Reducing the anisotropy of a Brazilian disc generated in a bonded-particle model
- 193 Downloads
The Brazilian test is a widely used method for determining the tensile strength of rocks and for calibrating parameters in bonded-particle models (BPMs). In previous studies, the Brazilian disc has typically been trimmed from a compacted rectangular specimen. The present study shows that different tensile strength values are obtained depending on the compressive loading direction. Several measures are proposed to reduce the anisotropy of the disc. The results reveal that the anisotropy of the disc is significantly influenced by the compactibility of the specimen from which it is trimmed. A new method is proposed in which the Brazilian disc is directly generated with a particle boundary, effectively reducing the anisotropy. The stiffness (particle and bond) and strength (bond) of the boundary are set at less than and greater than those of the disc assembly, respectively, which significantly decreases the stress concentration at the boundary contacts and prevents breakage of the boundary particle bonds. This leads to a significant reduction in the anisotropy of the disc and the discreteness of the tensile strength. This method is more suitable for carrying out a realistic Brazilian test for homogeneous rock-like material in the BPM.
KeywordsBonded-particle model Brazilian disc Anisotropy Compactibility Particle boundary
Support provided by the National Basic Research Program of China (2015CB258500, 2015CB058102, 2014CB046904) is gratefully acknowledged.
- 1.The International Society for Rock Mechanics (ISRM): Suggested methods for determining tensile strength of rock materials. Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 15, 99–103 (1978)Google Scholar
- 23.He, J., Afolagboye, L.O.: Influence of layer orientation and interlayer bonding force on the mechanical behavior of shale under Brazilian test conditions. Acta Mech. Sin. 1–10 (2017)Google Scholar
- 31.Zhang, X.P., Wong, L.N.Y.: Cracking processes in rock-like material containing a single flaw under uniaxial compression: a numerical study based on parallel bonded-particle model approach. Rock Mech. Rock Eng. 45, 711–737 (2012)Google Scholar
- 37.Hung, K.M., Ma, C.C.: Theoretical analysis and digital photoelastic measurement of circular disks subjected to partially distributed compressions. Exp. Mech. 43, 216–224 (2003)Google Scholar
- 39.Itasca: (Particle Flow Code in 2 Dimensions) version 3.1. Itasca Cons Group, Minneapolis (2004)Google Scholar
- 45.Inoue, K., Shimizu, N., Funatsu, T.: Influence of clump radius on the mechanical properties of hard rock in the clumped particle model. In: Proceedings of Meeting, Korean, October, 153–160 (2009)Google Scholar
- 49.Sarmadivaleh, M.: Experimental and numerical study of interaction of a pre-existing natural interface and an induced hydraulic fracture. [PhD Thesis], Curtin University (2012)Google Scholar
- 50.Zhao, X.: Imaging the mechanics of hydraulic fracturing in naturally-fractured reservoirs using induced seismicity and numerical modeling. [PhD Thesis], University of Toronto (2012)Google Scholar
- 55.Nakashima, S., Taguchi, K., Shimizu, N., et al.: Effect of element configuration on Brazilian tensile failure by DEM. In: ISRM International Symposium, Sapporo, Japan, October 14–16 (2014)Google Scholar
- 56.Duan, K., Kwok, C.Y.: Discrete element modeling of anisotropic rock under Brazilian test conditions. Int. J. Rock Mech. Min. Sci. 78, 46–56 (2015)Google Scholar
- 58.Zhu, X., Liu, W., He, X.: The investigation of rock indentation simulation based on discrete element method. KSCE J. Civil Eng. 21, 1–12 (2016)Google Scholar