Advertisement

Acta Mechanica

, Volume 230, Issue 11, pp 4125–4135 | Cite as

Stability of corrugated expansion bellows: shell and rod models

  • Tatiana V. ZinovievaEmail author
  • Kirill K. Smirnov
  • Alexander K. Belyaev
Original Paper
  • 46 Downloads

Abstract

The problem of stability of corrugated thin-wall expansion bellows under hydrostatic internal load is considered. The bellows is modeled by an elastic rod with equivalent tensile, bending, and shear stiffness. Equations for calculating the critical value of fluid pressure at which the bellows loses stability are analytically derived, using an expression for hydrostatic follower load. The equivalent stiffness of the bellows is determined further from the solution of static problems for the elastic corrugated shell. The numerical solutions of the boundary value problems and the critical values of the pressure are obtained by the finite difference method. Additionally, a computer model of the expansion bellows was developed by ANSYS software, and the bellows stability was analyzed using shell finite elements. Calculations confirm the necessity of accounting for the axial displacement of expansion joint support when determining the critical pressure.

Notes

References

  1. 1.
    Belyaev, A.K., Zinovieva, T.V., Smirnov, K.K.: Theoretical and experimental studies of the stress–strain state of expansion bellows as elastic shells. St. Petersburg Polytech. Univ. J. Phys. Math. 3, 7–14 (2017).  https://doi.org/10.1016/j.spjpm.2017.03.003 CrossRefGoogle Scholar
  2. 2.
    Yeliseyev, V.V., Zinovieva, T.V.: Nonlinear-elastic strain of underwater pipeline in laying process. Comput. Contin. Mech. 5(1), 70–78 (2012).  https://doi.org/10.7242/1999-6691/2012.5.1.9. (in Russian)CrossRefGoogle Scholar
  3. 3.
    Eliseev, V.V.: Mechanics of Deformable Solids. Polytechnic University Press, St. Petersburg (2003). (in Russian) Google Scholar
  4. 4.
    Eliseev, V.V., Zinovieva, T.V.: Mechanics of thin-wall structures: theory of rods. Polytechnic University Press, St. Petersburg (2008). (in Russian) Google Scholar
  5. 5.
    Simo, J.C.: A finite strain beam formulation. The three-dimensional dynamic problem. Part I. Comput. Methods Appl. Mech. Eng. 49, 55–70 (1985)CrossRefGoogle Scholar
  6. 6.
    Crisfield, M.A., Jelenic, G.: Objectivity of strain measures in the geometrically exact three-dimensional beam theory and its finite-element implementation. Proc. R. Soc. Lond. Ser. A Math. Phys. Eng. Sci. 455(1983), 1125–1147 (1999)MathSciNetCrossRefGoogle Scholar
  7. 7.
    Romero, I.: The interpolation of rotations and its application to finite element models of geometrically exact rods. Comput. Mech. 34, 121–133 (2004)MathSciNetCrossRefGoogle Scholar
  8. 8.
    Meier, C., Popp, A., Wall, W.A.: Geometrically exact finite element formulations for slender beams: Kirchhoff–Love theory versus Simo–Reissner theory. Arch. Comput. Methods Eng. 26, 163–243 (2019)MathSciNetCrossRefGoogle Scholar
  9. 9.
    Humer, A.: Exact solutions for the buckling and postbuckling of shear-deformable beams. Acta Mech. 224(7), 1493–1525 (2013)MathSciNetCrossRefGoogle Scholar
  10. 10.
    Kheisina, V.V., Eliseev, V.V., Sukhanov A.A.: Forces acting on a tube in a liquid. In: Proceedings of Scientific Conference XXVII Week of Science of SPbGTU 3. St. Petersburg, Polytechnic University Press, pp. 58–59 (1999). (in Russian) Google Scholar
  11. 11.
    Yeliseyev, V.V., Zinovieva, T.V.: Nonlinear-elastic strain of underwater pipeline in laying process. Comput. Contin. Mech. 5(1), 70–78 (2012). (in Russian)CrossRefGoogle Scholar
  12. 12.
    Feodosiev, V.I.: Advanced Stress and Stability Analysis: Worked Examples. Foundations of Engineering Mechanics. Springer, Berlin (2006)Google Scholar
  13. 13.
    Panovko, Y.G., Gubanova, I.I.: Stability and Oscillations of Elastic Systems: Modern Concepts, Paradoxes and Errors. Moscow, Nauka (1987). (in Russian) Google Scholar
  14. 14.
    Tarnopolsky, YuM, Roze, A.V.: Features of the Calculation of Parts from Reinforced Plastics. Zinatne, Riga (1969). (in Russian) Google Scholar
  15. 15.
    Smirnov, K.K.: On accounting of material plastic properties when calculating the stability of metal bellows expansion joints (in Russian). In: The Development of Fast Neutron Reactor Technology with Sodium Coolant, pp. 120–130. Nizhny-Novgorod, JSC “OKBM Afrikantov” (2016)Google Scholar
  16. 16.
    Panovko, Y.G.: Mechanics of Solid Deformable Body. Lenand, Moscow (2017). (in Russian) Google Scholar
  17. 17.
    Zinovieva, T.V.: Calculation of equivalent stiffness of corrugated thin-walled tube. In: Evgrafov, A. (ed.) Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering, pp. 211–220. Springer, Switzerland (2019).  https://doi.org/10.1007/978-3-030-11981-2 CrossRefGoogle Scholar
  18. 18.
    Eliseev, V.V., Vetyukov, YuM: Finite deformation of thin shells in the context of analytical mechanics of material surfaces. J. Acta Mech. 209(1), 43–57 (2010)CrossRefGoogle Scholar
  19. 19.
    Eliseev, V.V., Vetyukov, Yu M.: Theory of shells as a product of analytical technologies in elastic body mechanics. In: Pietraszkiewicz, Gorski, (eds.) Shell Structures: Theory and applications, vol. 3. Balkema, London (2014)Google Scholar
  20. 20.
    Eliseev, V.V., Zinovieva, T.V.: Lagrangian mechanics of classical shells: theory and calculation of shells of revolution. In: Pietraszkiewicz W and Witkowski W (eds) Shell Structures: Theory and Applications Volume 4. Proceedings of the 11\(^{th}\) International conference “Shell structures: theory and applications” (SSTA 2017). October 11–13, 2017, Gdansk, Poland, pp. 73–76. Taylor & Francis Group, London (2018)Google Scholar
  21. 21.
    Zinovieva, T.V.: Calculation of shells of revolution with arbitrary meridian oscillations. In: Evgrafov, A. (ed.) Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering, pp. 165–176. Springer, Switzerland (2017).  https://doi.org/10.1007/978-3-319-53363-6_17 CrossRefGoogle Scholar
  22. 22.
    Bakhvalov, N.S., Zhidkov, N.P., Kobelkov, G.G.: Numerical Methods. Laboratory of Knowledges. Binom, Moscow (2011). (In Russian)Google Scholar
  23. 23.
    Chapra, S.C., Canale, R.P.: Numerical Methods for Engineers. McGraw-Hill Education, New York (2014)Google Scholar
  24. 24.
    Borwein, J.M., Skerrit, M.B.: An Introduction to Modern Mathematical Computing: With Mathematica, vol. XVI. Springer, Berlin (2012)CrossRefGoogle Scholar
  25. 25.
    ANSYS Inc. PDF Documentation for Release 15.0Google Scholar

Copyright information

© Springer-Verlag GmbH Austria, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Institute for Problems in Mechanical EngineeringRussian Academy of SciencesSaint PetersburgRussia

Personalised recommendations