Preliminary approach for prioritizing resource allocation for rock fall hazard investigations based on susceptibility mapping and efficient three-dimensional trajectory modelling
- 18 Downloads
Rock fall hazard management typically requires efficient allocation of available resources for detailed hazard assessment and control. In mountainous terrain, remoteness and difficult access pose a challenge for resource allocation decision-making. In this paper, we evaluate a systematic approach for decision-making based on topographic susceptibility and efficient three-dimensional trajectory modelling. The approach relies on the availability of detailed digital elevation models, a strategy which is now considered to be the state of practice. In this study, it is assumed that geologic and rock mass quality information, as well as rock fall occurrence records, are not available in the necessary detail across the area of study for them to be used in rock fall hazard assessments. The approach is illustrated with a case study along a section of railway within the Canadian Cordillera. The advantages and limitations of the approach are discussed, as well as some key considerations for its application.
KeywordsRock falls Hazard Resource allocation Susceptibility maps Trajectory modelling
This research was made possible by the (Canadian) Railway Ground Hazard Research Program, which is funded by the Natural Sciences and Engineering Research Council of Canada (NSERC), Canadian Pacific Railway (CP), Canadian National Railway (CN) and Transport Canada (TC). The authors would also like to acknowledge Teck Coal Limited for providing the aerial LiDAR image for this research.
- Barton NR (2008) Shear strength of rockfill, interfaces and rock joints, and their points of contact in rock dump design. In: Fourie A (ed) Rock dumps 2008: Proc First Int Seminar on the Management of Rock dumps, Stockpiles and Heap Leach Pads, 5–6 March 2008. Australian Centre for Geomechanics, Nedlands, pp 3–17Google Scholar
- Google Earth Version 7.1.7 (2016) Tornado Mountain, BC, 2010. UTM 11 5532008 N 654938 E, eye altitude 1.5 km. Image Teck Coal Limited. Accessed 22 Dec 2016Google Scholar
- Jaeger JC, Cook NGW, Zimmerman RW (2007) Fundamentals of rock mechanics, 4th edn. Blackwell, MaldenGoogle Scholar
- Macciotta R, Cruden DM, Martin CD, Morgenstern NR (2011) Combining geology, morphology and 3D modelling to understand the rock fall distribution along the railways in the Fraser River Valley, between Hope and Boston Bar. In: Eberhardt E, Stead D (eds) Slope stability 2011. Proc 2011 Int Symp on Rock Slope Stability in Open Pit Mining and Civil Engineering, 18–21 September 2011. Canadian Rock Mechanics Association, Vancouver. http://www.carma-rocks.ca/resources/slope-stability-2011
- Macciotta R, Martin CD (2013) Role of 3D topography in rock fall trajectories and model sensitivity to input parameters. In: Pyrak-Nolte LJ, Chan A, Dershowitz W, Morris J, Rostami J (eds) 47th US Rock Mechanics/Geomechanics Symposium, 23–26 June 2013. American Rock Mechanics Association (ARMA), New York, pp 150–158. http://armarocks.org
- Macciotta R, Martin CD (2015) Remote structural mapping and discrete fracture networks to calculate rock fall volumes at Tornado Mountain, British Columbia. In: 49th US Rock Mechanics/Geomechanics Symposium, 28 June–1 July 2015. American Rock Mechanics Association (ARMA), New York, pp 3056–3064. http://armarocks.org
- Russell JA (2011) Process analysis of Rockfalls with stationary terrestrial LiDAR and RockFall analyst. M.Sc. thesis. Department of Civil and Environmental Engineering, University of Alberta, EdmontonGoogle Scholar
- Wyllie DC (2015) Rock fall engineering, 1st edn. CRC Press/Taylor & Francis Group, Boca RatonGoogle Scholar