New lager yeast strains generated by interspecific hybridization
- 5.4k Downloads
The interspecific hybrid Saccharomyces pastorianus is the most commonly used yeast in brewery fermentations worldwide. Here, we generated de novo lager yeast hybrids by mating a domesticated and strongly flocculent Saccharomyces cerevisiae ale strain with the Saccharomyces eubayanus type strain. The hybrids were characterized with respect to the parent strains in a wort fermentation performed at temperatures typical for lager brewing (12 °C). The resulting beers were analysed for sugar and aroma compounds, while the yeasts were tested for their flocculation ability and α-glucoside transport capability. These hybrids inherited beneficial properties from both parent strains (cryotolerance, maltotriose utilization and strong flocculation) and showed apparent hybrid vigour, fermenting faster and producing beer with higher alcohol content (5.6 vs 4.5 % ABV) than the parents. Results suggest that interspecific hybridization is suitable for production of novel non-GM lager yeast strains with unique properties and will help in elucidating the evolutionary history of industrial lager yeast.
KeywordsLager yeast S. eubayanus Brewing Hybrid Mating Heterosis
Pale lager is the most popular beer style worldwide. All beers of this type are produced through the fermentation of malt wort at low temperature with the interspecific hybrid yeast species Saccharomyces pastorianus . The formation of interspecific hybrids is common among the closely related species of the Saccharomyces genus, and the lager yeast S. pastorianus is a natural hybrid between S. cerevisiae and the newly discovered S. eubayanus . Hybrid species are common in anthropogenic environments and are not limited to yeast, as hybrid species often exhibit qualities superior to both parent strains [22, 33]. Lager beers have gained popularity due to their ‘clean’ flavour profile, i.e. lack of ester-derived fruity/floral aroma, resulting mainly from fermentation at low temperatures. Ale strains (S. cerevisiae) have over time been selected for beneficial brewing properties, such as flocculation, sugar utilization, and flavour profile, but require warmer temperatures (>15 °C) for optimal fermentation . In contrast, S. eubayanus thrives at the low temperatures responsible for the typical aroma profile of lager beer, but lacks the ability to utilize maltotriose (the most abundant sugar in wort after maltose) and exhibits poor flocculation .
The origins of lager yeast are not known, but it may be possible that the original hybridization event was due to S. eubayanus contaminating a traditional ale fermentation with S. cerevisiae . The S. pastorianus group consists of at least two distinct lineages (Saaz and Frohberg), which may have arisen independently [11, 23] or through a common hybridization event . While these two groups share many common features, they differ functionally in a number of respects, such as maltotriose utilization and cold tolerance [13, 34]. These functional differences seem to be reflected in the genomic difference between the groups (Saaz strains have retained proportionally more DNA derived from the S. eubayanus parent, while Frohberg strains have retained proportionally more DNA from the S. cerevisiae parent). Because lager yeasts are restricted to only these two genetically distinct groups, the genetic diversity among them is poor. However, through the selection of individual S. eubayanus and S. cerevisiae strains with specific desirable characteristics, and subsequent hybridization of these strains, it may be possible to produce novel, tailor-made yeast strains immediately available for industrial use.
The use of interspecific hybridization for generating ale and wine yeast strains with improved aroma production has been described [1, 12, 38, 39]. We here describe, for the first time, the use of mass mating to generate de novo lager yeast hybrids from a domesticated strongly flocculent S. cerevisiae ale strain and the S. eubayanus type strain. The hybrids were characterized with respect to the parent strains in a wort fermentation performed at temperatures typical for lager yeast, and the resulting beer was analysed for sugar content and the yeast was tested for its flocculation ability. The aim of this study was to demonstrate the generation of novel lager yeast strains with physiological properties inherited from both parental strains. This technique has the potential to greatly increase the diversity of yeast strains available for lager brewing . The yeast hybrids generated with this technique can also be seen as non-GM, and their use is thus not prevented by legislation or public opinion .
Materials and methods
The two parental strains were S. cerevisiae VTT-A81062 (VTT Culture Collection, Finland), a brewer’s yeast strain originally sourced from an ale beer from the United Kingdom, and the S. eubayanus type strain VTT-C12902 (VTT Culture Collection, Finland; deposited as CBS12357 at CBS-KNAW Fungal Biodiversity Centre). The four hybrid strains (A81062 × C12902) that were chosen for further characterization were named H1–H4. Natural auxotrophic mutants (lys- and ura-) of the parental strains were selected on α-aminoadipic and 5-fluoroorotic acid agar plates, respectively [4, 50]. Auxotrophy was confirmed by the inability to grow on minimal selection agar medium (0.67 % Yeast Nitrogen Base without amino acids, 3 % glycerol, 3 % ethanol and 2 % agar).
