Advertisement

Studying V-Notch Stress Intensity Factor by Digital Gradient Sensing Method

  • Dedeng Chen
  • Rui ZhangEmail author
  • Ran Guo
Article

Abstract

The stress intensity factor (SIF) at the V-notch tip of a single-edge-notched polymethyl methacrylate plate was measured by the digital gradient sensing (DGS) method. First, the displacement fields near the V-notch tip of the specimen were recorded using digital image correlation under three-point bending. Second, the stress gradient function of the V-notch tip with unknown SIF was deduced from the Williams series expansion for singular elastic stress fields. Finally, the relationship between the stress gradient and the angular deflection around the V-notch tip was established according to the photoelastic effect. Combined with the theory of linear elastic fracture mechanics, it was derived that the angular deflection of each point can be expressed with the unknown SIF. Considering the unavoidable effects of rigid-body translation and rotation in the experiments, the new angular deflection control equation was derived based on the traditional angular deflection control equation. The SIF was obtained by the least square method. The experimental values calculated by the new control equation were compared with the analytical values. The result shows that the DGS method can accurately measure the SIF at the V-notch tip, which effectively improves the accuracy of SIF.

Keywords

Digital gradient sensing (DGS) V-notch Angular deflection Stress intensity factor (SIF) Least square method 

Notes

Acknowledgements

The work is supported by the National Basic Research Program of China (under Grant No. 14118683); China Postdoctoral Science Foundation (under Grant No. 2014M552548XB); and the National Natural Science Foundation of China (under Grant No. 11402103).

References

  1. 1.
    Nui LS, Chehimi C, Pluvinage G. Stress field near a large blunted tip V-notch and application of the concept of the critical notch stress intensity factor (NSIF) to the fracture toughness of very brittle materials[J]. Eng Fract Mech. 1994;49(3):325–35.Google Scholar
  2. 2.
    Zappalorto M, Lazzarin P. Strain energy-based evaluations of plastic notch stress intensity factors at pointed V-notches under tension. Eng Fract Mech. 2011;78:2691–706.Google Scholar
  3. 3.
    Meneghetti G, Guzzella C. The peak stress method to estimate the mode I notch stress intensity factor in welded joints using three-dimensional finite element models. Eng Fract Mech. 2014;115(1):154–71.Google Scholar
  4. 4.
    Graff S, Forest S, Strudel J, Prioul C, Pilvin P, Béchade J. Finite element simulations of dynamic strain ageing effects at V-notches and crack tips. Scripta Mater. 2005;52:1181–6.Google Scholar
  5. 5.
    Yao XF, Yeh HY, Xu W. Fracture investigation at V-notch tip using coherent gradient sensing (CGS). Int J Solids Struct. 2006;43:1189–200.zbMATHGoogle Scholar
  6. 6.
    Prassianakis JN. Stress intensity factors at V-notched elastic, symmetrically loaded, plates by the method of caustics. J Phys D Appl Phys. 1980;13(6):1043.Google Scholar
  7. 7.
    Xu W, Xu W, Yeh HY, Jin GC. Fracture investigation of PMMA specimen using coherent gradient sensing (CGS) technology. Polym Exp. 2005;24:900–8.Google Scholar
  8. 8.
    Xu W, Yao XF, Xu MQ, et al. Fracture characterizations of V-notch tip in PMMA polymer material. Polym Exp. 2004;23(5):509–15.Google Scholar
  9. 9.
    Yadegari Dehnavi MR, Eshraghi I, Soltani N. Investigation of fracture parameters of edge V-notches in a polymer material using digital image correlation. Polym Exp. 2013;32:778–84.Google Scholar
  10. 10.
    Periasamy C, Tippur HV. A full-field digital gradient sensing method for evaluating stress gradients in transparent solids. Appl Opt. 2012;51(12):2088–97.Google Scholar
  11. 11.
    Zhang R, Guo R, Wang S. Mixed mode fracture study of PMMA using digital gradient sensing method. Eng Fract Mech. 2014;119(3):164–72.Google Scholar
  12. 12.
    Zhang R, Guo R, Cheng H. Combing DGS and finite element for stress analysis using inverse boundary method. Appl Opt. 2014;53(35):8350–7.Google Scholar
  13. 13.
    Zhang R. Evaluating angular deflections from the digital gradient sensing method with rigid-motion deleted. Meas Sci Technol. 2016;27(6):065202.Google Scholar
  14. 14.
    Yuan Y, Hao W, Ma Y. Stress field at V-notch tip in polymer materials using digital gradient sensing. Mech Compos Mater Struct. 2017;24(4):350–6.Google Scholar
  15. 15.
    Periasamy C, Tippur HV. Measurement of crack-tip and punch-tip transient deformations and stress intensity factors using digital gradient sensing technique. Eng Fract Mech. 2013;98(1):185–99.Google Scholar
  16. 16.
    Pan B, Xie H, Wang Z, et al. Study on subset size selection in digital image correlation for speckle patterns. Opt Express. 2008;16(10):7037–48.Google Scholar
  17. 17.
    Zhao Z, Hahn HG. Determining the SIF of a V-notch from the results of a mixed-mode crack. Eng Fract Mech. 1992;43(4):511–8.Google Scholar

Copyright information

© The Chinese Society of Theoretical and Applied Mechanics 2019

Authors and Affiliations

  1. 1.Department of Engineering MechanicsKunming University of Science and TechnologyKunmingChina

Personalised recommendations