Advertisement

Acta Mechanica

, Volume 230, Issue 6, pp 2233–2247 | Cite as

A numerical elastic–plastic contact model for a half-space with inhomogeneous inclusions and cracks

  • Jing Yang
  • Xu Wang
  • Kun ZhouEmail author
Original Paper
  • 30 Downloads

Abstract

The elastic–plastic contact problem plays an important role in predicting the mechanical properties of materials. In this paper, a semi-analytic solution is developed to investigate the plastic behaviors of a half-space with inhomogeneous inclusions and cracks under contact loading. In this solution, the plastic zones are determined based on the stress field equations and the von Mises yield criterion. The contact area and surface pressure distribution are obtained by solving a set of governing equations via a modified conjugate gradient method. The inhomogeneous inclusions are modeled as homogeneous inclusions with the initial eigenstrains plus unknown equivalent eigenstrains according to the Eshelby’s equivalent inclusion method. The cracks are treated as a collection of distributions of unknown dislocation densities according to the distributed dislocation technique. The case studies of a cylinder loaded against a half-space with inhomogeneous inclusions and vertical or horizontal cracks are conducted to explore the effects of the Young’s moduli and positions of the inhomogeneous inclusions on the plastic behavior of materials.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgements

The authors acknowledge financial support by SingaporeMaritime Institute (Grant No: SMI-2014-MA11) and the National Natural Science Foundation of China (Grant No: 11472200).

