Fractography of shear failure surface of softwood decayed by brown-rot fungus
Abstract
In order to investigate shear failure surface of decayed wood, wood pieces of ezomatsu (Picea jezoensis) were exposed to brown-rot fungus (Fomitopsis palustris), and standard shear test in radial plane was conducted. The failure surfaces were examined by scanning electron microscopy and surface roughness measurements were also conducted. Transwall failure that the crack elongated parallel to the tracheid axis was observed in the earlywood region through all phases of decay. Intrawall failure principally occurred in the latewood region on the early phase of decay. When decay progressed considerably, transwall failure that the crack elongated perpendicularly to the tracheid axis occurred. And transwall failure was also dominant failure morphology in the latewood region. Fragments of tracheids which were partly peeled out from S2 layers were observed in some specimens. Size and appearance frequency of fragments of tracheid were smaller and lower when decay progressed. Arithmetic average roughness, which was the index of fragment size and appearance frequency, had positive correlation to shear strength ratio. Especially, line surface roughness of radial direction, which was measured across the radial files of tracheid, had the highest correlation to the shear strength ratio. The surface roughness would be a good indicator to evaluate the decay degree.
Keywords
Scanning electron microscopy Failure morphology Average roughness Shear strengthNotes
Acknowledgments
The authors gratefully acknowledge support in the laser microscopic measurement by Prof. Yasumitsu Uraki and Ms. Yuka Tasaki, and SEM photographing by Dr. Masanori Yasui.
References
- 1.Richards DB (1954) Physical changes in decaying wood. J Forest 52:260–265Google Scholar
- 2.Takahashi M, Nishimoto K (1967) Studies on the mechanism of wood decay (I): changes in strengths of BUNA and SUGI wood as decay proceeds (in Japanese). Wood Res 41:75–89Google Scholar
- 3.Kleman-Leyer K, Agosin E, Conner AH, Kirk TK (1992) Changes in molecular size distribution of cellulose during attack by white rot and brown rot fungi. Appl Environ Microbiol 58:1266–1270PubMedCentralPubMedGoogle Scholar
- 4.Munir E, Yoon JJ, Tokimatsu T, Hattori T, Shimada M (2001) A physiological role for oxalic acid biosynthesis in the wood-rotting basidiomycete Fomitopsis palustris. Proc Natl Acad Sci USA 98:11126–11130PubMedCentralPubMedCrossRefGoogle Scholar
- 5.Thaler N, Lesar B, Humar M (2012) Correlation between brown rot decay and Pilodyn measurements. Eur J Wood Prod 70:893–895CrossRefGoogle Scholar
- 6.Toda M, Mori M, Ohashi Y, Hirai T (2010) Effect of wood decay on the shear performance of nailed timber joint (in Japanese). Mokuzai Gakkaishi 56:41–47CrossRefGoogle Scholar
- 7.Imamura Y (1990) Detection of decay and termite attack in wood using AE monitoring (in Japanese). Wood Res Tech Notes 26:38–60Google Scholar
- 8.Raczkowski J, Lutomski K, Moliński W, Woś R (1999) Detection of early stages of wood decay by acoustic emission technique. Wood Sci Technol 33:353–358CrossRefGoogle Scholar
- 9.Green B, Jones PD, Nicholas DD, Schimleck LR, Shumulsky R (2011) Non-destructive assessment of Pinus spp. wafers subjected to Gloeophyllum trabeum in soil block decay tests by diffuse reflectance near infrared spectroscopy. Wood Sci Technol 45:583–595CrossRefGoogle Scholar
- 10.Takahashi M, Nishimoto K (1967) Studies on the mechanism of wood decay (2): changes in infrared spectra of BUNA and SUGI wood as decay proceeds. Wood Res 42:1–12Google Scholar
- 11.Macchioni N, Palanti S, Rozenberg P (2007) Measurements of fungal wood decay on Scots pine and beech by means of X-ray microdensitometry. Wood Sci Technol 41:417–426CrossRefGoogle Scholar
- 12.Saiki H, Furukawa I, Harada H (1972) An observation on tensile fracture of wood by scanning electron microscope (in Japanese). Bull Kyoto Univ For 43:309–319Google Scholar
- 13.Côté WA, Hanna RB (1983) Ultrastructural characteristics of wood fracture surfaces. Wood Fiber Sci 15:135–163Google Scholar
- 14.Müller U, Sretenovic A, Gindl W, Grabner M, Wimmer R, Teischinger A (2004) Effects of macro- and micro-structural variability on the shear behavior of softwood. IAWA J 25:231–243CrossRefGoogle Scholar
- 15.Gindl W, Teischinger A (2003) Comparison of the TL-shear strength of normal and compression wood of European larch. Holzforschung 57:421–426CrossRefGoogle Scholar
- 16.Furukawa I (1988) Studies on safety in timbers and woody materials (I): fractographic approach to evaluating the brashness of wood (in Japanese). Res bull Tottori Univ For 17:151–169Google Scholar
- 17.JIS Z 2101 (2009) Methods of test for wood (in Japanese). Japanese Industrial Standard Association, TokyoGoogle Scholar
- 18.Okusa K (1980) Studies on the shearing of wood: especially on the elastic-plastic theory and fracture mechanics: III. On the stress singularity and the energy release rate in the chair-type (JIS) shearing specimen (in Japanese). Bull Fac Agric Kagoshima Univ 30:201–215Google Scholar
- 19.JIS B 0601 (1994) Surface roughness—Definitions and designation (in Japanese). Japanese Industrial Standard Association, TokyoGoogle Scholar