Advertisement

Journal of Wood Science

, Volume 64, Issue 6, pp 861–871 | Cite as

Evaluation of ultrasonic-assisted dyeing properties of fast-growing poplar wood treated by reactive dye based on grey system theory analysis

  • Xiaoqian Wang
  • Zhiming Yu
  • Yang Zhang
  • Chusheng Qi
  • Wen-lung Chang
Original Article
  • 28 Downloads

Abstract

Ultrasonic-assisted dyeing as a novel and eco-friendly method was utilized to improve decorative value of fast-growing tree species. The effects of ultrasonic-assisted dyeing parameters (e.g., temperature, dye concentration, ultrasonic power, dipping time, dyeing assistant and dye-fixing agent) on the properties of wood were investigated, and the parameters were optimized. Moreover, the main factors mentioned above were determined with grey system theory analysis. Analyses of chemical structure, thermostability, crystallinity, and microscopic morphologies were conducted using fourier transform infrared spectroscopy (FTIR), thermogravimetric (TG), X-ray diffraction (XRD), and scanning electron microscope (SEM), respectively. Results showed that dye uptake and K/S were influenced by the parameters in the following order: dye concentration > dye-fixing agent > dyeing assistant > dipping time > ultrasonic power > temperature. FTIR indicated that an ether bond was formed between the wood component and the reactive dye. TG and XRD demonstrated that the thermal stability and crystallinity of ultrasonic-assisted dyed wood were both improved. SEM revealed that dye molecules diffused into the cell cavity, wood vessel, aperture, and part of the wood microstructure such as pit membrane, which was mechanically damaged after the ultrasonic-assisted dyeing treatment and created new fluid channels for the dye.

Keywords

Ultrasonic-assisted dyeing Reactive dye Grey system theory analysis Dye uptake K/S 

Notes

Acknowledgements

This work was supported by Fundamental Research Funds for the Central Universities (no. 2016ZCQ01).

Compliance with ethical standards

Conflict of interest

The authors declare that there is no conflict of interest regarding the publication of this paper.