References

  1. 1.
    Anderson, T.L.: Fracture Mechanics: Fundamentals and Applications. CRC Press, Boca Raton (2005)zbMATHGoogle Scholar
  2. 2.
    Zhao, T.K., Zhu, J.M., Luo, J.: Study of crack propagation behavior in single crystalline tetragonal zirconia with the phase field method. Eng. Fract. Mech. 159, 155–173 (2016)Google Scholar
  3. 3.
    Zhou, K., Wei, R.B.: Multiple cracks in a half-space under contact loading. Acta Mech. 225(4–5), 1487–1502 (2014)MathSciNetzbMATHGoogle Scholar
  4. 4.
    Zhou, K., Wei, R.B., Bi, G.J., Wang, X., Song, B., Feng, X.Q.: Semi-analytic solution of multiple inhomogeneous inclusions and cracks in an infinite space. Int. J. Comput. Methods 12(1), 150002 (2015)MathSciNetGoogle Scholar
  5. 5.
    Dong, Q.B., Zhou, K., Wei, R.B., Luo, J., Srikanth, N.: Analysis of fluid pressure, interface stresses and stress intensity factors for layered materials with cracks and inhomogeneities under elastohydrodynamic lubrication contact. Int. J. Mech. Sci. 93, 48–58 (2015)Google Scholar
  6. 6.
    Dong, Q.B., Zhou, K.: Multiple inhomogeneous inclusions and cracks in a half space under elastohydrodynamic lubrication contact. Int. J. Appl. Mech. 7(1), 1550003 (2015)Google Scholar
  7. 7.
    Dong, Q.B., Yang, J., Wang, X., Keer, L.M., Zhou, K.: Heterogeneous structures with inhomogeneous inclusions under elastohydrodynamic lubrication contact with consideration of surface roughness. Proc. Inst. Mech. Eng. J J. Eng. 230(5), 571–582 (2016)Google Scholar
  8. 8.
    Wei, R.B., Zhou, K., Keer, L.M., Fan, Q.: Modeling surface pressure, interfacial stresses and stress intensity factors for layered materials containing multiple cracks and inhomogeneous inclusions under contact loading. Mech Mater. 92, 8–17 (2016)Google Scholar
  9. 9.
    Long, X., Wang, Y., Keer, L.M., Yao, Y.: Mechanical effects of isolated defects within a lead-free solder bump subjected to coupled thermal-electrical loading. J. Micromech. Mol. Phys. 1(1), 1650004 (2016)Google Scholar
  10. 10.
    Ren, H., Zhuang, X., Rabczuk, T.: A new peridynamic formulation with shear deformation for elastic solid. J. Micromech. Mol. Phys. 1(2), 1650009 (2016)Google Scholar
  11. 11.
    Mikata, Y.: Analytical treatment on the effective material properties of a composite material with spheroidal and ellipsoidal inhomogeneities in an isotropic matrix. J. Micromech. Mol. Phys. 1(3–4), 1640012 (2016)Google Scholar
  12. 12.
    Markenscoff, X.: On the dynamic generalization of the anisotropic Eshelby ellipsoidal inclusion and the dynamically expanding inhomogeneities with transformation strain. J. Micromech. Mol. Phys. 1(3–4), 1640001 (2016)Google Scholar
  13. 13.
    Yang, S., Sharma, P.: Eshelby’s tensor for embedded inclusions and the Elasto-Capillary phenomenon. J. Micromech. Mol. Phys. 1(3–4), 1630002 (2016)Google Scholar
  14. 14.
    Burbery, N.B., Po, G., Das, R., Ghoniem, N., Ferguson, W.G.: Dislocation dynamics in polycrystals with atomistic-informed mechanisms of dislocation–grain boundary interactions. J. Micromech. Mol. Phys. 2(1), 1750003 (2017)Google Scholar
  15. 15.
    Luo, J., Li, Z.H., Xiao, Z.M.: On the stress field and crack nucleation behavior of a disclinated nanowire with surface stress effects. Acta Mech. 225(11), 3187–3197 (2014)MathSciNetzbMATHGoogle Scholar
  16. 16.
    Zhang, Y., Zhang, X.C., Tu, S.T., Li, S.: An Eshelbian homogenization solution for a coupled stress-diffusion moving interface problem in composites. J. Micromech. Mol. Phys. 1(03n04), 1640011 (2017)Google Scholar
  17. 17.
    Pan, H.H., Weng, G.J.: Elastic-moduli of heterogeneous solids with ellipsoidal inclusions and elliptic cracks. Acta Mech. 110(1–4), 73–94 (1995)MathSciNetzbMATHGoogle Scholar
  18. 18.
    Fang, Q.H., Zhang, L.C.: Coupled effect of grain boundary sliding and dislocation emission on fracture toughness of nanocrystalline materials. J. Micromech. Mol. Phys. 1(2), 1650008 (2016)MathSciNetGoogle Scholar
  19. 19.
    Karimipour, I., Fotuhi, A.R.: Anti-plane analysis of an infinite plane with multiple cracks based on strain gradient theory. Acta Mech. 228(5), 1793–1817 (2017)MathSciNetzbMATHGoogle Scholar
  20. 20.
    Luo, J., Wang, X.: On the anti-plane shear of an elliptic nano inhomogeneity. Eur. J. Mech. A Solids 28, 926–934 (2009)zbMATHGoogle Scholar
  21. 21.
    Zhou, K., Wei, R.B.: Modeling cracks and inclusions near surfaces under contact loading. Int. J. Mech. Sci. 83, 163–171 (2014)Google Scholar
  22. 22.
    Dong, Q.B., Zhou, K.: Elastohydrodynamic lubrication modeling for materials with multiple cracks. Acta Mech. 225(12), 3395–3408 (2014)zbMATHGoogle Scholar
  23. 23.
    Wei, R., Wu, R., Zhou, K.: Fatigue crack propagation in heterogeneous materials under remote cyclic loading. J. Micromech. Mol. Phys. 1(01), 1650003 (2016)Google Scholar
  24. 24.
    Irwin, G.: Linear fracture mechanics, fracture transition, and fracture control. Eng. Fract. Mech. 1(2), 241–257 (1968)Google Scholar
  25. 25.
    Dugdale, D.S.: Yielding of steel sheets containing slits. J. Mech. Phys. Solids 8(2), 100–104 (1960)Google Scholar