For the generation of ascospores, the auxotrophic mutants of the parental strains were first grown overnight in YPM medium (1 % yeast extract, 2 % peptone, 4 % maltose) at 20 °C. The yeast was then inoculated into pre-sporulation medium (0.8 % yeast extract, 0.3 % peptone, 10 % glucose) at an OD600 of 0.3 and allowed to grow for 20 h at 20 °C. The yeast was then washed with 1 % potassium acetate and a thick suspension was plated onto sporulation agar (1 % potassium acetate, 10 mg/L lysine and uracil, 2 % agar). The yeast was allowed to sporulate for 7 days at 25 °C. Sporulation efficiency was calculated by counting the frequency of ascospores stained with malachite green . Spore viability was calculated by dissecting ascospores treated with Zymolyase 100T (US Biological, USA) on YPD agar with a micromanipulator .
Generation of interspecific hybrids
Interspecific hybrids between a ura- isolate of S. cerevisiae A81062 and a lys- isolate of S. eubayanus C12902 were produced by first generating ascospores of the auxotrophic mutants as above. Ascospores were scraped off the agar into 1 ml sterile reverse-osmosis purified H2O in 2 ml Eppendorf tubes. Tubes were centrifuged at 5,000×g for 5 min and the supernatant was removed. Ascus walls were digested by the addition of 50 μl 1 mg/ml Zymolyase 100T and incubation at 30 °C for 20 min. 200 μl of sterile H2O was then added, and cells were resuspended by vortexing. 100 μl of the resulting suspensions from both parental strains, with complementary auxotrophic markers, were transferred together to 1 ml YPM medium in a sterile 2 ml Eppendorf tube. Tubes were vortexed and incubated statically at 25 °C for 7 days. After incubation, the tubes were centrifuged at 5,000×g for 5 min and the supernatant was removed. 500 μl of starvation medium (0.1 % yeast extract and 0.1 % glucose) was added, and tubes were incubated for at least 2 h at room temperature. Tubes were then vortexed, after which the approximate cell concentration of the resulting suspension was measured with a NucleoCounter YC-100 (ChemoMetec, Denmark) and 100 μl aliquots were spread onto minimal selection agar (without uracil or lysine). Plates were incubated at 25 °C, and prototrophic colonies (i.e. potential hybrids) appeared after 3–7 days. Colonies were counted and purified by replating on minimal selection agar.
Confirmation of hybrid status by PCR and RFLP
The hybrid status of isolates was confirmed by amplification of rDNA-PCR (ITS1, 5.8S and ITS2) using the primers ITS1 (5′-TCCGTAGGTGAACCTGCGG-3′) and ITS4 (5′-TCCTCCGCTTATTGATATGC-3′) and digestion of amplicons using the HaeIII restriction enzyme (New England BioLabs, USA) as described previously . Identification was based on the number of restriction fragments generated by enzyme digestion. S. eubayanus yielded a 3-band pattern (490, 225, 140 bp), S. cerevisiae a 4-band pattern (320, 225, 180, 140 bp), while successful hybrids yielded a pattern with all 5 bands (490, 320, 225, 180 and 140 bp).
Amplification of the S. eubayanus-specific FSY1 gene (amplicon size 228 bp) and the S. cerevisiae-specific MEX67 gene (amplicon size 150 bp) was also performed on the DNA extracted from the hybrid strains using the primers SeubF3 (5′-GTCCCTGTACCAATTTAATATTGCGC-3′), SeubR2 (5′-TTTCACATCTCTTAGTCTTTTCCAGACG-3′), ScerF2 (5′-GCGCTTTACATTCAGATCCCGAG-3′), and ScerR2 (5′-TAAGTTGGTTGTCAGCAAGATTG-3′) as described by Muir et al.  and Pengelly and Wheals . Hybrids were i€dentified by the presence of both genes.
Confirmation of hybrid status by PFGE
Yeast strains were propagated in YPM at 20 °C to an OD600 >1 and then harvested by centrifugation (3,000×g, 5 min, 4 °C). Supernatants were decanted, and cells were resuspended in 10 ml of 4 °C 50 mM EDTA (pH 8). Cell concentrations were determined with a Nucleocounter® YC-100™ (ChemoMetec) and 1.2 × 108 cells were placed in each sample plug. Sample plugs were prepared with the CHEF Genomic DNA Plug Kit for Yeast (Bio-Rad) according to the manufacturer’s instructions.