References

  1. 1.
    Ayrilmis N, Kaymakci A (2013) Fast growing biomass as reinforcing filler in thermoplastic composites: Paulownia elongate wood. Ind Crop Prod 43:457–464CrossRefGoogle Scholar
  2. 2.
    Dong Y, Yan Y, Wang K, Li J, Zhang S, Xia C, Shi SQ, Cai L (2016) Improvement of water resistance, dimensional stability, and mechanical properties of poplar wood by rosin impregnation. Eur J Wood Prod 74:177–184CrossRefGoogle Scholar
  3. 3.
    Liu Y, Hu JH, Gao JM, Guo HW, Chen Y, Cheng QZ, Brian KV (2015) Wood veneer dyeing enhancement by ultrasonic-assisted treatment. Bioresources 10:1198–1212Google Scholar
  4. 4.
    Hu JH, Li Y, Liu Y, Guo HW, Li L (2016) Evaluation of the dyeing properties of basswood veneer treated by dichlorotriazine reactive dye based on gray correlation analysis. Bioresources 11:66–481Google Scholar
  5. 5.
    Arai K, Nakajima K (2011) Ribbon-like variegation of Pinus radiata using the adsorption on basic dyes in the capillary penetration process IV. Dyeing wood in parallel colored strips through the process of capillary penetration (in Japanese). Mokuzai Gakkaishi 57:34–41CrossRefGoogle Scholar
  6. 6.
    Sun D, Yu X (2011) Ultrasonic-assisted dyeing of poplar veneer. Wood Fiber Sci 43:442–448Google Scholar
  7. 7.
    Zhao Y, Tan X, Yuan Y, Yu Z, Tang J (2014) Dyeing of acetylated wood with disperse dye. Wood Fiber Sci 46:1–11Google Scholar
  8. 8.
    Parvinzadeh M, Memari N, Shaver M, Katozian B, Ahmadi S, Ziadi I (2010) Influence of ultrasonic waves on the processing of cotton with cationic softener. J Surfactants Deterg 13:135–141CrossRefGoogle Scholar
  9. 9.
    Zhuang QC (2014) Engineered wood-reconstituted decorative lumber. China Forestry Publishing House, BeijingGoogle Scholar
  10. 10.
    Rowell RM (2012) Handbook of wood chemistry and wood composites, 2nd edn. CRC Press, Boca RatonCrossRefGoogle Scholar
  11. 11.
    Shao J, Liua J, Carr CM (2001) Investigation into the synergistic effect between uv/ozone exposure and peroxide pad-batch bleaching on the printability of wool. Color Technol 117:270–275CrossRefGoogle Scholar
  12. 12.
    Gogate PR (2008) Cavitational reactors for process intensification of chemical processing applications: a critical review. Chem Eng Process 47:515–527CrossRefGoogle Scholar
  13. 13.
    Atav R, Yurdakul A (2016) Ultrasonic assisted dyeing of angora fi̇bre. Fibres Text East Eur 5:137–142CrossRefGoogle Scholar
  14. 14.
    Kamel MM, El-Shishtawy RM, Yussef BM (2005) Ultrasonic assisted dyeing III. Dyeing of wool with lac as a natural dye. Dyes Pigments 65:103–110CrossRefGoogle Scholar
  15. 15.
    Suslick KS, Hammerton DA, Cline RE (1986) Sonochemical hot spot. J Am Chem Soc 108:5641–5642CrossRefGoogle Scholar
  16. 16.
    Keun WL, Jae PK (2001) Effect of ultrasound on disperse dye particle size. Text Res J 71:395–398CrossRefGoogle Scholar
  17. 17.
    Abou-Okeil A, El-Shafie A, El Zawahry MM (2010) Ecofriendly laccase hydrogen peroxide/ultrasound-assisted bleaching of linen fabrics and its influence on dyeing efficiency. Ultrason Sonochem 17:383–390CrossRefPubMedGoogle Scholar
  18. 18.
    Guesmi A, Ladhari N, Sakli F (2013) Ultrasonic preparation of cationic cotton and its application in ultrasonic natural dyeing. Ultrason Sonochem 20:571–579CrossRefPubMedGoogle Scholar
  19. 19.
    Vouters M, Rumeau P, Tierce P, Costes S (2004) Ultrasounds: an industrial solution to optimise costs, environmental requests and quality for textile finishing. Ultrason Sonochem 11:33–38CrossRefPubMedGoogle Scholar
  20. 20.
    Ma J, Chen S, Liu C, Xu W, Wang S (2008) The influences of ultrasonic on embedding nanoparticles into porous fabric materials. Appl Acoust 9:763–769CrossRefGoogle Scholar
  21. 21.
    Tanaka T, Avramidis S, Shida S (2010) A preliminary study on ultrasonic treatments effect on transverse wood permeability. Maderas-Cienc Tecnol 12:3–9CrossRefGoogle Scholar
  22. 22.
    He Z, Yang F, Peng Y, Yi S (2013) Ultrasonic-assisted vacuum drying of wood: Effect on drying time and product quality. Bioresources 8:855–863Google Scholar
  23. 23.
    He Z, Zhao Z, Yang F, Yi S (2014) Effect of ultrasound pretreatment on wood prior to vacuum drying. Maderas-Cienc Tecnol 16:395–402Google Scholar
