In high-level radioactive waste (HLW) repositories, buffer blocks are used for constructing engineering barrier to intercept radionuclides. Deterioration of exposed buffer blocks during their manufacture, storage, and transport may enlarge the hydraulic conductivity of an engineering barrier, reducing the barrier’s efficacy. It is not easy to monitor the shrinkage displacement by traditional tools because the shrinkage is less than 1 mm per day, while the monitoring length of the block is as large as 350 mm. Additionally, the cracks are often too narrow to allow for an accurate measurement of their depths. For this study, we used Gaomiaozi (GMZ) bentonite and quartz sand at a 7:3 mass ratio to compact fan-shape buffer blocks, and then exposed those blocks in an indoor environmental condition, which allowed desiccation of the blocks to occur. We monitored the overall and surface shrinkage of the blocks employing fixed dial indicators (FDIs) and digital image correlation (DIC), respectively. We excavated subsamples containing cracks from a desiccated block at various depths and estimated the depth of the cracks using Brazilian split tests. We also investigated the microstructure evolution of the blocks with mercury intrusion porosimetry (MIP) after exposure. Hierarchical evaporation of the block’s moisture was observed because the evaporating surface migrated inward rapidly, which led to the absence of initial evaporation stage. The shrinkage displacements of each measuring line were similar, while the longer measuring lines presented less shrinkage strain, indicating the uneven shrinkage. Moreover, the surface shrinkage of the blocks was greater than the overall shrinkage, revealing the interior of the blocks to be resistant to change during desiccation. Besides, the blocks’ inner pores showed less change, while the inter-aggregate pores on the block surface shrank visibly after exposure. The depth of the desiccated cracks was less than 26 mm, as estimated by the distribution of tensile strength. Because we found the varied deterioration levels between the block’s surface and interior, we determined that its structural integrity and efficacy were not as compromised as its surface seemed to indicate.
This is a preview of subscription content, log in to check access.
This work was supported by the National Nature Science Foundation of China (41672261) and Fundamental Research Funds for the Central Universities (lzujbky-2016-k15; lzujbky-2017-ct02); we are grateful for their financial support. And we gratefully acknowledge Mr. T.M. Luis for his language assistance.
Compliance with ethical standards
Conflict of interest
We declare that we do not have any commercial or associative interest that represents a conflict of interest in connection with the work submitted.
ASTM D4404-18 (2018) Standard test method for determination of pore volume and pore volume distribution of soil and rock by mercury intrusion porosimetry. ASTM International: West Conshohocken, PA. https://doi.org/10.1520/D4404-18
Gui YL, Zhao GF, Khalili N (2012) Experimental investigation of desiccation of clayey soils. In 22th Australasian conference on the mechanics of structure and materials (ASMSM22) Sydney: AustraliaGoogle Scholar
Peron H, Hueckel T, Laloui L, Hu L (2009b) Fundamentals of desiccation cracking of fine-grained soils: experimental characterisation and mechanisms identification. Can Geotech J 46(10):1177–1201. https://doi.org/10.1139/T09-054Google Scholar
Prat PC, Ledesma A, Lakshmikantha MR (2006) Size effect in the cracking of drying soil. In Fracture of Nano and Engineering Materials and Structures (pp. 1373–1374). Springer, Dordrecht. https://doi.org/10.1007/1-4020-4972-2_682
Wang J, Chen L, Su R, Zhao XG (2018b) The Beishan underground research laboratory for geological disposal of high-level radioactive waste in China: planning, site selection, site characterization and in situ tests. J Rock Mech Geotech Eng 10(3):411–435. https://doi.org/10.1016/j.jrmge.2018.03.002Google Scholar
Wimelius H, Pusch R (2008) Buffer protection in the installation phase. R-08-137, SKB, SwedenGoogle Scholar
Zhao NF, Ye WM, Chen YG, Chen B, Cui YJ (2017) Investigation on swelling-shrinkage behavior of unsaturated compacted GMZ bentonite on wetting-drying cycles. Bull Eng Geol Environ:1–11. https://doi.org/10.1007/s10064-017-1095-3
Zhu LP, Zhang HY, Tan Y, Yuan W, Liu P (2018) The determination of the optimal bentonite-sand ration based on fuzzy integrated evaluation. Journal of Lanzhou University (Natural Sciences) 54(3):310–316 (In Chinese)Google Scholar