Advertisement

Journal of Solid State Electrochemistry

, Volume 22, Issue 11, pp 3579–3587 | Cite as

Polyvinylidene fluoride/polystyrene hybrid fibers with high ionic conductivity and enhanced mechanical strength as lithium-ion battery separators

  • Haiqing Liu
  • Xiangwei Wang
  • Chunxia Kuang
  • Lei Li
  • Yunyun Zhai
Original Paper
  • 45 Downloads

Abstract

Ionic conductivity is an important separator parameter influencing the cycle life and rate capability of lithium-ion batteries (LIBs). To improve the ionic conductivity of polyvinylidene fluoride (PVdF) fibers, polystyrene (PS) was added into the PVdF electrospinning solution for the fabrication of PVdF/PS hybrid fibers. The morphology and electrochemical property were regulating by tuning the PS dosage. Owing to the increasing mass ratio of the adhesion structure, not only the porosity, uptake, and average pore size of PVdF/PS hybrid fibers simultaneously decreased but also the mechanical strength enhanced (15.9 MPa) with the increasing PS content. In addition, the ionic conductivity increased with increasing PS content (1.58 mS cm−1 for PVdF/PS hybrid fiber with 20-wt% PS) ascribing to the increase of the amorphous region. Benefiting from the characteristic of PVdF, the as-prepared PVdF/PS hybrid fibers with non-flammability can significantly improve the LIBs safety. Significantly, the cells with PVdF/PS hybrid fibers (15-wt% PS) displayed satisfactory cycling performance (159.9 mAh g−1 at 0.2 C for 45 cycles after testing at 0.1 C for 5 cycles) and rate capability, indicating that PVdF/PS hybrid fibers are the promising separator candidates for the applications in LIBs.

Keywords

PVdF/PS hybrid fibers Improved ionic conductivity Enhanced mechanical strength Lithium-ion batteries 

Notes

Funding information

This work is supported by the National Natural Science Foundation of China (Nos. 51503079 and 51103063), the Program for Science and Technology of Zhejiang Province (Nos. 2017C31071 and 2018C37075), and the Program for Science and Technology of Jiaxing (No. 2016AY13008).

Supplementary material

10008_2018_4068_MOESM1_ESM.docx (807 kb)
ESM 1 (DOCX 807 kb)

