Advertisement

Theoretical investigations on structures, stability, energetic performance, sensitivity, and mechanical properties of CL-20/TNT/HMX cocrystal explosives by molecular dynamics simulation

  • Gui-Yun HangEmail author
  • Wen-Li Yu
  • Tao Wang
  • Jin-Tao Wang
Original Paper
  • 35 Downloads

Abstract

In this article, the CL-20, TNT, HMX, CL-20/TNT, CL-20/HMX and different CL-20/TNT/HMX cocrystal models were established. Molecular dynamics method was selected to optimize the structures, predict the stability, sensitivity, energetic performance, and mechanical properties of cocrystal models. The binding energy, trigger bond length, trigger bond energy, cohesive energy density, detonation parameters, and mechanical properties of each crystal model were obtained. The influences of co-crystallization and molar ratios on performances of cocrystal explosives were investigated and evaluated. The results show that the CL-20/TNT/HMX cocrystal explosive with a molar ratio of 3:1:2 or 3:1:3 had larger binding energy and better stability, i.e., CL-20/TNT/HMX cocrystal explosive was more likely to be formed with these molar ratios. The cocrystal explosive had shorter maximal trigger bond length, but larger trigger bond energy and cohesive energy density than CL-20, namely, the cocrystal explosive had lower mechanical sensitivity and better safety than CL-20 and the safety of cocrystal model was effectively improved. The cocrystal model with a molar ratio of 3:1:2 had the best safety. The energetic performance of the cocrystal explosive with a molar ratio of 3:1:1, 3:1:2, or 3:1:3 was the best. These CL-20/TNT/HMX cocrystal models exhibited better and more desirable mechanical properties. In a word, the cocrystal model with molar ratio of 3:1:2 exhibited the most superior properties and was a novel and potential high-energy-density compound. This paper could provide practical helpful guidance and theoretical support to better understand co-crystallization mechanisms and design novel energetic cocrystal explosives.

Keywords

Cocrystal explosives Molecular dynamics Energetic performance Binding energy Sensitivity Mechanical properties 