Sample plugs were loaded into the wells of a 1.0 % pulse field certified agarose (Bio-Rad) gel. PFGE was performed at 14 °C in 0.5× TBE buffer [89 mMTris, 89 mM boric acid, 2 mM EDTA (pH 8)]. A CHEF Mapper XA pulsed field electrophoresis system (Bio-Rad) was used with the following settings: 6 V/cm in a 120° angle, pulse length increasing linearly from 26 to 228 s, and total running time of 38 h. A commercial chromosome marker preparation from S. cerevisiae strain YNN295 (Bio-Rad) was used for molecular mass calibration. After electrophoresis, the gels were stained with ethidium bromide and scanned with Gel Doc XR+ imaging system (Bio-Rad).
DNA content by flow cytometry
Flow cytometry was performed on the yeast strains essentially as described by Haase and Reed . Cells were grown overnight in YPD medium (1 % yeast extract, 2 % peptone, 2 % glucose), and approximately 1 × 107 cells were washed with 1 mL of 50 mM citrate buffer. Cells were then fixed with cold 70 % ethanol and incubated at room temperature for 1 h. Cells were then washed with 50 mM citrate buffer, resuspended in 50 mM citrate buffer containing 0.25 mg mL−1 RNAse A and incubated overnight at 37 °C. 1 mg mL−1 of Proteinase K was then added, and cells were incubated for 1 h at 50 °C. Cells were then stained with SYTOX Green (2 μM; Life Technologies, USA), and their DNA content was determined using a FACSAria cytometer (Becton–Dickinson). DNA contents were estimated by comparing fluorescence intensities with those of S. cerevisiae haploid (CEN.PK113-1A) and diploid (CEN.PK) reference strains. Measurements were performed on duplicate independent yeast cultures, and 100,000 events were collected per sample during flow cytometry.
Characterization of hybrid strains
Four randomly selected hybrids (H1–H4) and the parental strains were chosen for further characterization in a small-scale wort fermentation performed at 12 °C. Yeast was propagated essentially as described previously , with the use of a ‘Generation 0’ fermentation prior to the actual experimental fermentations. The experimental fermentations were carried out in duplicate, in 2-L cylindroconical stainless steel fermenting vessels, containing 1.5 L of wort medium. The wort was produced at the VTT Pilot Brewery from barley malt and wheat malt, and contained an extract content of 12.0 ° Plato (59 g maltose, 19 g maltotriose, 16 g glucose, and 4.6 g fructose per litre) and free amino nitrogen (FAN) content of 269 mg L−1. Yeast was inoculated at a rate of 4 g fresh yeast per litre of wort (corresponding to 16 × 106 viable cells mL−1). The wort was oxygenated to 18 mg L−1 prior to pitching. The fermentations were carried out at 12 °C for 11 days, or until no change in residual extract was observed for 24 h. Wort samples were drawn regularly from the fermentation vessels with a syringe, and placed directly on ice, after which the yeast was separated from the fermenting wort by centrifugation (9,000×g, 10 min, 1 °C).
Flocculation of the yeast strains was evaluated using a modified Helm’s assay essentially as described by D’Hautcourt and Smart . Cultures recovered from fermentation were washed twice with 0.5 M EDTA (pH 7) to break the cell aggregates and then diluted to an OD600 of 0.4. Flocculation was assayed by first washing yeast pellets with 4 mM CaCl2 solution and resuspending them in 1 ml of flocculation solution containing 4 mM CaCl2, 6.8 g/L sodium acetate, 4.05 g/L acetic acid, and 4 % (v/v) ethanol (pH 4.5). Yeast cells in control tubes were resuspended in 0.5 M EDTA (pH 7). After a sedimentation period of 10 min, samples (200 μL) were taken from just below the meniscus and dispersed in 10 mM EDTA (800 μL). The absorbance at 600 nm was measured, and percentage of flocculation was determined from the difference in absorbance between control and flocculation tubes.