  24. 24.
    Li Y, Liu Y, Chen W, Wang Q, Liu Y, Yu H (2015) Facile extraction of cellulose nanocrystals from wood using ethanol and peroxide solvothermal pretreatment followed by ultrasonic nanofibrillation. Green Chem 18:1010–1018CrossRefGoogle Scholar
  25. 25.
    Wang X, Wang F, Yu Z, Zhang Y, Qi C, Du L (2017) Surface free energy and dynamic wettability of wood simultaneously treated with acidic dye and flame retardant. J Wood Sci 63:271–280CrossRefGoogle Scholar
  26. 26.
    Shen JG, Li Y, He J (2016) On the Kubelka-Munk absorption coefficient. Dyes Pigments 127:187–188CrossRefGoogle Scholar
  27. 27.
    Sun J, Liu YP, Yu YX, Fang WJ (2012) Research on the effect of dyeing process on the dye-uptake of eucalyptus. Pract For Technol 12:76–77Google Scholar
  28. 28.
    Lorimer JP, Mason TJ, Plattes M, Phull SS (2000) Dye effluent decolourisation using ultrasonically assisted electro-oxidation. Ultrason Sonochem 7:237–242CrossRefPubMedGoogle Scholar
  29. 29.
    Kamel MM, El-Shishtawy RM, Hanna HL, Ahmed NSE (2003) Ultrasonic-assisted dyeing: I. Nylon dyeability with reactive dyes. Polym Int 52:373–380CrossRefGoogle Scholar
  30. 30.
    Merdan N, Akalin M, Kocak D, Usta I (2004) Effects of ultrasonic energy on dyeing of polyamide (microfibre)/Lycra blends. Ultrasonics 42:165–168CrossRefPubMedGoogle Scholar
  31. 31.
    Kamel MM, El-Shishtawy RM, Youssef BM, Mashaly H (2007) Ultrasonic assisted dyeing. IV. Dyeing of cationised cotton with lac natural dye. Dyes Pigments 73:279–284CrossRefGoogle Scholar
  32. 32.
    Yu ZM, Zhao L, Li WJ (2002) Study on permeable mechanism with dyes during wood dyeing. J Beijing For Univ 24:79–82Google Scholar
  33. 33.
    Wu XF, Yu ZM, Zhang Y (2014) Dyeing property of xylem utilizing the axil direction of freshly-felled Populus cathayana. J Beijing For Univ 36:125–129Google Scholar
  34. 34.
    Kamel MM, El-Shishtawy RM, Youssef BM, Mashaly H (2005) Ultrasonic assisted dyeing III. Dyeing of wool with lac as a natural dye. Dyes Pigments 65:103–110CrossRefGoogle Scholar
  35. 35.
    Hu J, Fan W, Luo B, Guo H, Li L (2016) Assessment of the dyeing properties of maple veneer treated by dichlorotriazine reactive dye based on fuzzy comprehensive evaluation. Wood Res 61:719–732Google Scholar
  36. 36.
    Yan Y, Dong Y, Li C, Chen H, Zhang S, Li J (2015) Optimization of reaction parameters and characterization of glyoxal-treated poplar sapwood. Wood Sci Technol 49:241–256CrossRefGoogle Scholar
  37. 37.
    Chu D, Mu J, Zhang L, Li Y (2016) Promotion effect of NP fire retardant pretreatment on heat-treated poplar wood. Part 2: hygroscopicity, leaching resistance, and thermal stability. Holzforschung 71:1–9Google Scholar
  38. 38.
    Sugiyama J, Persson J, Chanzy H (1991) Combined infrared and electron diffraction study of the polymorphism of native cellulose. Macromolecules 24:2461–2466CrossRefGoogle Scholar
  39. 39.
    Popescu MC, Froidevaux J, Navi P, Popescu CM (2013) Structural modifications of Tilia cordata wood during heat treatment investigated by FT-IR and 2D IR correlation spectroscopy. J Mol Struct 1033:176–186CrossRefGoogle Scholar
  40. 40.
    Xiao Z, Xie Y, Adamopoulos S, Mai C (2012) Effect of chemical modification with glutaraldehyde on the weathering performance of Scots pine sapwood. Wood Sci Technol 46:749–767CrossRefGoogle Scholar
  41. 41.
    Wang X, Zhang Y, Yu Z, Qi C (2016) Properties of fast-growing poplar wood simultaneously treated with dye and flame retardant. Eur J Wood Prod 75:325–333CrossRefGoogle Scholar
  42. 42.
    Dong Y, Yan Y, Zhang S, Li J (2014) Wood/polymer nanocomposites prepared by impregnation with furfuryl alcohol and nano-SiO2. Bioresources 9:6028–6040Google Scholar
  43. 43.
    Qiu S, Wang Z, He Z, Yi S (2016) The effect of ultrasound pretreatment on poplar wood dimensional stability. Bioresources 11:7811–7821CrossRefGoogle Scholar

Copyright information

© The Japan Wood Research Society 2018

Authors and Affiliations

  1. 1.MOE Key Laboratory of Wooden Material Science and ApplicationBeijing Forestry UniversityBeijingChina
  2. 2.Chemistry DepartmentUniversity of IdahoMoscowUSA

Personalised recommendations