Notes

References

  1. 1.
    Agrawal JP (1998) Recent trends in high-energy materials. Prog Energy Combust Sci 24:1–30CrossRefGoogle Scholar
  2. 2.
    Sikder AK, Sikder N (2004) A review of advanced high performance, insensitive and thermally stable energetic materials emerging for military and space applications. J Hazard Mater 112:1–15CrossRefGoogle Scholar
  3. 3.
    Lara OF, Espinosa PG (2007) Cocrystals definitions. Supramol Chem 19:553–557CrossRefGoogle Scholar
  4. 4.
    Shan N, Zaworotko MJ (2008) The role of cocrystals in pharmaceutical science. Drug Discov Today 13:440–446CrossRefGoogle Scholar
  5. 5.
    Guo CY, Zhang HB, Wang XC, Xu JJ, Liu Y, Liu XF, Huang H, Sun J (2013) Crystal structure and explosive performance of a new CL-20/caprolactam cocrystal. J Mol Struct 1048:267–273CrossRefGoogle Scholar
  6. 6.
    Xu HF, Duan XH, Li HZ, Pei CH (2015) A novel high-energetic and good-sensitive cocrystal composed of CL-20 and TATB by a rapid solvent/non-solvent method. RSC Adv 5:95764–95770CrossRefGoogle Scholar
  7. 7.
    Yang ZW, Li HZ, Zhou XQ, Zhang CY, Huang H, Li JS, Nie FD (2012) Characterization and properties of a novel energetic–energetic cocrystal explosive composed of HNIW and BTF. Cryst Growth Des 12:5155–5158CrossRefGoogle Scholar
  8. 8.
    Wu JT, Zhang JG, Li T, Li ZM, Zhang TL (2015) A novel cocrystal explosive NTO/TZTN with good comprehensive properties. RSC Adv 5:28354–28359CrossRefGoogle Scholar
  9. 9.
    Landenberger KB, Bolton O, Matzger AJ (2013) Two isostructural explosive cocrystals with significantly different thermodynamic stabilities. Angew Chem Int Ed 52:6468–6471CrossRefGoogle Scholar
  10. 10.
    Lin H, Chen JF, Zhu SG, Li HZ, Huang Y (2017) Synthesis, characterization, detonation performance, and DFT calculation of HMX/PNO cocrystal explosive. J Energ Mater 35:95–108CrossRefGoogle Scholar
  11. 11.
    Zhang HB, Guo CY, Wang XC, Xu JJ, He X, Liu Y, Liu XF, Huang H, Sun J (2013) Five energetic cocrystals of BTF by intermolecular hydrogen bond and π-stacking interactions. Cryst Growth Des 13:679–687CrossRefGoogle Scholar
  12. 12.
    Bolton O, Simke LR, Pagoria PF, Matzger AJ (2012) High-power explosive with good sensitivity: a 2:1 cocrystal of CL-20:HMX. Cryst Growth Des 12:4311–4314CrossRefGoogle Scholar
  13. 13.
    Yang ZW, Li HZ, Huang H, Zhou XQ, Li JS, Nie FD (2013) Preparation and performance of a HNIW/TNT cocrystal explosive. Propellants Explos Pyrotech 38:495–501CrossRefGoogle Scholar
  14. 14.
    Agrawal JP (2005) Some new high-energy materials and their formulations for specialized applications. Propellants Explos Pyrotech 30:316–328CrossRefGoogle Scholar
  15. 15.
    Foltz MF, Coon CL, Garcia F, Nichols AL (1994) The thermal stability of the polymorphs of hexanitrohexaazaisowurtzitane, part I. Propellants Explos Pyrotech 19:19–25CrossRefGoogle Scholar
  16. 16.
    Chang SC, Henry PB (1970) A study of the crystal structure of β-cyclotetramethylene tetranitramine by neutron diffraction. Acta Crystallogr B 26:1235–1240CrossRefGoogle Scholar
  17. 17.
    Cady HH, Larson AC, Cromer DT (1963) The crystal of α-HMX and a refinement of the structure of β-HMX. Acta Crystallogr 16:617–623CrossRefGoogle Scholar
  18. 18.
    Zhao XQ, Shi NC (1995) Crystal structure of ε-hexanitrohexaazaisowurtzitane. Chin Sci Bull 40:2158–2160Google Scholar
  19. 19.
    Vrcelj RM, Sherwood JN, Kennedy AR, Gallagher HG, Gelbrich T (2003) Polymorphism in 2-4-6 trinitrotoluene. Cryst Growth Des 3:1027–1032CrossRefGoogle Scholar
  20. 20.
    Liu K, Zhang G, Luan JY, Chen ZQ, Su PF, Shu YJ (2016) Crystal structure, spectrum character and explosive property of a new cocrystal CL-20/DNT. J Mol Struct 110:91–96CrossRefGoogle Scholar