Maltose and maltotriose uptake by the yeast strains was assayed by first growing them in YPM medium at 20 °C. Yeasts were usually harvested at an OD600 nm between 4 and 8 (i.e. at 2 ± 1 mg dry yeast mL−1) by centrifugation, washed with ice–cold water and then with ice–cold 0.1 M tartrate-Tris (pH 4.2) and finally resuspended in the same buffer at a concentration of 200 mg of fresh yeast mL−1. Zero-trans rates of [U-14C]-maltose and [U-14C]-maltotriose uptake at 20 °C were determined with 5 mM substrate in 0.1 M tartrate-Tris (pH 4.2) as described earlier , with reaction time of 1 min. [U-14C]-maltose (ARC 488) and [U-14C]-maltotriose (ARC 627) were from American Radiolabeled Chemicals Inc. (St. Louis, MO, USA). [U-14C]-maltotriose was repurified before use as described by Dietvorst et al. .
Wort and beer analysis
The specific gravity, alcohol level and pH of samples were determined from the centrifuged and degassed fermentation samples using an Anton Paar density meter DMA 5000 M (Anton Paar GmbH, Austria) with Alcolyzer Beer ME and pH ME modules (Anton Paar GmbH, Austria).
The yeast dry mass content of the samples (i.e. yeast in suspension) was determined by washing the yeast pellets gained from centrifugation twice with 25 mL deionized H2O and then suspending the washed yeast in a total of 6 mL deionized H2O. The suspension was then transferred to a pre-weighed porcelain crucible and was dried overnight at 105 °C and allowed to cool in a desiccator, before the change of mass was measured.
Concentrations of fermentable sugars (glucose, fructose, maltose and maltotriose) were measured by HPLC using a waters 2695 separation module and waters system interphase module liquid chromatograph coupled with a waters 2414 differential refractometer (Waters Co., Milford, MA, USA). An Aminex HPX-87H organic acid analysis column (300 × 7.8 mm, Bio-Rad) was equilibrated with 5 mM H2SO4 (Titrisol, Merck, Germany) in water at 55 °C and samples were eluted with 5 mM H2SO4 in water at a 0.3 ml/min flow rate.
Yeast-derived flavour compounds were determined by headspace gas chromatography with flame ionization detector (HS-GC-FID) analysis. 4 mL of samples was filtered (0.45 µm), incubated at 60 °C for 30 min and then 1 mL of gas phase was injected (split mode; 225 °C; split flow of 30 mL min−1) into a gas chromatograph equipped with a FID detector and headspace autosampler (Agilent 7890 Series; Palo Alto, CA, USA). Analytes were separated on a HP-5 capillary column (50 m × 320 µm × 1.05 µm column, Agilent, USA). The carrier gas was helium (constant flow of 1.4 mL min−1). The temperature program used 50 °C for 3 min, 10 °C min−1 to 100 °C, 5 °C min–1 to 140 °C, 15 °C min−1 to 260 °C and then isothermal for 1 min. Compounds were identified by comparison with authentic standards and were quantified using standard curves. 1-Butanol was used as internal standard.
Results and discussion
Generation of interspecific hybrids
Auxotrophic mutants of the parental strains were successfully generated and the mutant strains, A81062 ura- and C12902 lys-, produced ascospores on the solid sporulation medium. However, quite low sporulation efficiencies were observed for the A81062 ura- strain compared to the C12902 lys- strain (11 and 78 %, respectively). These ascospores did contain viable spores though (12 and 71 %, respectively) and were used to generate the interspecific hybrids. After mating and spreading on selection plates, the first colonies started to emerge after 3 days. After a week, a total of 38 colonies (corresponding to a hybridization frequency of 2.6 × 10−6) were obtained.
Confirmation of hybrid status
Fermentation characteristics of hybrid strains
Sugars (g/L) in the original wort and beers fermented with the hybrid and parent strains
The flocculation ability and maltose and maltotriose uptake at 20 °C by the hybrid and parent strains
Flocculation ability (%)
Maltose uptake µmol min−1 g−1 DY (5 mM maltose)
Maltotriose uptake µmol min−1 g−1 DY (5 mM maltotriose)
The flocculation assay revealed strong flocculation for both the S. cerevisiae A81062 parent strain and all four hybrid strains H1–H4, while S. eubayanus C12902 displayed poor flocculation (Table 2). These properties were also evident during fermentation, as more suspended biomass was observed in the fermentations with S. eubayanus than with the hybrids (Fig. 3c). The flocculation ability of yeast is defined mainly by which FLO genes are functional in various strains , and here the hybrid strains have clearly inherited flocculation ability from the S. cerevisiae parent. Surprisingly, the flocculation of the hybrid strains was stronger than both the parent strains, thus again revealing phenotype amplification (Table 2). Flocculation of yeast towards the end of fermentation allows for a cheap and effective way of removing yeast from the beer, and the use of strongly flocculating yeast strains is especially popular among smaller breweries.
