Abstract
Many studies have shown that artificial neural networks (ANNs) are useful for predicting the unconfined compressive strength (UCS) of rocks. However, ANNs do have some deficiencies: they can get trapped in local minima and they have a slow learning rate. It is widely accepted that optimization algorithms such as particle swarm optimization (PSO) can improve ANN performance. This study investigated the application of a hybrid PSO-based ANN model to the prediction of rock UCS. To prepare a dataset for the predictive model, extensive laboratory tests (i.e., 160 tests in total) were conducted on 40 soft rock sample sets (mostly shale) presenting various weathering grades that were obtained from different excavation sites in Johor, Malaysia. The laboratory tests included the UCS test and other basic rock index tests (the Brazilian tensile strength test, point load index test, and ultrasonic test). When developing the predictive model of UCS, the results of the basic rock tests as well as the bulk densities of the samples were used as input parameters, while the UCS was set as the output of the predictive model. The value account for (VAF), root mean squared error (RMSE), and adjusted R 2 (coefficient of determination) were utilized to check the performances of the predictive models. The high performance indices of the proposed model highlight the superiority of the PSO-based ANN model for UCS prediction.
Similar content being viewed by others
References
Agustawijaya DS (2007) The uniaxial compressive strength of soft rock. Civil Eng Dimen 9:9–14
Altindag R, Guney A (2010) Predicting the relationships between brittleness and mechanical properties (UCS, TS and SH) of rocks. Sci Res Essays 5:2107–2118
Alvarez GM, Babuska R (1999) Fuzzy model for the prediction of unconfined compressive strength of rock samples. Int J Rock Mech Min Sci 36:339–349
Arikan F, Ulusay R, Aydin N (2007) Characterization of weathered acidic volcanic rocks and a weathering classification based on a rating system. Bull Eng Geol Environ 66(4):415–430
Basu A, Aydin A (2006) Predicting uniaxial compressive strength by point load test: significance of cone penetration. Rock Mech Rock Eng 39:483–490
Baykasoglu A, Gullu H, Canakci H, Ozbakir L (2008) Predicting of compressive and tensile strength of limestone via genetic programming. Expert Syst Appl 35:111–123
Bieniawski ZT (1974) Estimating the strength of rock materials. J S Afr Inst Min Metall 74:312–320
Broch E, Franklin JA (1972) Point-load strength test. Int J Rock Mech Min Sci Geom 9(6):241–246
Ceryan N, Okkan U, Kesimal A (2012) Prediction of unconfined compressive strength of carbonate rocks using artificial neural networks. Environ Earth Sci 68(3):807–819
Cobanglu I, Celik S (2008) Estimation of uniaxial compressive strength from point load strength, Schmidt hardness and P-wave velocity. Bull Eng Geol Environ 67:491–498
Dehghan S, Sattari GH, Chehreh CS, Aliabadi MA (2010) Prediction of unconfined compressive strength and modulus of elasticity for travertine samples using regression and artificial neural networks. Min Sci Technol 20:0041–0046
Diamantis K, Gartzos E, Migiros G (2009) Study on uniaxial compressive strength, point load strength index, dynamic and physical properties of serpentinites from Central Greece: test results and empirical relations. Eng Geol 108:199–207
Din F, Rafiq M (1997) Correlation between compressive strength and tensile strength/index strength of some rocks of North-West Frontier Province (limestone and granite). Geol Bull 30:183–193
Dreyfus G (2005) Neural networks: methodology and application, 2nd edn. Springer, Berlin
Eberhart R, Kennedy J (1995) A new optimizer using particle swarm theory. Proc 6th Int Symp on Micro Machine and Human Science, Nagoya, Japan, 4–6 Oct 1995, pp 39–43
Entwisle DC, Hobbs RN, Jones LD, Gunn D, Raines MG (2005) The relationship between effective porosity, uniaxial compressive strength and sonic velocity of intact Borrowdale volcanic group core samples from Sellafield. Geotech Geol Eng 23:793–809
Farah R (2011) Correlations between index properties and unconfined compressive strength of weathered Ocala limestone. University of North Florida, Jacksonville, p 142