  21. 21.
    Lin H, Zhu SG, Li HZ, Peng XH (2013) Structure and detonation performance of a novel HMX/LLM-105 cocrystal explosive. J Phys Org Chem 26:898–907CrossRefGoogle Scholar
  22. 22.
    Wang YP, Yang ZW, Li HZ, Zhou XQ, Zhang Q, Wang JH, Liu YC (2014) A novel cocrystal explosive of HNIW with good comprehensive properties. Propellants Explos Pyrotech 39:590–596CrossRefGoogle Scholar
  23. 23.
    Lin H, Zhu SG, Zhang L, Peng XH, Chen PY, Li HZ (2013) Intermolecular interactions, thermodynamic properties, crystal structure, and detonation performance of HMX/NTO cocrystal explosive. Int J Quantum Chem 113:1591–1599CrossRefGoogle Scholar
  24. 24.
    Guo CY, Zhang HB, Wang XC, Liu XF, Sun J (2013) Study on a novel energetic cocrystal of TNT/TNB. J Mater Sci 48:1351–1357CrossRefGoogle Scholar
  25. 25.
    Landenberger KB, Matzger AJ (2010) Cocrystal engineering of prototype energetic material: supramolecular chemistry of 2,4,6-trinitrotoluene. Cryst Growth Des 10:5341–5347CrossRefGoogle Scholar
  26. 26.
    Sun H, Ren PJ, Fried R (1998) The COMPASS force field: parameterization and validation for phosphazenes. Comput Theor Polym Sci 8:229–246CrossRefGoogle Scholar
  27. 27.
    Bunte SW, Sun H (2000) Molecular modeling of energetic materials: the parameterization and validation of nitrate esters in the COMPASS forcefield. J Chem Chem B 104:2477–2489CrossRefGoogle Scholar
  28. 28.
    Michael JM, Sun H, Rigby D (2004) Development and validation of COMPASS force field parameters for molecules with aliphatic azide chains. J Comput Chem 25:61–71CrossRefGoogle Scholar
  29. 29.
    Xu XJ, Xiao HM, Xiao JJ, Zhu W, Huang H, Li JS (2006) Molecular dynamics simulations for pure ε-CL-20 and ε-CL-20-based PBXs. J Phys Chem B 110:7203–7207CrossRefGoogle Scholar
  30. 30.
    Qiu L, Xiao HM (2009) Molecular dynamics study of binding energies, mechanical properties, and detonation performances of bicyclo-HMX-based PBXs. J Hazard Mater 164:329–336CrossRefGoogle Scholar
  31. 31.
    Ma XF, Xiao JJ, Huang H, Ju XH, Li JS, Xiao HM (2006) Simulative calculation of mechanical property, binding energy and detonation property of TATB/fluorine-polymer PBX. Chin J Chem 24:473–477CrossRefGoogle Scholar
  32. 32.
    Zhu W, Xiao JJ, Zhu WH, Xiao HM (2009) Molecular dynamics simulations of RDX and RDX-based plastic-bonded explosives. J Hazard Mater 164:1082–1088CrossRefGoogle Scholar
  33. 33.
    Xiao JJ, Wang WR, Chen J, Ji GF, Zhu W, Xiao HM (2012) Study on the relations of sensitivity with energy properties for HMX and HMX-based PBXs by molecular dynamics simulation. Physica B 407:3504–3509CrossRefGoogle Scholar
  34. 34.
    Politzer P, Murray JS (2015) Impact sensitivity and maximum heat of detonation. J Mol Model 21:262CrossRefGoogle Scholar
  35. 35.
    Politzer P, Murray JS, Clark T (2015) Mathematical modeling and physical reality in noncovalent interactions. J Mol Model 21:52CrossRefGoogle Scholar
  36. 36.
    Stephen AD, Kumarashas P, Pawar RB (2011) Charge density distribution, electrostatic properties, and impact sensitivity of the high energetic molecule TNB: a theoretical charge density study. Propellants Explos Pyrotech 36:168–174CrossRefGoogle Scholar
  37. 37.
    Politzer P, Murray JS (2016) High performance, low sensitivity: conflicting or compatible. Propellants Explos Pyrotech 41:414–425CrossRefGoogle Scholar
  38. 38.
    Zhu W, Wang XJ, Xiao JJ, Zhu WH, Sun H, Xiao HM (2009) Molecular dynamics simulations of AP/HMX composite with a modified force field. J Hazard Mater 167:810–816CrossRefGoogle Scholar
  39. 39.
