Accreditation and Quality Assurance

, Volume 23, Issue 2, pp 57–71 | Cite as

Measurements recovery evaluation from the analysis of independent reference materials: analysis of different samples with native quantity spiked at different levels

  • Rui M. S. Cordeiro
  • Constantino M. G. Rosa
  • Ricardo J. N. Bettencourt da Silva
General Paper
  • 138 Downloads

Abstract

Measurement uncertainty evaluation involves combining uncertainty components reflecting all relevant random and systematic effects: the precision and trueness uncertainty components, respectively. Typically, trueness is assessed through the analysis of various materials with known reference value, such as certified reference materials (CRMs) or spiked samples, from which it should be decided about the relevance and the need to correct measurement results for systematic effects. Algorithms proposed so far to assess systematic effects are only applicable to the analysis of the same reference material type or assume that some uncertainty components affecting evaluations are negligible or constant. This work presents detailed algorithms for the assessment of systematic effects, through the determination of recovery and the respective recovery uncertainty, applicable to the analysis of various independent reference materials, such as CRMs and spiked samples with native analyte. These algorithms are applicable to cases where native analyte and/or spiking values are associated with relevant and significantly different uncertainties allowing for a reliable assessment of systematic effects and measurement uncertainty for these complex cases. This methodology was successfully applied to the quantification of Na, K, Mg, Ca, Cr, Mn, Fe and Cu in water samples from two proficiency testing schemes, by ICP-OES, where recovery was estimated from the analysis of samples with different native concentrations and spiked at different levels. The relative expanded uncertainties of the measurement results ranged from 28.9 % to 3.9 % and are fit for the monitoring of environmental water samples in accordance with criteria set in the European Union legislation.

Keywords

Recovery Uncertainty Validation ICP-OES Metals Water 

Notes

Acknowledgements

This work was supported by Fundação para a Ciência e Tecnologia (FCT) under project UID/QUI/00100/2013 and scholarship SFRH/BPD/110186/2015. The authors would like to acknowledge the useful and constructive suggestions of the anonymous reviewers.

References

  1. 1.
    Joint Committee for Guides in Metrology (2012) International vocabulary of metrology—basic and general concepts and associated terms (VIM). BIPM, SèvresGoogle Scholar
  2. 2.
    Analytical Methods Committee (1995) Analyst 120:2303–2308CrossRefGoogle Scholar
  3. 3.
    da Silva RJNB, Santos JR, Camões MFGFC (2006) Accred Qual Assur 10:664–671CrossRefGoogle Scholar
  4. 4.
    Eurolab (2007) Measurement uncertainty revisited: alternative approaches to uncertainty evaluation. Eurolab, ParisGoogle Scholar
  5. 5.
    da Silva RJNB (2013) Water 5:1279–1302CrossRefGoogle Scholar
  6. 6.
    da Silva RJNB, Williams A (Eds) (2015) Eurachem/CITAC guide: setting and using target uncertainty in chemical measurement. Eurachem, EuropeGoogle Scholar
  7. 7.
    da Silva RJNB, Lino MJ, Santos JR, Camões MFGFC (2000) Analyst 125:1459–1464CrossRefGoogle Scholar
  8. 8.
    da Silva RJNB, Figueiredo H, Santos JR, Camões MFGFC (2003) Anal Chim Acta 477:169–185CrossRefGoogle Scholar
  9. 9.
    Correia AG, da Silva RJNB, Pedra F, Nunes MJ (2014) Accred Qual Assur 19:87–97CrossRefGoogle Scholar
  10. 10.
    Miller J, Miller J (2005) Statistics and chemometrics for analytical chemistry, 5th edn. Pearson, LondonGoogle Scholar
  11. 11.
    Thompson M, Ellison SLR, Fajgelj A, Willetts P, Wood R (1998) Harmonised guidelines for the use of recovery information in analytical measurement. IUPAC, North CarolinaGoogle Scholar
  12. 12.
    Magnusson B, Näykki T, Hovind H, Krysell M (2012) Handbook for calculation of measurement uncertainty in environmental laboratories, 3rd edn. Nordtest, OsloGoogle Scholar
  13. 13.
    da Silva RJNB, Camões MFGFC (2010) Accred Qual Assur 15:691–704CrossRefGoogle Scholar
  14. 14.
    Barwick VJ, Ellison SLR (1999) Analyst 124:981–990CrossRefGoogle Scholar
  15. 15.
    Barwick VJ, Ellison SLR (2000) VAM project 3.2.1—part (d): protocol for uncertainty evaluation from validation data. LGC, LondonGoogle Scholar
  16. 16.
    Magnusson B, Örnemark U (2014) Eurachem guide: the fitness for purpose of analytical methods—a laboratory guide to method validation and related topics, 2nd edn. Eurachem, EuropeGoogle Scholar
  17. 17.
    Rodrigues J, da Silva RJNB, Camões MFGFC, Oliveira CM (2015) Talanta 142:72–83CrossRefGoogle Scholar
  18. 18.
    Brasil B, da Silva RJNB, Camões MFGFC, Salgueiro P (2013) Anal Chim Acta 804:287–295CrossRefGoogle Scholar
  19. 19.
    Standards LGC (2015) Proficiency test report—aquacheck 1S, round 485, soft water—major inorganic components. LGC, LondonGoogle Scholar
  20. 20.
    RELACRE (2015) Relatório Final do Ensaio de Aptidão EAA Junho 2015. RELACRE, LisboaGoogle Scholar
  21. 21.
    Commission Directive 2009/90/EC laying down, pursuant to Directive 2000/60/EC of the European Parliament and of the Council, technical specifications for chemical analysis and monitoring of water status. Off J Eur Union L201:36–38Google Scholar
  22. 22.
    Council Directive 98/83/EC on the quality of water intended for human consumption. Off J Eur Union L330:32–54Google Scholar
  23. 23.
    Agência Portuguesa do Ambiente (2016) Planos de Gestão de Região Hidrográfica 2016–2021. APA, LisboaGoogle Scholar
  24. 24.
    da Silva RJNB (2016) Talanta 148:177–190CrossRefGoogle Scholar
  25. 25.
    Analytical Methods Committee (1994) Analyst 119:2363–2366CrossRefGoogle Scholar
  26. 26.
    da Silva RJNB, Santos JR, Camões MFGFC (2002) Analyst 127:957–963CrossRefGoogle Scholar
  27. 27.
    ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results—part 6: use in practice of accuracy values. ISO, GenevaGoogle Scholar
  28. 28.
    Joint Committee for Guides in Metrology (2008) Evaluation of measurement data—guide to the expression of uncertainty in measurement. BIPM, SèvresGoogle Scholar
  29. 29.
    Silva AMEV, da Silva RJNB, Camões MFGFC (2011) Anal Chim Acta 699:161–169CrossRefGoogle Scholar
  30. 30.
    ISO 13529:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons. ISO, GenevaGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany 2017

Authors and Affiliations

  • Rui M. S. Cordeiro
    • 1
    • 2
  • Constantino M. G. Rosa
    • 2
  • Ricardo J. N. Bettencourt da Silva
    • 1
  1. 1.CQE – Centro de Química EstruturalFaculdade de Ciências da Universidade de Lisboa Edifício C8LisbonPortugal
  2. 2.Labelec – EDPSacavémPortugal

Personalised recommendations