Ghaboussi JH, Garrett JH, Wu X (1991) Knowledge-based model of material behaviour with neural networks. J Eng Mech 117(1):132–153
Ghosh DK, Srivastava M (1991) Point-load strength: an index for classification of rock material. Bull Int Assoc Eng Geol 44:27–33
Gokceoglu C, Zorlu K (2004) A fuzzy model to predict the unconfined compressive strength and modulus of elasticity of a problematic rock. Eng Appl Artif Intell 17:61–72
Gupta AS, Rao KS (1998) Index properties of weathered rocks: inter-relationships and applicability. Bull Eng Geol Environ 57(2):161–172
Hajihassani M, Jahed Armaghani D, Sohaei H, Tonnizam Mohamad E, Marto A (2014) Prediction of airblast-overpressure induced by blasting using a hybrid artificial neural network and particle swarm optimization. Appl Acoust 80:57–67
Heidari M, Khanlari GR, Torabi Kaveh M, Kargarian S (2012) Predicting the uniaxial compressive and tensile strengths of gypsum rock by point load testing. Rock Mech Rock Eng 45:265–273
Jahanbakhshi R, Keshavarzi R (2011) Intelligent prediction of uniaxial compressive strength for sandstone. In: Proc 45th US Rock Mechanics/Geomechanics Symp, San Francisco, CA, USA, 26–29 June 2011, pp 181–189
Jahed Armaghani D, Hajihassani M, Mohamad ET, Marto A, Noorani SA (2013) Blasting-induced flyrock and ground vibration prediction through an expert artificial neural network based on particle swarm optimization. Arab J Geosci. doi:10.1007/s12517-013-1174-0
Kahraman S (2001) Evaluation of simple methods for assessing the uniaxial compressive strength of rock. Int J Rock Mech Min Sci 38:981–994
Kahraman S, Alber M (2006) Estimating the unconfined compressive strength and elastic modulus of a fault breccia mixture of weak rocks and strong matrix. Int J Rock Mech Min Sci 43:1277–1287
Kahraman S, Fener M, Gunaydin O (2002) Predicting the Schmidt hammer values of in situ intact rock from core samples values. Int J Rock Mech Min Sci 39(3):395–399
Kahraman S, Gunaydin O, Fener M (2005) The effect of porosity on the relation between uniaxial compressive strength and point load index. Int J Rock Mech Min Sci 42:584–589
Kahraman S, Fener M, Kozman E (2012) Predicting the compressive and tensile strength of rocks from indentation hardness index. J S Afr Ins Min Metall 112(5):331–339
Khandelwal M (2013) Correlating P-wave velocity with the physico-mechanical properties of different rocks. Pure Appl Geophys 170:507–514
Khandelwal M, Singh TN (2009) Correlating static properties of coal measures rocks with P-wave velocity. Int J Coal Geol 79:55–60
Kohno M, Maeda H (2012) Relationship between point load strength index and uniaxial compressive strength of hydrothermally altered soft rocks. Int J Rock Mech Min Sci 50:147–157
Kosko B (1994) Neural networks and fuzzy systems: a dynamical systems approach to machine intelligence. Prentice-Hall, New Delhi, pp 12–17
Lee Y, Oh SH, Kim MW (1991) The effect of initial weights on premature saturation in back-propagation learning. In: Proc IEEE Int Joint Conf on Neural Networks, Seattle, WA, USA, 18–21 Nov 1991, pp 765–770
Mendes R, Cortes P, Rocha M, Neves J (2002) Particle swarms for feed forward neural net training. In: Proc IEEE Int Joint Conf on Neural Networks, Honolulu, HI, USA, 12–17 May 2002, pp 1895–1899
Meulenkamp F (1997) Improving the prediction of the UCS by Equotip readings using statistical and neural network models. Mem Centre Eng Geol Neth 162:127
Meulenkamp F, Grima MA (1999) Application of neural networks for the prediction of the unconfined compressive strength (UCS) from Equotip hardness. Int J Rock Mech Min Sci 36(1):29–39
Minaeian B, Ahangari K (2011) Estimation of uniaxial compressive strength based on P-wave and Schmidt hammer rebound using statistical method. Arab J Geosci. doi:10.1007/s12517-011-0460-y
Mishra DA, Basu A (2012) Use of the block punch test to predict the compressive and tensile strengths of rocks. Int J Rock Mech Min Sci 51:119–127
Moradian ZA, Behnia M (2009) Predicting the uniaxial compressive strength and static Young’s modulus of intact sedimentary rocks using the ultrasonic test. Int J Geomech 9:1–14
Nazir R, Momeni E, Jahed Armaghani D (2013) Correlation between unconfined compressive strength and indirect tensile strength of limestone rock samples. Electr J Geotech Eng 18:1737–1746
