Advertisement

Journal of Wood Science

, Volume 64, Issue 6, pp 794–801 | Cite as

Ionic liquids as formaldehyde-free wood adhesives

  • Nagisa Nakaya
  • Takashi Hosoya
  • Hisashi Miyafuji
Original Article
  • 63 Downloads

Abstract

Several ionic liquids promote depolymerization of wood components, i.e., polysaccharides and lignin, into low molecular weight compounds, some of which further re-polymerize into resin-like compounds. In this study, the depolymerization/re-polymerization of wood components in ionic liquids was applied to preparation of plywoods from Japanese cedar (Cryptomeria japonica) veneers by employing ionic liquids as adhesives. The adhesive solution was prepared by mixing an ionic liquid (pyridine hydrochloride ([Py][Cl]), imidazole hydrochloride ([IM][Cl]), or 1-ethylpyridinium chloride ([EtPy][Cl])) with water and d-glucose in various weight ratios. Tensile shear test of the three-ply plywoods prepared from the veneers and the adhesive solution through hot-pressing indicated that the plywood bonded with the [IM][Cl]-based solution ([IM][Cl]/water/glucose ratio: 9/3/2) exhibited the highest strength. Scanning electron microscope observation on the plywoods suggested that the ionic liquids softened the cell walls of the probably plywood through the depolymerization/re-polymerization reactions and the cell walls were compressed during the hot-pressing process. Entwining of the compressed cell walls and van der Waals force enhanced by the compression were considered to be origins of the adhesion of the veneers.

Keywords

Ionic liquid Adhesive Wood Bond strength Tensile shear tests 

References

  1. 1.
    Seddon KR (1997) Ionic liquids for clean technology. J Chem Technol 68:351–356Google Scholar
  2. 2.
    Ohno E, Miyafuji H (2013) Reaction behavior of cellulose dissolution in 1-ethyl-3-methylimidazolium chloride. J Wood Sci 59:221–228CrossRefGoogle Scholar
  3. 3.
    Miyata A, Miyafuji H (2014) Reaction behavior of cellulose in various pyridinium-based ionic liquids. J Wood Sci 60:438–445CrossRefGoogle Scholar
  4. 4.
    Umemura K, Sugihara O, Kawai S (2013) Investigation of a new natural adhesive composed of citric acid and sucrose for particleboard. J Wood Sci 59:203–208CrossRefGoogle Scholar
  5. 5.
    Swatloski RP, Spear SK, Holbrey JD, Rogers RD (2002) Dissolution of cellulose with ionic liquids. J Am Chem Soc 124:4974–4975CrossRefPubMedGoogle Scholar
  6. 6.
    Miyafuji H, Miyata K, Saka S, Ueda F, Mori M (2009) Reaction behavior of wood in an ionic liquid, 1-ethyl-3-methylimidazolium chloride. J Wood Sci 55:215–219CrossRefGoogle Scholar
  7. 7.
    Nakamura A, Miyafuji H, Saka S (2010) Influence of reaction atmosphere on the liquefaction and depolymerization of wood. J Wood Sci 56:256–261CrossRefGoogle Scholar
  8. 8.
    Kilpeläìnen I, Xie H, King A, Granstrom M, Heìkkìnen S, Argyropoulos DS (2007) Dissolution of wood in ionic liquids. J Agric Food Chem 55:9142–9148CrossRefPubMedGoogle Scholar
  9. 9.
    Mcbain JW, Hopkins DG (1925) On adhesives and adhesive action. J Phys Chem 29:188–204CrossRefGoogle Scholar

Copyright information

© The Japan Wood Research Society 2018

Authors and Affiliations

  • Nagisa Nakaya
    • 1
  • Takashi Hosoya
    • 1
  • Hisashi Miyafuji
    • 1
  1. 1.Graduate School of life and Environmental SciencesKyoto prefectural UniversityKyotoJapan

Personalised recommendations