Advertisement

Journal of Wood Science

, Volume 64, Issue 4, pp 356–363 | Cite as

Development and investigation of a hybrid built-up column made of small diameter logs originating from juvenile trees

  • Guofang Wu
  • Enchun Zhu
  • Yong Zhong
  • Yingchun Gong
  • Haiqing RenEmail author
Original Article
  • 100 Downloads

Abstract

Small diameter logs from juvenile trees are heavily produced during the management of artificial forests around the world. As a kind of plentiful and inexpensive natural resource, the potential was not fully explored. So far the small diameter logs are mainly used as raw materials for products other than building materials. To utilize these small diameter logs originating from juvenile trees as structural members into wood construction, a kind of hybrid built-up column was developed and the performance was investigated experimentally and theoretically. It was found that column had good load-carrying capacity. To apply the developed member in wood construction, the prediction method of the column was proposed. The effective slenderness ratio which took the shear deformations due to the bending of limbs and slip of nail connections between U-shaped nails and limbs into consideration was derived based on mechanics theory. The proposed prediction method was found to have good accuracy in predicting the load-carrying capacity of the hybrid built-up column. This paper can promote the structural application of the small diameter logs originating from juvenile trees.

Keywords

Load-carrying capacity Juvenile round timber Built-up column Effective slenderness ratio Timber structure 

Notes

Acknowledgements

The authors are grateful for the financial support from Chinese Academy of Forestry Fundamental Research Fund (CAFYBB2017SY036).

References

  1. 1.
    Wang X, Ross RJ, Punches J, Barbour RJ, Forsman JW., Erickson JR (2003) Evaluation of small-diameter timber for valued-added manufacturing-a stress wave approach. In: Proceedings second international precision forestry symposium, 2003 June 15–17, Seattle WA. pp 91–96Google Scholar
  2. 2.
    Levangreen SL, Livingston J (2001) Exploring the uses for small-diameter trees. For Prod J 51(9):10–21Google Scholar
  3. 3.
    Boren H, Barnard G (2000) Analysis of the strength and stiffness properties for small diameter round Scots pine timber tested in bending and compression parallel to the grain. Paperi Ja Puu-Paper Timber 82(1):48–56Google Scholar
  4. 4.
    Bao FC, Jiang ZH, Jiang XM, Lu XX, Luo XQ (1998) Comparative studies on wood properties of juvenile vs. mature wood and plantation vs. natural forest of main plantation tree species in China. Sci Silvae Sinicae 34(2):63–76Google Scholar
  5. 5.
    Olarescu CM, Campean M, Olarescu A (2014) Dimensional stabilization of wood originating from small-diameter trees through heat treatment. Bioresources 9(3):4844–4861CrossRefGoogle Scholar
  6. 6.
    Wolfe R, Moseley C (2000) Small-diameter log evaluation for value-added structural applications. For Prod J 50(10):48–58Google Scholar
  7. 7.
    Wolfe R (2000) Research challenges for structural use of small-diameter round timbers. For Prod J 50(2):21–29Google Scholar
  8. 8.
    Wang X, Ross RJ, Mattson JA, Erickson JR, Forsman JW, Geske EA, Wehr MA (2002) Nondestructive evaluation techniques for assessing modulus of elasticity and stiffness of small-diameter logs. For Prod J 52(2):79–85Google Scholar
  9. 9.
    Cumbo DW, Smith RL, Cwiii B (2004) Value analysis of lumber produced from small-diameter timber. For Prod J 54(10):29–34Google Scholar
  10. 10.
    Wolfe R, Murphy J (2005) Strength of small-diameter round and tapered bending members. For Prod J 55(3):50–55Google Scholar
  11. 11.
    Stern EG (2001) Construction with small-diameter roundwood. Anal Biochem 2(3):216–220Google Scholar
  12. 12.
    Fredriksson M, Bomark P, Broman O, Gronlund A (2015) Using small diameter logs for cross-laminated timber production. Bioresources 10(1):1477–1486CrossRefGoogle Scholar
  13. 13.
    Komariah RN, Hadi YS, Massijaya MY, Suryana J (2015) Physical–mechanical properties of glued laminated timber made from tropical small-diameter logs grown in Indonesia. J Korean Wood Sci Technol 43(2):156–167CrossRefGoogle Scholar
  14. 14.
    Chrisp TM, Cairns J, Gulland C (2003) The development of roundwood timber pole structures for use on rural community technology projects. Constr Build Mater 17(4):269–279CrossRefGoogle Scholar
  15. 15.
    Wu GF, Zhu EC, Zhou HJ, Pan JL (2015) Testing and modelling of shearwalls studded with small-diameter round timber under cyclic lateral load. Constr Build Mater 77(77):288–296CrossRefGoogle Scholar
  16. 16.
    Xiao Y, Anderson JC (2007) Design of steel structures. Higher Education Press, BeijingGoogle Scholar
  17. 17.
    ANSI/AWC NDS-2015 (2015) National design specification for wood construction. American Wood Council, Washington, DCGoogle Scholar
  18. 18.
    EN 1995-1-1 (2004) Eurocode 5: design of timber structures-part 1–1: general-common rules and rules for buildings. European Committee for Standardization, BrusselsGoogle Scholar
  19. 19.
    ASTM D 4761 (2011) Standard test methods for mechanical properties of lumber and wood-base structural material. ASTM International, West Conshohocken, PennsylvaniaGoogle Scholar
  20. 20.
    Barrett JD, Jones ED, Lau W (1994) Canadian lumber properties. Canadian Wood Council, OttawaGoogle Scholar
  21. 21.
    GB 50005-2003 (2005) Code for design of timber structures. China Architecture and Building Press, BeijingGoogle Scholar

Copyright information

© The Japan Wood Research Society 2018

Authors and Affiliations

  • Guofang Wu
    • 1
  • Enchun Zhu
    • 2
  • Yong Zhong
    • 1
  • Yingchun Gong
    • 1
  • Haiqing Ren
    • 1
    Email author
  1. 1.Research Institute of Wood Industry, Research Institute of Forestry New TechnologyChinese Academy of ForestryBeijingPeople’s Republic of China
  2. 2.School of Civil EngineeringHarbin Institute of TechnologyHarbinPeople’s Republic of China

Personalised recommendations