Poli R, Kennedy J, Blackwell T (2007) Particle swarm optimization. Swarm Intell 1(1):33–57
Rabbani E, Sharif F, Koolivand Salooki M, Moradzadeh A (2012) Application of neural network technique for prediction of uniaxial compressive strength using reservoir formation properties. Int J Rock Mech Min Sci 56:100–111
Sarkar K, Tiwary A, Singh TN (2010) Estimation of strength parameters of rock using artificial neural networks. Bull Eng Geol Environ 69:599–606
Sharma PK, Singh TN (2008) A correlation between P-wave velocity, impact strength index, slake durability index and uniaxial compressive strength. Bull Eng Geol Environ 67:17–22
Sheorey PR (1997) Empirical rock failure criteria. AA Balkema, Rotterdam
Shi Y, Eberhart R (1998) Parameter selection in particle swarm optimization. In: Proceedings of the 7th International Conference on Evolutionary Programming VII, LNCS vol. 1447. Springer, New York, pp 591–600
Shi Y, Eberhart RC (1999) Empirical study of particle swarm optimization. In: Proceedings of the 1999 IEEE Congress on Evolutionary Computation. IEEE, New York, pp 1945–1950
Simpson PK (1990) Artificial neural system—foundation, paradigm, application and implementations. Pergamon, New York
Singh VK, Singh D, Singh TN (2001) Prediction of strength properties of some schistose rocks from petrographic properties using artificial neural networks. Int J Rock Mech Min Sci 38(2):269–284
Singh TN, Kanchan R, Saigal K, Verma AK (2004) Prediction of P-wave velocity and anisotropic properties of rock using artificial neural networks technique. J Sci Ind Res India 63:32–38
Smith HJ (1997) The point load test for weak rock in dredging applications. Int J Rock Mech Min Sci 34(3):295e1–295e13
Sonmez H, Tuncay E, Gokceoglu C (2004) Models to predict the uniaxial compressive strength and the modulus of elasticity for Ankara agglomerate. Int J Rock Mech Min Sci 41(5):717–729
Sonmez H, Gokceoglu C, Medley CEW, Tuncay E, Nefeslioglu HA (2006) Estimating the uniaxial compressive strength of a volcanic bimrock. Int J Rock Mech Min Sci 43(4):554–561
Sulukcu S, Ulusay R (2001) Evaluation of the block punch index test with particular reference to the size effect, failure mechanism and its effectiveness in predicting rock strength. Int J Rock Mech Min Sci 38:1091–1111
Tawadrous AS, Katsabanis PD (2007) Prediction of surface crown pillar stability using artificial neural networks. Int J Numeric Analyt Meth 31(7):917–931
Tsiambaos G, Sabatakakis N (2004) Considerations on strength of intact sedimentary rocks. Eng Geol 72:261–273
Tugrul A, Zarif IH (2000) Engineering aspects of limestone weathering in Istanbul, Turkey. Bull Eng Geol Environ 58(3):191–206
Ulusay R, Hudson JA (eds) (2007) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. Suggested methods prepared by the ISRM Commission on Testing Methods. International Society for Rock Mechanics, Lisbon
Victoire T, Jeyakumar AE (2004) Hybrid PSO–SQP for economic dispatch with valve-point effect. Electr Power Sys Res 71:51–59
Yagiz S, Sezer EA, Gokceoglu C (2012) Artificial neural networks and nonlinear regression techniques to assess the influence of slake durability cycles on the prediction of uniaxial compressive strength and modulus of elasticity for carbonate rocks. Int J Numer Anal Method Geomech 36(14):1636–1650
Yasar E, Erdogan Y (2004) Correlating sound velocity with the density, compressive strength and Young’s modulus of carbonate rocks. Int J Rock Mech Min Sci 5:871–875
Yilmaz I, Yuksek AG (2008) An example of artificial neural network (ANN) application for indirect estimation of rock parameters. Rock Mech Rock Eng 41(5):781–795
Acknowledgments
The authors would like to extend their gratitude to Universiti Teknologi Malaysia and the Government of Malaysia for financial aid and support through vote 01H88, and to all parties that made this study possible.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mohamad, E.T., Jahed Armaghani, D., Momeni, E. et al. Prediction of the unconfined compressive strength of soft rocks: a PSO-based ANN approach. Bull Eng Geol Environ 74, 745–757 (2015). https://doi.org/10.1007/s10064-014-0638-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10064-014-0638-0