Advertisement

Acousto-elastic theory for the coupling parameters in terms of nonlinear elastic, piezoelectric, electrostrictive, and dielectric constants in trigonal and hexagonal crystalline systems: applied in the crystal and solid-state physics

  • Farid Takali
  • Souhir Msedi
  • Cherif Othmani
  • Anouar Njeh
  • Wolfgang Donner
  • Mohamed Hedi Ben Ghozlen
Original Paper
  • 19 Downloads

Abstract

The aim of the acousto-elastic theory was to measure ultrasonic velocity changes which characterize the mechanical nonlinearity of a prestressed material. In this context, our purpose is to tabulate the invariant third-order elastic coefficients including the piezoelectric, electrostrictive, and dielectric corrections. The investigation is limited to trigonal and hexagonal crystalline structures, which represent the most often encountered symmetry classes for the piezoelectric materials. In fact, the enumeration includes the high-order tensors involved in the analysis of nonlinear behaviors associated with various electromechanical coupling forms. The obtained results are extensions to previous calculations in this area which bring some corrections to certain published combinations related to the invariance rules. The numerical procedure built using the software MATLAB is based on coordinate system transformations performed on the eigenbasis of their corresponding symmetry axes three- and sixfold. In this purpose, we found some contradictions between our results and a former paper published in Journal of Applied Physics. To the authors’ knowledge, rechecking of the relationships between the invariant third-order constants and comparison with this last reference has not been discussed yet. The relationships between the invariant third-order coefficients presented in this work provide a number of attractive properties for use in mechanical and physical applications.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgements

The authors are grateful for the funding provided to LPM laboratory by the Tunisian Ministry of Higher Education, Scientific Research. The authors would like to thank the anonymous reviewers for their valuable comments.