  26. 26.
    Fan, M., Yi, D.K., Xiao, Z.M.: Elastic–plastic stress investigation for an arc-shaped interface crack in composite material. Int. J. Mech. Sci. 83, 104–111 (2014)Google Scholar
  27. 27.
    Yi, D.K., Xiao, Z.M., Tan, S.K.: On the plastic zone size and the crack tip opening displacement of an interface crack between two dissimilar materials. Int. J. Fract. 176(1), 97–104 (2012)Google Scholar
  28. 28.
    Yi, D.K., Xiao, Z.M., Zhuang, J., Sridhar, I.: On the plastic zone size and crack tip opening displacement of a sub-interface crack in an infinite bi-material plate. Philos. Mag. 91(26), 3456–3472 (2011)Google Scholar
  29. 29.
    Hoh, H.J., Xiao, Z.M., Luo, J.: On the plastic zone size and CTOD study for a Zener-Stroh crack interacting with a circular inclusion. Acta Mech. 220(1–4), 155–165 (2011)zbMATHGoogle Scholar
  30. 30.
    Yang, J., Zhou, K.: On elastic–plastic fracture behavior of a half-space under prescribed loading. Int. J. Appl. Mech. 9(3), 1750036 (2017)Google Scholar
  31. 31.
    Hu, K.Q., Chen, Z.T.: Dugdale plastic zone of a penny-shaped crack in a piezoelectric material under axisymmetric loading. Acta Mech. 227(3), 899–912 (2016)MathSciNetzbMATHGoogle Scholar
  32. 32.
    Hoh, H.J., Xiao, Z.M., Luo, J.: On the plastic zone size and crack tip opening displacement of a Dugdale crack interacting with a circular inclusion. Acta Mech. 210(3–4), 305–314 (2010)zbMATHGoogle Scholar
  33. 33.
    Yang, J., Fan, Q., Zeng, L., Keer, L.M., Zhou, K.: On the plastic zone sizes of cracks interacting with multiple inhomogeneous inclusions in an infinite space. Acta Mech. 1, 1–18 (2017)Google Scholar
  34. 34.
    Fan, M., Yi, D.K., Xiao, Z.M.: A Zener-Stroh crack interacting with a coated inclusion with generalized Irwin plastic zone correction. Int. J. Solids Struct. 51(19–20), 3399–3409 (2014)Google Scholar
  35. 35.
    Yang, J., Zhou, K.: Analysis of the plastic zones of cracks in an elastic-perfectly plastic half-space under contact loading. Int. J. Mech. Sci. 121, 143–150 (2017)Google Scholar
  36. 36.
    Harmain, G.A., Provan, J.W.: Fatigue crack-tip plasticity revisited—the issue of shape addressed. Theor. Appl. Fract. Mech. 26(2), 63–79 (1997)Google Scholar
  37. 37.
    Jing, P.H., Khraishi, T., Gorbatikh, L.: Closed-form solutions for the mode II crack tip plastic zone shape. Int. J. Fract. 122(3–4), L137–L142 (2003)Google Scholar
  38. 38.
    Larsson, S.G., Carlsson, A.J.: Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic–plastic materials. J. Mech. Phys. Solids 21(4), 263–277 (1973)Google Scholar
  39. 39.
    Levy, N., Marcal, P.V., Ostergren, W.J., Rice, J.R.: Small scale yielding near a crack in plane strain—finite element analysis. Int. J. Fract. Mech. 7(2), 143–156 (1971)Google Scholar
  40. 40.
    Khan, S.M.A., Khraisheh, M.K.: The anisotropic R-criterion for crack initiation. Eng. Fract. Mech. 75(14), 4257–4278 (2008)Google Scholar
  41. 41.
    Gao, X., Wang, H.G., Kang, X.W., Jiang, L.Z.: Analytic solutions to crack tip plastic zone under various loading conditions. Eur. J. Mech. A Solids 29(4), 738–745 (2010)Google Scholar
  42. 42.
    Zhou, K., Chen, W.W., Keer, L.M., Ai, X.L., Sawamiphakdi, K., Glaws, P., Wang, Q.J.: Multiple 3D inhomogeneous inclusions in a half space under contact loading. Mech. Mater. 43(8), 444–457 (2011)Google Scholar
  43. 43.
    Wang, Z.J., Wang, W.Z., Hu, Y.Z., Wang, H.: A numerical elastic–plastic contact model for rough surfaces. Tribol. Trans. 53(2), 224–238 (2010)Google Scholar
  44. 44.
    Chen, W.W., Zhou, K., Keer, L.M., Wang, Q.J.: Modeling elasto-plastic indentation on layered materials using the equivalent inclusion method. Int. J. Solids Struct. 47(20), 2841–2854 (2010)zbMATHGoogle Scholar
  45. 45.
    Shen, F., Yuan, S., Guo, Y., Zhao, B., Bai, J., Qwamizadeh, M., Chua, C.K., Wei, J., Zhou, K.: Energy absorption of thermoplastic polyurethane lattice structures via 3D printing: modeling and prediction. Int. J. Appl. Mech. 8(7), 1640006 (2016)Google Scholar
  46. 46.
    Dumas, G., Baronet, C.N.: Elastoplastic indentation of a half-space by an infinitely long rigid circular cylinder. Int. J. Mech. Sci. 13(6), 519 (1971)Google Scholar
  47. 47.
    Luo, J., Shu, D.W., Shi, B.J., Gu, B.: The pulse width effect on the shock response of the hard disk drive. Int. J. Impact Eng. 34(8), 1342–1349 (2007)Google Scholar
  48. 48.
    Nelias, D., Boucly, V., Brunet, M.: Elastic–plastic contact between rough surfaces: proposal for a wear or running-in model. J. Tribol. Trans. ASME 128(2), 236–244 (2006)Google Scholar

Copyright information

© Springer-Verlag GmbH Austria, part of Springer Nature 2019

Authors and Affiliations

  1. 1.School of Mechanical and Aerospace EngineeringNanyang Technological UniversitySingaporeSingapore
  2. 2.College of Mechanical EngineeringZhejiang University of TechnologyHangzhouChina
  3. 3.School of Mechanical and Power EngineeringEast China University of Science and TechnologyShanghaiChina

Personalised recommendations