References

  1. 1.
    Jiang F, Nie Y, Yin L, Feng Y, Yu Q, Zhong C (2016) Core-shell structured nanofibrous membrane as advanced separator for lithium-ion batteries. J Membr Sci 510:1–9CrossRefGoogle Scholar
  2. 2.
    Lu J, Chen Z, Ma Z, Pan F, Curtiss LA, Amine K (2016) The role of nanotechnology in the development of battery materials for electric vehicles. Nat Nanotechnol 11(12):1031–1039CrossRefPubMedGoogle Scholar
  3. 3.
    Kim M, Kim JK, Park JH (2015) Clay nanosheets in skeletons of controlled phase inversion separators for thermally stable Li-ion batteries. Adv Funct Mater 25(22):3399–3404CrossRefGoogle Scholar
  4. 4.
    Arora P, Zhang Z (2004) Battery separators. Chem Rev 104(10):4419–4462CrossRefPubMedGoogle Scholar
  5. 5.
    Lee H, Yanilmaz M, Toprakci O, Fu K, Zhang X (2014) A review of recent developments in membrane separators for rechargeable lithium-ion batteries. Energy Environ Sci 7(12):3857–3886CrossRefGoogle Scholar
  6. 6.
    Nunes-Pereira J, Costa CM, Lanceros-Mendez S (2015) Polymer composites and blends for battery separators: state of the art, challenges and future trends. J Power Sources 281:378–398CrossRefGoogle Scholar
  7. 7.
    Jiang X, Xiao L, Ai X, Yang H, Cao Y (2017) Novel bifunctional thermo-sensitive poly(lactic acid)@poly(butylene succinate) core-shell fibrous separator prepared by coaxial electrospun route for safe lithium-ion battery. J Mater Chem A 5(44):23238–23242CrossRefGoogle Scholar
  8. 8.
    Liu X, Song K, Lu C, Huang Y, Duan X, Li S, Ding Y (2018) Electrospun PU@GO separators for advanced lithium ion batteries. J Membr Sci 555:1–6CrossRefGoogle Scholar
  9. 9.
    Wang M, Xin C, Wang H, Wu H, Jin X, Huang C (2017) Improved performances of lithium-ion batteries with a separator based on inorganic fibers. J Mater Chem A 5(1):311–318CrossRefGoogle Scholar
  10. 10.
    Zhao L, Huang Y, Liu B, Huang Y, Song A, Lin Y, Wang M, Li X, Cao H (2018) Gel polymer electrolyte based on polymethyl methacrylate matrix composited with methacrylisobutyl-polyhedral oligomeric silsesquioxane by phase inversion method. Electrochim Acta 278:1–12CrossRefGoogle Scholar
  11. 11.
    Zhang H, Liu J, Guan M, Shang Z, Sun Y, Lu Z, Li H, An X, Liu H (2018) Nano-fibrillated cellulose (NFC) as a pore size mediator in the preparation of thermal resistant separators for lithium ion batteries. ACS Sustain Chem Eng 6(4):4838–4844CrossRefGoogle Scholar
  12. 12.
    Jung JW, Lee CL, Yu S, Il-Doo K (2016) Electrospun nanofibers as a platform for advanced secondary batteries: a comprehensive review. J Mater Chem A 4(3):703–750CrossRefGoogle Scholar
  13. 13.
    Zhai Y, Wang N, Mao X, Si Y, Yu J, Al-Deyab S, El-Newehy M, Ding B (2014) Sandwich-structured PVDF/PMMA/PVDF nanofibrous separators with robust mechanical strength and thermal stability for lithium ion batteries. J Mater Chem A 2(35):14511–14518CrossRefGoogle Scholar
  14. 14.
    Deng F, Wang X, He D, Hu J, Gong C, Ye Y, Xie X, Xue Z (2015) Microporous polymer electrolyte based on PVDF/PEO star polymer blends for lithium ion batteries. J Membr Sci 491:82–89CrossRefGoogle Scholar
  15. 15.
    Zhai Y, Xiao K, Yu J, Ding B (2016) Closely packed x-poly(ethylene glycol diacrylate) coated polyetherimide/poly(vinylidene fluoride) fiber separators for lithium ion batteries with enhanced thermostability and improved electrolyte wettability. J Power Sources 325:292–300CrossRefGoogle Scholar
  16. 16.
    Zhu Z, Liu Z, Zhong L, Song C, Shi W, Cui F, Wang W (2018) Breathable and asymmetrically superwettable Janus membrane with robust oil-fouling resistance for durable membrane distillation. J Membr Sci 563:602–609CrossRefGoogle Scholar
  17. 17.
    Peng L, QiaoYing ZL, Dahu Y, Haixiang S, HouYingfei LS, Qi L (2015) Electrospun PS/PAN fibers with improved mechanical property for removal of oil from water. Mar Pollut Bull 93:75–80CrossRefGoogle Scholar
  18. 18.
    Wu J, An A, Guo J, Lee E, Farid M, Jeong S (2017) CNTs reinforced super-hydrophobic-oleophilic electrospun polystyrene oil sorbent for enhanced sorption capacity and reusability. Chem Eng J 314:526–536CrossRefGoogle Scholar
  19. 19.