References

  1. 1.
    Kaczmarek, M., Hribek, P., Eason, R.W.: Near-infrared incoherent coupling and photorefractive response time of ’blue’ Rh:BaTiO3. Opt. Commun. 136, 277–282 (1997)CrossRefGoogle Scholar
  2. 2.
    Cantrell, J.H., Salama, K.: Acousto-elastic characterisation of materials. Int. Mater. Rev. 36, 125–145 (1991)CrossRefGoogle Scholar
  3. 3.
    Chaudhary, S., Sahu, S.A., Singhal, A.: Analytic model for Rayleigh wave propagation in piezoelectric layer overlaid orthotropic substratum. Acta Mechanica 228, 495–529 (2017)MathSciNetCrossRefGoogle Scholar
  4. 4.
    Ezzin, H., Ben Amor, M., Ben Ghozlen, M.H.: Propagation behavior of SH waves in layered piezoelectric/piezomagnetic plates. Acta Mechanica 228, 1071–1081 (2017)CrossRefGoogle Scholar
  5. 5.
    Othmani, Cherif, Takali, Farid, Njeh, Anouar: Theoretical study on the dispersion curves of Lamb waves in piezoelectric-semiconductor sandwich plates GaAs-FGPM-AlAs: Legendre polynomial series expansion. Superlattices Microstruct. 106, 86–101 (2017)CrossRefGoogle Scholar
  6. 6.
    Othmani, Cherif, Takali, Farid, Njeh, Anouar: Modeling of phase velocity and frequency spectrum of guided Lamb waves in piezoelectric-semiconductor multilayered structures made of AlAs and GaAs. Superlattices Microstruct. 111, 396–404 (2017)CrossRefGoogle Scholar
  7. 7.
    Othmani, C., Takali, F., Njeh, A., Ghozlen, M.H.B.: Numerical simulation of Lamb waves propagation in a functionally graded piezoelectric plate composed of GaAs-AlAs materials using Legendre polynomial approach. Optik 142, 401–411 (2017)CrossRefGoogle Scholar
  8. 8.
    Othmani, C., Takali, F., Njeh, A.: Investigating and modeling of effect of piezoelectric material parameters on shear horizontal (SH) waves propagation in PZT-5H PMN-0.33PT and PMN-0.29PT plates. Optik 148, 63–75 (2017)CrossRefGoogle Scholar
  9. 9.
    Othmani, C., Takali, F., Njeh, A.: Legendre polynomial modeling for vibrations of guided Lamb waves modes in [001]c, [011]c and [111]c polarized (1-x)Pb(Mg1/3Nb2/3)O3–xPbTiO3 (x=0.29 and 0.33) piezoelectric plates: physical phenomenon of multiple intertwining of A\(_{n}\) and S\(_{n}\) modes. Eur. Phys. J. Plus 132, 504 (2017)CrossRefGoogle Scholar
  10. 10.
    Ezzin, H., Ben Amor, M., Ben Ghozlen, M.H.: Lamb waves propagation in layered piezoelectric/piezomagnetic plates. Ultrasonics 76, 63–69 (2017)CrossRefGoogle Scholar
  11. 11.
    Ezzin, H., Mkaoir, M., Ben Amor, M.: Rayleigh wave behavior in functionally graded magneto-electro-elastic material. Superlattices Microstruct. 112, 455–469 (2017)CrossRefGoogle Scholar
  12. 12.
    Qian, Z.H., Jin, F., Li, P., Hirose, S.: Bleustein-Gulyaev waves in 6mm piezoelectric materials loaded with a viscous liquid layer of finite thickness. Int. J. Solids Struct. 47, 3513–3518 (2010)CrossRefGoogle Scholar
  13. 13.
    Takali, F., Njeh, A., Schneider, D., Ben Ghozlen, M.H.: Surface acoustic waves propagating in epitaxial ZnO/-Al\(_{2}\)O\(_{3}\) thin fil. Acta Acustica United Acustica 98, 223–231 (2012)CrossRefGoogle Scholar
  14. 14.
    Crecraft, D.I.: The measurement of applied and residual stresses in metals using ultrasonic waves. J. Sound Vib. 5, 173–192 (1967)CrossRefGoogle Scholar
  15. 15.
    Rao, R.R., Padmaja, A.: Effective second-order elastic constants of a strained cubic crystal in the finite strain theory. J. Appl. Phys. 64, 3320–3322 (1988)CrossRefGoogle Scholar
  16. 16.
    Mseddi, S., Njeh, A., Ben Ghozlen, M.H.: Acousto-elastic effects in anisotropic layered structure of Cu/Si(001). Mech. Adv. Mater. Struct. 21, 710–715 (2014)CrossRefGoogle Scholar
  17. 17.
    Kamel, M., Mseddi, S., Njeh, A., Donner, W., Ben Ghozlen, M.H.: Acousto-elastic effect of textured (Ba, Sr)TiO3 thin films under an initial mechanical stress. J. Appl. Phys. 118, 225305 (2015)CrossRefGoogle Scholar
  18. 18.
    Gerlich, D., Breazeale, M.A.: Ultrasonic second harmonic generation in various crystalline systems. II. Piezoelectric materials: coupling parameters in terms of elastic and piezoelectric moduli and propagation directions. J. Appl. Phys. 68, 5118–5124 (1980)Google Scholar
  19. 19.
    Brendel, R.: Material nonlinear piezoelectric coefficients for quartz. J. Appl. Phys. 54, 5339 (1983)CrossRefGoogle Scholar
  20. 20.
    Brugger, K.: Thermodynamic definition of higher order elastic coefficients. Phys. Rev. 133, A1611 (1964)CrossRefGoogle Scholar
  21. 21.
    Njeh, A., Wieder, T., Schneider, D., Fuess, H., Ben Ghozlen, M.H.: Surface wave propagation in thin silver films under residual stress. Z. Naturforsch. 57, 58–64 (2002)Google Scholar
  22. 22.
    Takali, F., Njeh, A., Ben Ghozlen, M.H.: Ordinary differential equation applied to ultrasonic wave propagation in piezoelectric material. OP Conf. Ser. Mater. Sci. Eng. 13, 012022 (2010)CrossRefGoogle Scholar
  23. 23.
    Royer, D., Dieulesaint, E. : Ondes élastique dans les solides “tome I” (1974)Google Scholar
  24. 24.
    Every, A.G., McCurdy, A.K.: Landolt-Bornstein Group III: Crystal and Solid State Physics. Low Frequency Properties of Dielectric Crystals, Subvolume A: Second and Higher Order Elastic Constants, pp. 638–641. Springer, Berlin (1992)Google Scholar

Copyright information

© Springer-Verlag GmbH Austria, part of Springer Nature 2018

Authors and Affiliations

  • Farid Takali
    • 1
    • 2
  • Souhir Msedi
    • 1
  • Cherif Othmani
    • 3
  • Anouar Njeh
    • 1
  • Wolfgang Donner
    • 4
  • Mohamed Hedi Ben Ghozlen
    • 1
  1. 1.Laboratory of Physics of Materials, Faculty of Sciences of SfaxUniversity of SfaxSfaxTunisia
  2. 2.National School of Engineers of Sfax (ENIS)SfaxTunisia
  3. 3.Department of Civil EngineeringZhejiang UniversityHangzhouChina
  4. 4.Strukturforschung, Fachbereich 11, Material-und GeowissenschaftenTechnical University DarmstadtDarmstadtGermany

Personalised recommendations