundation of China under grant No. 51575266.

References

  1. 1.
    Crosky A., Grant C., Kelly D. W., et al: Fiber placement processes for composites manufacture. In: Boisse P. (eds.) Advances in Composites Manufacturing & Process Design, pp. 79-92. Elsevier, Paris France (2015)Google Scholar
  2. 2.
    Blom, A.W., Stickler, P.B., Gürdal, Z.: Optimization of a composite cylinder under bending by tailoring stiffness properties in circumferential direction. Compos. Part B. 41(2), 157–165 (2010)CrossRefGoogle Scholar
  3. 3.
    Parnas, L., Oral, S., Ceyhan, Ü.: Optimum design of composite structures with curved fiber courses. Compos. Sci. Technol. 63(7), 1071–1082 (2003)CrossRefGoogle Scholar
  4. 4.
    Blom, A.W., Tatting, B.F., Hol, J.M.A.M., Gürdal, Z.: Fiber path definitions for elastically tailored conical shells. Compos. Part B. 40(1), 77–84 (2009)CrossRefGoogle Scholar
  5. 5.
    Lu M., Zhou L. S., Wang X. P.: Optimization of fiber steering in composite laminates using a curve projection algorithm. CMES. 22(16), 1993-1996 (2011)Google Scholar
  6. 6.
    Yan, L., Wang, F.Z., Shi, Y.Y.: Path planning algorithm for fiber placement based on non-equidistant offset. Acta Aeronautica ET Astronautica Sinica. 36(11), 3715–3723 (2015)Google Scholar
  7. 7.
    Shirinzadeh, B., Cassidy, G., Oetomo, D., Alici, G., Ang Jr, M.H.: Trajectory generation for open-contoured structures in robotic fiber placement. Robot. Comput. Integr. Manuf. 23(4), 380–394 (2007)CrossRefGoogle Scholar
  8. 8.
    Waldhart C., Gurdal Z., Ribbens C.: Analysis of tow placed, parallel fiber, variable stiffness laminates. In: AIAA/ASME/ASCE/AHS/ASC, 37th SDM Conf., Salt Lake City, UT, U.S.A. (2013)Google Scholar
  9. 9.
    Lu, M., Zhou, L.S., Wang, X.P.: Trajectory generation for cylindrical structures in robotic multi-fiber placement. Acta Aeronautica ET Astronautica Sinica. 32(1), 181–186 (2011)Google Scholar
  10. 10.
    Dang X. D., Xiao J., Huan D. J.: Realization of parallel equidistant trajectory planning algorithm for automatic fiber placement. WHUJNS. 53(5), 613-616 (2007)Google Scholar
  11. 11.
    Schueler, K., Miller, J., Hale, R.: Approximate geometric methods in application to the modeling of fiber placed composite. J. Comput. Inf. Sci. Eng. 4(3), 251–256 (2004)CrossRefGoogle Scholar
  12. 12.
    Pei, J.Z., Wang, X.P., Pei, J.Y., et al.: Path planning based on ply orientation information for automatic fiber placement on mesh surface. Appl. Compos. Mater. 10, 1–14 (2018)CrossRefGoogle Scholar
  13. 13.
    Treister, E., Haber, E.: A fast marching algorithm for the factored eikonal equation. J. Comput. Phys. 324, 210–225 (2016)CrossRefGoogle Scholar
  14. 14.
    Mesuda, Y., Inui, S., Horiba, Y.: Virtual draping by mapping. Comput. Ind. 95, 93–101 (2018)CrossRefGoogle Scholar
  15. 15.
    Qian, J., Zhang, Y.T., Zhao, H.K.: Fast sweeping methods for eikonal equations on triangular meshes. SIAM J. Numer. Anal. 45(1), 83–107 (2007)CrossRefGoogle Scholar
  16. 16.
    Bacigalupoa, A., Lepidi, M.: Acoustic wave polarization and energy flow in periodic beam lattice materials. Int. J. Solids Struct. 147, 183–203 (2018).  https://doi.org/10.1016/j.ijsolstr.2018.05.025 CrossRefGoogle Scholar
  17. 17.
    Volpe, F.A., Létourneau, P.D., Zhao, A.: Huygens–Fresnel wavefront tracing. Comput. Phys. Commun. 212, 123–131 (2017)CrossRefGoogle Scholar
  18. 18.
    Yan, J., Cheng, C.: Dynamic representation method of target in remote sensed images based on global subdivision grid. Geoscience and Remote Sensing Symposium. IEEE. 2014:3097–3100 (2014)Google Scholar
  19. 19.
    Wang, X., Samulyak, R., Jiao, X., Yu, K.: AP-cloud: adaptive particle-in-cloud method for optimal solutions to Vlasov–Poisson equation. J. Comput. Phys. 316, 682–699 (2016)CrossRefGoogle Scholar
  20. 20.
    Zhou, C.Y.: Finite element analysis and application of SAMCEF, pp. 133–147. Mechanical Industry Press, Beijing (2015)Google Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  1. 1.College of Mechanical and ElectricalNanjing University of Aeronautics and AstronauticsNanjingChina
  2. 2.Engineering Research Center for CAD/CAMNanjing University of Aeronautics and AstronauticsNanjingChina

Personalised recommendations