    Wilson C, María J, Amparo L, Jose M (2017) Use of phase change materials to develop electrospun coatings of interest in food packaging applications. J Food Eng 192:122–128CrossRefGoogle Scholar
  20. 20.
    Ke H, Feldman E, Guzman P, Cole J, Wei Q, Chu B, Alkhudhiri A, Alrasheed R, Hsiao BS (2016) Electrospun polystyrene nanofibers for direct contact membrane distillation. J Membr Sci 515:86–97CrossRefGoogle Scholar
  21. 21.
    Sun M, Ding B, Yu J, Hsieh Y-L, Sun G (2012) Self-assembled monolayer of 3-mercaptopropionic acid on electrospun polystyrene membranes for Cu2+ detection. Sensor Actuators B Chem 161(1):322–328CrossRefGoogle Scholar
  22. 22.
    Prasanth R, Aravindan V, Srinivasan M (2012) Novel polymer electrolyte based on cob-web electrospun multi component polymer blend of polyacrylonitrile/poly(methyl methacrylate)/polystyrene for lithium ion batteries-preparation and electrochemical characterization. J Power Sources 202:299–307CrossRefGoogle Scholar
  23. 23.
    Lin D, Zhuo D, Liu Y, Cui Y (2016) All-integrated bifunctional separator for Li dendrite detection via novel solution synthesis of a thermostable polyimide separator. J Am Chem Soc 138(34):11044–11050CrossRefPubMedGoogle Scholar
  24. 24.
    Wang X, Ding B, Sun G, Wang M, Yu J (2013) Electro-spinning/netting: a strategy for the fabrication of three-dimensional polymer nano-fiber/nets. Prog Mater Sci 58(8):1173–1243CrossRefGoogle Scholar
  25. 25.
    Zhu Z, Wang W, Qi D, Luo Y, Liu Y, Xu Y, Cui F, Wang C, Chen X (2018) Calcinable polymer membrane with revivability for efficient oily-water remediation. Adv Mater 1801870Google Scholar
  26. 26.
    Kim JR, Choi SW, Jo SM, Lee WS, Kim BC (2005) Characterization and properties of P(VdF-HFP)-based fibrous polymer electrolyte membrane prepared by electrospinning. J Electrochem Soc 152(2):A295–A300CrossRefGoogle Scholar
  27. 27.
    Choi SW, Kim JR, Ahn YR, Jo SM, Cairns EJ (2007) Characterization of electrospun PVDF fiber-based polymer electrolytes. Chem Mater 19(1):104–115CrossRefGoogle Scholar
  28. 28.
    Yanilmaz M, Dirican M, Zhang X (2014) Evaluation of electrospun SiO2/nylon 6,6 nanofiber membranes as a thermally-stable separator for lithium-ion batteries. Electrochim Acta 133:501–508CrossRefGoogle Scholar
  29. 29.
    Liang Y, Cheng S, Zhao J, Zhang C, Sun S, Zhou N, Qiu Y, Zhang X (2013) Heat treatment of electrospun polyvinylidene fluoride fibrous membrane separators for rechargeable lithium-ion batteries. J Power Sources 240:204–211CrossRefGoogle Scholar
  30. 30.
    Kim Y-J, Ahn CH, Lee MB, Choi M-S (2011) Characteristics of electrospun PVDF/SiO2 composite nanofiber membranes as polymer electrolyte. Mater Chem Phys 127(1-2):137–142CrossRefGoogle Scholar
  31. 31.
    Zhai Y, Xiao K, Yu J, Yang J, Ding B (2015) Thermostable and nonflammable silica-polyetherimide-polyurethane nanofibrous separators for high power lithium ion batteries. J Mater Chem A 3(19):10551–10558CrossRefGoogle Scholar
  32. 32.
    Tobishima S, Ogino Y, Watanabe Y (2003) Influence of electrolyte additives on safety and cycle life of rechargeable lithium cells. J Appl Electrochem 33(2):143–150CrossRefGoogle Scholar
  33. 33.
    Xiao K, Zhai Y, Yu J, Ding B (2015) Nanonet-structured poly(m-phenylene isophthalamide)-polyurethane membranes with enhanced thermostability and wettability for high power lithium ion batteries. RSC Adv 5(68):55478–55485CrossRefGoogle Scholar
  34. 34.
    Zhu Z, Liu Y, Hou H, Shi W, Qu F, Cui F, Wang W (2018) Dual-bioinspired design for constructing membranes with superhydrophobicity for direct contact membrane distillation. Environ Sci Technol 52(5):3027–3036CrossRefPubMedGoogle Scholar
  35. 35.
    Suriyakumar S, Raja M, Angulakshmi N, Nahm KS, Stephan AM (2016) A flexible zirconium oxide based-ceramic membrane as a separator for lithium-ion batteries. RSC Adv 6(94):92020–92027CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.College of Biological, Chemical Sciences and EngineeringJiaxing UniversityJiaxingChina
  2. 2.School of Metallurgy and Chemical EngineeringJiangxi University of Science and TechnologyGanzhouChina

Personalised recommendations