Advertisement

Clean Technologies and Environmental Policy

, Volume 21, Issue 9, pp 1871–1871 | Cite as

Correction to: Integrating MCDM and GIS for renewable energy spatial models: assessing the individual and combined potential for wind, solar and biomass energy in Southern Spain

  • Pilar Díaz-CuevasEmail author
  • Javier Domínguez-Bravo
  • Antonio Prieto-Campos
Correction
  • 155 Downloads

Correction to: Clean Technologies and Environmental Policy  https://doi.org/10.1007/s10098-019-01754-5

In the original article by Díaz et al. (2019), the authors have become aware of an error in the application of Equation 4, aimed at checking the validity of the method.

As it appears in the article,
$$ {\text{Cr}} = \frac{\hbox{Ci}}{\hbox{Ri}} = \frac{0.076}{0.9} = 0.08\quad {\text{Ci}} = \frac{{\left( {4.022 - 4} \right)}}{{\left( {4 - 1} \right)}} = 0.0076 $$
When redoing the calculations, the result is:
$$ {\text{Cr}} = \frac{\hbox{Ci}}{\hbox{Ri}} = \frac{0.0073}{0.9} = 0.008\quad {\text{Ci}} = \frac{{\left( {4.022 - 4} \right)}}{{\left( {4 - 1} \right)}} = 0.0073 $$

According to this, for the method to be valid, the value of Cr must be less than 0.10. In fact, the value of Cr is 0.008, less than 0.10. Therefore, this change does not affect the results and conclusions obtained.

Notes

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • Pilar Díaz-Cuevas
    • 1
    Email author
  • Javier Domínguez-Bravo
    • 2
  • Antonio Prieto-Campos
    • 1
  1. 1.Department of Physical Geography and Regional Geographical AnalysisUniversity of SevilleSevilleSpain
  2. 2.Centro de Investigaciones Energéticas, Medioambientales y TecnológicasMadridSpain

Personalised recommendations