In conclusion, the use of mass mating to generate de novo lager yeast hybrids through interspecific hybridization between a S. cerevisiae ale strain and S. eubayanus was successful. The resulting hybrid strains not only inherited beneficial properties from both parent strains (cryotolerance, maltotriose utilization and strong flocculation), but also showed apparent hybrid vigour compared to the parent strains by fermenting faster and achieving a more complete utilization of fermentable sugars. It must be mentioned that here, the performance of the hybrid strains was compared relative to the original parental strains and not the actual haploid spore product that mated to form the triploid hybrids. The possible heterozygosity of the parent strains suggests that spore products may be quite different genetically from any other spore product and thus also have quite different fermentation behaviour than either the parent or other sister spores [2, 41]. How natural lager yeast hybrids were first created is still not known. The clearly improved fermentation performance of the hybrid strains shown here would support the hypothesis that S. eubayanus may have initially been present as a contaminant in S. cerevisiae ale fermentations. At lower temperatures the hybrid state, which confers phenotypic benefits from both parents, would have been selected for and hybrids would have quickly dominated the brewing process [14, 42]. The genomes of newly created yeast hybrids are also known to be unstable, and this may allow for evolutionary adaptation of hybrids to different environments . These results suggest that interspecific hybridization is suitable for production of novel non-GM lager yeast strains with unique properties (e.g. flavour production or elevated stress tolerance) and generation of novel beer styles. Further investigation of the properties of de novo hybrids is required, especially in regard to the proportionality of DNA inheritance, the origin of mitochondrial DNA and aroma production and may help to elucidate the evolutionary history of industrial lager yeast strains. As a final remark, we want to mention the recent work of Marit Hebly and co-workers from Delft University of Technology entitled “Saccharomyces cerevisiae x Saccharomyces eubayanus interspecific hybrid, the best of both worlds and beyond” that further reinforces our observations and ideally complements our study. This work will be published shortly in FEMS Yeast Research.
We thank Annika Wilhelmson for her support throughout, Eero Mattila and Arvi Wilpola for wort preparation and other assistance in the VTT Pilot Brewery, and Aila Siltala and Sirpa Jylhä for skilled technical assistance. This work was supported by the Alfred Kordelin Foundation, PBL Brewing Laboratory, the Academy of Finland (Academy Project 276480), and the FP7 Marie-Curie ITN YEASTCELL.
- 5.Bolat I, Romagnoli G, Zhu F, Pronk J, Daran J (2013) Functional analysis and transcriptional regulation of two orthologs of ARO10, encoding broad-substrate-specificity 2-oxo-acid decarboxylases, in the brewing yeast Saccharomyces pastorianus CBS1483. FEMS Yeast Res 13:505–517CrossRefPubMedGoogle Scholar
- 9.D’Hautcourt O, Smart K (1999) Measurement of brewing yeast flocculation. J Am Soc Brew Chem 57:123–128Google Scholar
- 17.Henderson C, Lozada-Contreras M, Jiranek V, Longo M, Block D (2013) Ethanol production and maximum cell growth are highly correlated with membrane lipid composition during fermentation as determined by lipidomics analysis of 22 Saccharomyces cerevisiae strains. Appl Environ Microbiol 79:91–104CrossRefPubMedCentralPubMedGoogle Scholar
- 34.Powell C, Casalis F, Fischborn T (2012) Stress tolerance in group 1 and group 2 lager brewing yeasts. In: Proceedings of the World Brewing Congress 2012, Portland, OR, USA July 28–August 1, 2012Google Scholar
- 44.Verstrepen K, Van Laere S, Vanderhaegen B, Derdelinckx G, Dufour J, Pretorius I, Winderickx J, Thevelein J, Delvaux FR (2003) Expression levels of the yeast alcohol acetyltransferase genes ATF1, Lg-ATF1, and ATF2 control the formation of a broad range of volatile esters. Appl Environ Microbiol 69:5228–5237CrossRefPubMedCentralPubMedGoogle Scholar
- 51.Zheng X, D’Amore T, Russell I, Stewart G (1994) Factors influencing maltotriose utilization during brewery wort fermentations. J Am Soc Brew Chem 52:41–47Google Scholar
Open AccessThis article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.