    Xiao JJ, Li SY, Chen J, Ji GF, Zhu W, Zhao F, Wu Q, Xiao HM (2013) Molecular dynamics study on the correlation between structure and sensitivity for defective RDX crystals and their PBXs. J Mol Model 19:803–809CrossRefGoogle Scholar
  40. 40.
    Sun T, Xiao JJ, Liu Q, Zhao F, Xiao HM (2014) Comparative study on structure, energetic and mechanical properties of a ε-CL-20/HMX cocrystal and its composite with molecular dynamics simulation. J Mater Chem A 2:13898–13904CrossRefGoogle Scholar
  41. 41.
    Xiao JJ, Zhao L, Zhu W, Chen J, Ji GF, Zhao F, Wu Q, Xiao HM (2012) Molecular dynamics study on the relationships of modeling, structural and energy properties with sensitivity for RDX-based PBXs. Sci China Chem 55:2587–2594CrossRefGoogle Scholar
  42. 42.
    Xiao JJ, Wang WR, Chen J, Ji GF, Zhu W, Xiao HM (2012) Study on structure, sensitivity and mechanical properties of HMX and HMX-based PBXs with molecular dynamics simulation. Comput Theor Chem 999:21–27CrossRefGoogle Scholar
  43. 43.
    Xu XJ, Xiao HM, Ju XH, Gong XD (2005) Theoretical study on pyrolysis mechanism for ε-hexanitrohexaazaisowurtzitane. Chin J Org Chem 25:536–539Google Scholar
  44. 44.
    Geetha M, Nair UR, Sarwade DB, Gore GM, Asthana SN, Singh H (2003) Studies on CL-20: the most powerful high energy material. J Therm Anal Calorim 73:913–922CrossRefGoogle Scholar
  45. 45.
    Guo YX, Zhang HS (1983) Nitrogen equivalent coefficient and revised nitrogen equivalent coefficient equations for calculating detonation properties of explosives: detonation velocity of explosives. Explos Shock Waves 3:57–65Google Scholar
  46. 46.
    Wang YL, Yu WL (2011) Explosives, initiators and pyrotechnics. Northwestern Polytechnical University Press, Xi’anGoogle Scholar
  47. 47.
    Hang GY, Yu WL, Wang T, Wang JT, Li Z (2017) Comparative studies on structures, mechanical properties, sensitivity, stabilities and detonation performance of CL-20/TNT cocrystal and composite explosives by molecular dynamics simulation. J Mol Model 23:281CrossRefGoogle Scholar
  48. 48.
    Ou YX (2006) Explosives. Beijing Institute of Technology Press, BeijingGoogle Scholar
  49. 49.
    Jin SH, Song QC (2010) Explosive theory. Northwestern Polytechnical University Press, Xi’anGoogle Scholar
  50. 50.
    Xiao HM, Xu XJ, Qiu L (2008) Theoretical design of high energy density materials. Science Press, BeijingGoogle Scholar
  51. 51.
    Xu XJ, Xiao JJ, Huang H, Li JS, Xiao HM (2007) Molecular dynamics simulations on the structures and properties of ε-CL-20-based PBXs-primary theoretical studies on HEDM formulation design. Sci China Ser B Chem 50:737–745CrossRefGoogle Scholar
  52. 52.
    Xu XJ, Xiao HM, Ju XH, Gong XD, Zhu WH (2006) Computational studies on polynitrohexaazaadmantanes as potential high energy density materials (HEDMs). J Phys Chem A 110:5929–5933CrossRefGoogle Scholar
  53. 53.
    Pugh SF (1954) Relations between the elastic moduli and the plastic properties of polycrystalline pure metals. Philos Mag 45:823–843CrossRefGoogle Scholar
  54. 54.
    Pettifor DG (1992) Theoretical predictions of structure and related properties of intermetallics. Mater Sci Technol 8:345–349CrossRefGoogle Scholar
  55. 55.
    Wu JL (1993) Mechanics of elasticity. Tongji University Press, ShanghaiGoogle Scholar
  56. 56.
    Weiner JH (1983) Statistical mechanics of elasticity. Wiley, New YorkGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • Gui-Yun Hang
    • 1
    Email author
  • Wen-Li Yu
    • 1
  • Tao Wang
    • 1
  • Jin-Tao Wang
    • 1
  1. 1.School of Nuclear EngineeringXi’an Research Institute of High-TechXi’anPeople’s Republic of China

Personalised recommendations